Checking and Setting Ride Height // HOW-TO VIDEO

No video

Checking and Setting Ride Height // HOW-TO VIDEO

Рет қаралды 23,211

Жыл бұрын

In this video, Steve walks us through how to check your ride height, shows us how to adjust your stock setup, and explains why our Dual-Rate Spring Kit might just be the gear you need for your dream setup!
Thank you for watching our video! Shock Therapy is a world-class suspension tuning and component company based in Phoenix, Arizona. We make original products right here in the USA and ship worldwide to all customers. Whether you are a casual owner or a racing enthusiast, Shock Therapy makes sure to place you FIRST. Purchase our Limit Straps, Dual-Rate Spring Kits, Sway Bars, Tie Rods, Ride-Improvement Systems and more at www.shockthera...
For more information on Shock Therapy, keep up with us on our other Social Media:
FACEBOOK | / shocktherapyllc
INSTAGRAM | / shocktherapyusa
Subscribe to our KZfaq channel: / shocktherapyllc

Пікірлер: 27

@surfntchr Жыл бұрын

Added the dual rate to myXP1000 made a night and day difference. Had you re-valve/and rebuild and it's even better!

@ShockTherapyllc Жыл бұрын

Hell ya! 🤘🏻

@radiolotek Жыл бұрын

You should show a tire size to height chart to make it easy. Also, is there a video to set up the crossover collar? I got a set of your springs and need to put them on. I'm excited to see the difference. 2021 X3 max RR

@ShockTherapyllc 11 ай бұрын

In general, rear crossover will be 2” above spring divider and front at 1”. But check the video for your specific vehicle.

@ssantac 5 ай бұрын

Thanks for the vids, I'm learning a lot! Do you happen to have the ride height for a Can Am Defender? If it matters its an 18 HD10 max XT

@ShockTherapyllc 5 ай бұрын

13.5-14” stock tires. Add 1/2” ride height for every extra inch of tire over stock

@russellcorcoran2231 2 ай бұрын

I watch a lot of videos, and I still don't think I did it right. I have 8in between the springs in the rear end. They seem really tight. I read that was factory recommended. What is your recommendation?

@ShockTherapyllc 2 ай бұрын

Email us your specs and or pictures of your setup to sales@shocktherapy.com so we can see what needs to be adjusted.

@planb8520 Жыл бұрын

Hey guys great explanation.👌 Is this method of using tire size a good rule of thumb for other vehicles? eg ranger/silverado desert truck?

@ShockTherapyllc Жыл бұрын

Yes. Works for everything.

@unitymixer 11 ай бұрын

Wait, what? . The cross-over locknut should be 2 inch upper the spring dividers ?

@ShockTherapyllc 11 ай бұрын

Every spring kit and UTV can be slightly different. Check your car specific settings but in general 2” rear 1” front is a good starting point.

@JDHarpr Жыл бұрын

A rzr pro xp with 32" tires. Where do you want the ride height at? What number do you start with? The height listed from the factory?

@ShockTherapyllc Жыл бұрын

16” front. 15.5 rear with you in it. 👍🏼

@ddipalermo Жыл бұрын

Should you measure off the tires for polaris as well to determine ride height?

@aaronchamberlain1638 Жыл бұрын

yes

@fernandorivera8663 8 ай бұрын

I have a Turbo S with ur sprint kit. Can i adjust height with coilovers on the car?

@ShockTherapyllc 8 ай бұрын

Absolutely you can. Easier if you Jack the car up. 👍🏼

@Degen.Diesel 8 ай бұрын

What kind of ride hight should i shoot for on a 23 yxz with 32s

@ShockTherapyllc 8 ай бұрын

15” or so. 🤘🏻

@FreedomIsntFree2023 2 ай бұрын

So 16.5" ride height in the rear with four grown men in the car?? Really curious what the height is without the guys in the car......I bet that thing looks like a "monster truck".....

@ShockTherapyllc 2 ай бұрын

With no riders it's going to sit pretty tall, we always set ride heights loaded with gear and passengers so it's correct when your riding.

@bretroukema 11 ай бұрын

What spring compressor are you using with the shocks still installed when you are doing the pre-load adjustment?

@ShockTherapyllc 11 ай бұрын

Jack tech. Amazon🤘🏻

@JohnnyMoseley 5 ай бұрын

@@ShockTherapyllc Can you confirm this. I have the Jacktech 3500 but your using a compressor without removing the spring and it looks like its only one side of spring vs the normal 2 piece design you see for sale. What model number compressor did you use on spring without removing it from buggy?

@ShockTherapyllc 5 ай бұрын

@@JohnnyMoseleyhere is the smaller one we use a.co/d/6hq7pgp

@JohnnyMoseley 5 ай бұрын

@@ShockTherapyllc Thanks. Exactly what I was looking for.