Become a member of this channel! Get custom badges and emojis you can use during chats: kzfaq.info/love/j4SLNED1DiNPHComZTCbzwjoin
Пікірлер: 57
@hmingsangahauhnar3019 ай бұрын
Maybe you are not for the first world country, where everyone use cool tools...but here in some remote place in the world you are such a blessing
@zbnmth9 ай бұрын
You overestimate the amount of people who can actually afford the "cool" tools... The VAST majority, even in the richest countries, can't afford them. Remember: country's GDP =\= welfare of the people. Source: I live in the Netherlands, and only people in the highest income bracket can afford those "cool" tools you refer to.
@pawa3038 ай бұрын
He’s definitely a blessing for the working/middle class people in the first world countries too.
@modernNeanderthal8005 ай бұрын
These tools work because it's more about the skill or wisdom to use the available tools. This channel highlights classic tools that have withstood the test of time by being simple, economical and effective.
@madmax829889 ай бұрын
At least you're honest, Rex
@drwaluOFczwimpix9 ай бұрын
You are my favourite bald wood guy. Hope Wright doesn't see this.
@robertchitty36039 ай бұрын
Those HF clamps are perfect for welding though; idc if the clamp "accidentally" becomes one with my project
@ourtube42665 ай бұрын
Harbor Freight makes great tools! You’d be surprised how good a “bad” tool can be when your hobby budget is low low low
@onZampie9 ай бұрын
I really appreciate the approach you have to shorts. I watch pretty much all of your videos yet i still get value out of these short tips.
@TalRohan2 ай бұрын
Clamps are the one thing that I seriously do not have enough of....I could spend a fortune on the things and still not have enough
@mantaship4 ай бұрын
Rex, these are Masterclass nuggets in digestable pieces... and I love them.
@Riptide25333 ай бұрын
I have a set of harbor freight wood chisels and plains. They are amazing, after i spent several days sharpening them. But for $20 they get the jub done.
@Tater13379 ай бұрын
a moxon vice clamp made with two 2x2 and some allthread is stupid cheap and can be suprisingly versatile
@MattMcConaha5 ай бұрын
I've never had a problem with harbor freight C or F style clamps. They're great. I don't love the cheap tiny quick clamps, the plastic on them has broken on me before.
@OutletVibes4 ай бұрын
I only find issues with the quick release button itself often having too much torque on it to depress the button.
@mercoid9 ай бұрын
Any clamp 🗜️ available to me, used in any way possible to get the job done. If something isn’t working well for me I’ll find a way.
@joeleonetti89768 ай бұрын
I keep the middle one you talked about, the bar clamp. I got one 12" long and use it all the time. Comes in real handy. I kind of discovered this when I was taking a woodworking class and wasn't at my bench and had to figure out alternative ways to clamp and work. Love my little bar clamp. Don't use my C clamps as much but they are handy from time to time.
@Normal1855Ай бұрын
Harbor Freight tools are great. I own quite a few of them.
@johnford78479 ай бұрын
I don't know why, but I don't like C-clamps. But I do use bar clamps and hand-screw clamps frequently. Good video.
@theidlehandsworkshop38849 ай бұрын
Damn Rex, tell us how you really feel about Harbor Fright lol.... love the honesty !!!
@12grain4 ай бұрын
Clamps make for great substitutes if you can't afford/don't have the space for a larger vise. I've been learning how to woodwork out of my garage on a 2x3' bench I built myself with a tiny vise and clamps for larger pieces - whole setup probably cost me less than $200
@OutletVibes4 ай бұрын
Those harbor freight c-clamps cost like $5 and for the money, totally worth it if you're just starting out.
@scottswineford67149 ай бұрын
I use the deep reach sheet metal visegrips all the time
@David-bc4rh5 ай бұрын
I've been looping ropes around the glue up and run a stick through two bowline knots at either end, and twist until tight. I learned that from Jeff Bridges on Planet of the Apes.
@sarkycutt96115 ай бұрын
We call them G clamps in the UK
@horsejackmanbo72924 ай бұрын
Yeah that just sounds like a condition your gynaecologist should deal with.
@TalRohan2 ай бұрын
@@horsejackmanbo7292 thats a C spot
@timurseren6004Ай бұрын
I always clamp my pieces as close on the table as possible so I can rest my elbows or sometimes even forearms for better tool control and less fatigue of holding them up for a longer period of time. Is this something I should train myself not to do and learn to build dexterity or is it fine 😅
@MightyHawx4 ай бұрын
Clamps are one of the few things where quality aint that important imo. The cheap ones do exactly the same thing as the expensive ones.
@Critter1455 ай бұрын
Harbor Freight clamps are great for holding your trash can to the floor.
@jipillow16 ай бұрын
Harbor freight clamps are S tier
@martinlee55819 ай бұрын
I appreciate the video, however I can’t help but notice you call them “c clamps” and I’ve never heard that before. Personally for me it’s a G clamp but each to their own 😄
@lw8882Ай бұрын
Can confirm. Bought some cheap as chips C clamps as my first work holders. Some are total dogshit, but there's a few that are actually good.
@CodyBrandt5809 ай бұрын
Why does everyone hate on Harbor Freight 😂
@brianhdenver75519 ай бұрын
Because “even though they’re total ****”. I have them, will buy them again, will even recommend a few of them, and totally concur with Rex’s closing statement.
@theidlehandsworkshop38849 ай бұрын
I honestly love them and have even mentioned them in my videos and articles... with the simple care and maintenance you should give to any tool, they can last for quite a while
@magnificatscriptorium3 ай бұрын
Lady at the local harbor freight gets really pissy with me when I refuse to give my number for “warranty” purposes. Lady, I’m not gonna return these crummy $3 clamps lol
@thorjohnson52379 ай бұрын
Just don't use the Harbor Freight with the pushbutton release...
@joeseabert83919 ай бұрын
That was funny
@montelott85709 ай бұрын
Their total "_ _ _ _" but you're still in posession?
@SkyForgeVideos9 ай бұрын
While these clamps may be "fine" for working with hand tools im going to say they are a hard pass for anything with power tools. The vibrations from power tools will cause the screw to release pressure and come unclamped. Not to mention the additional fiddleyness of having to have clamps big enough to clamp the workpiece PLUS the additional sacrificial blocks to protect it that mean you lose even more of the clamping power overall. Instead I would HIGHLY recommend investing in a set of aluminum body quick release clamps. Mine are made by a company called "Pro Point" which is sold by Princess Auto (Canadian Harbor Freight). They are Quick Release (duh), have rubber padding to protect your work, and because they are aluminum body with a cam clamping system they can provide up to 750lbs of clamping power... Each. I would suggest at least 2 of the 12" models for most work, and the larger sizes for glue-ups. They can be kind of pricey, but if you get them on sale its basically 2 for 1. Easily the best woodworking clamps I have ever used. It's like hsving a whole other person with The Incredible Hulk's grip strength helping to hold your work. And they don't marr up your tables or work surface either. After using them I wont use anything else now... If I can help it.
@Kryynism9 ай бұрын
I used a handful of metal c clamps for years before bothering to change it up. They work great
@valuepurposemission75174 күн бұрын
yay HF POS :))
@raulkaap9 ай бұрын
These shorts keep getting more vulgar. Great.
@andrewstorer48759 ай бұрын
Finally some quality content
@raulkaap9 ай бұрын
@@andrewstorer4875 Yeah!
@palladinionmlg32919 ай бұрын
We actually need more videos of this type
@JohnGauntSega329 ай бұрын
He seems to be trying a different twist on straight woodworking shorts. He's delivering all of the information and throwing in a coarse word at the end.
@jimthesoundman86419 ай бұрын
Go Gators!
@peterbrill10179 ай бұрын
In the words of Andy's lil homestead If u gotta use Chinese tools....pay only Chinese prices
@Handles_arent_a_needed_feature5 ай бұрын
Arent those G clamps
@Mr2at9 ай бұрын
lol
@ianpearse44809 ай бұрын
But what about the clamps? LOL.
@markoesterling52578 ай бұрын
You're gonna put your eye out with how much that long clamp is hanging off the bench. ;-)
@rudispruell8834 ай бұрын
😂😂😂
@thomasharrison14434 ай бұрын
Not c ... g clamps
@TalRohan2 ай бұрын
Are you English? ..I call them G clamps too....mainly because like most people here I see a capital G when I use them