Engine head leak. Engine head work. Thanks for watching, also subscribe to our channel !
Пікірлер: 177
@johndemeen55752 жыл бұрын
That little boy, has man hands! No fun filled childhood, for him! Thanks from. St. Paul Minnesota.
@drlegendre2 жыл бұрын
Howdy, neighbor.
@PakistaniTrucker2 жыл бұрын
Thank you so much guys, most of the workshops have kids working & learning here. Most of them are very poor & they are supporting their families ❤️❤️
@51-FS2 жыл бұрын
I used to stay in woodberry
@nealbeard12 жыл бұрын
That little boy should be learning in school. That is how people improve their conditions.
@deconteesawyer57582 жыл бұрын
@@nealbeard1 He is, enrolled in trade school.
@OLEGIN2 жыл бұрын
Ого,у них там даже электричество есть?
@robj27042 жыл бұрын
I grew up in my father's rural garage in the 1960's. I learned enough that I was able to do car restorations over the years.
@PakistaniTrucker2 жыл бұрын
❤️
@naviluminor2 жыл бұрын
This little boy makes you want to have him in our workshop, he deserves to learn a lot and in good conditions, he is already very strong
@georgegonzalez24762 жыл бұрын
Ah, no, he should be in school, instead of getting poisoned.
@nealbeard12 жыл бұрын
That little boy should be learning in school. That is how people improve their conditions.
@naviluminor2 жыл бұрын
@@nealbeard1 Yes of course, he deserves to go to school and be surrounded by a very good teacher (in mechanics if he likes this field), he is intelligent
@waynesanders54092 жыл бұрын
That young man will b an excellent mechanic and he’s already got all these American kids beat by a mile good job young man
@JohnSmith-yp6oj2 жыл бұрын
Чо-то перебор даже для меня... 1)Нафиг этот карбид, когда у них на заднем фоне компрессор гудит? Штуцер сделали бы в крышке и дали бы бара 3 не больше. А сколько там этот карбид давил? 2) Если они знали, что направляйки и сёдла менять не будут, может не стоило клопы обезличивать и в общий таз валить? Я понимаю, что фрез для прирезки нету или клиент не заказывал замену направляек, но неужели и фломика у них нет, чтоб цифорки на тарелках проставить? Всё таки приработаны уже клопы к направляйкам.
@fainderskurs-koi87672 жыл бұрын
Лайк. Судя по лицам, то момент затяжки определяется, именно по ним. С какой силой нужно затянуть, такое лицо и зовут.)))
@U.F.O.Technology2 жыл бұрын
Пацан м8-м10 ток крутит.Ступицы кабаны.
@Hositcaos2 жыл бұрын
Uauuu non avevo mai visto fare la prova idraulica con la acetilene , bravissimi
@hytorvgorode2 жыл бұрын
Опрессовка ГБЦ карбидом вот это технология!
@manterkukurterengganu29472 жыл бұрын
Good job brother... Alhamdulillah..
@DOYDra872 жыл бұрын
god job👍
@jeffmitchell89172 жыл бұрын
injector tubes are leaking
@keleneurban37642 жыл бұрын
I guess a $25,000 Matco tool box is not needed in any country other then in America where the mechanics are useless. 💪
@davidj46622 жыл бұрын
The tool guys wait outside the trade schools and get the new graduates to sign a contract for 50 thousand in tools.
@jamesmiller79112 жыл бұрын
They fix nothing, just throw parts at it until it runs again.
@69uremum2 жыл бұрын
Exactly, those 3rd world places totally have better schools and equipment for mechanics to accomplish their work with a high standard of craftsmanship. Mechanics that can afford a 25,000$ toolbox, plus the cost of tools must be complete shade-tree hacks that can't get work. You don't need any diagnostic tools or anything like torque wrenches to work on modern equipment that cost many hundreds of thousands of dollars, in America our large scale farming is done all by hand because the mechanics are useless when it comes to fixing equipment.......
@keleneurban37642 жыл бұрын
Tools can't replace common sense and good worth ethics
@agt1552 жыл бұрын
If it wasn't for Western tech these guys would just be using a rock to hit another rock.
@a..5132 жыл бұрын
Паренёк молодец. Толковый растёт.
@Traktorok_mini2 жыл бұрын
И с образованием тема закрыта....Моторист.
@oleg_saveliev2 жыл бұрын
Интересная идея проверять герметичность головы карбидом.
@almircorreia23522 жыл бұрын
Muito bom mesmo gosto muito do trabalho de vocês Deus abençoe a todos 👏👏👏👏👏👏👏👏❤❤👍
@jocyelpinho72492 жыл бұрын
Pensei que era só eu que via esses vídeos no Brasil 🤣
@janjanmotorworks1106 Жыл бұрын
nice job my friend
@davidj46622 жыл бұрын
I love watching these guys work, they are awesome.
@PakistaniTrucker2 жыл бұрын
Thank you so much David ❤️
@jonnybrawo83932 жыл бұрын
Sam nie wiem co lepsze, czy turlanie głowicy w piachu po betonie, czy dobijanie młotkiem zaworów w gnieździe, gdzie i tak trzonek opiera się o beton na którym leży 🤦♂️ Ciapacka robota 👍👍🤣🤣
@bigred1247 Жыл бұрын
😆😍🤣😂😂🤑🤪🤪
@edgarasvas2 жыл бұрын
You had to mark each valve and put it in same place where it was, unless whey are new.
@africanelectron7512 жыл бұрын
Look at you Mr fancy pants...
@eduardosampoia54802 жыл бұрын
even if they are new you still have to match them with the proper location...but shitholia
@Jivi_vecno2 жыл бұрын
Момент затяжки измеряется в силу подростка. 🤷♂️
@BBQandStreetCars2 жыл бұрын
They say if you're old enough to hold a tool you're going to work. No school or childhood for this kid. He's gonna be a good mechanic one day. Not a professional or proper mechanic but a good mechanic by their standards. 😆
@herborge12 жыл бұрын
Q
@anokkelantan38702 жыл бұрын
We don't know what can be happen to this boy,,, maybe he will be a very professional mechanic,,but i have learn something from this video,,,we Don't need a good tool but we need a good idea n we must use our brain not only just talk but nothing to do,,,
@BBQandStreetCars2 жыл бұрын
@@anokkelantan3870 working on a cylinder head on the dirty ground isn't professional. Using a mallet and socket by banging on the valve springs to get the keepers out isn't professional either. If he doenst change how he does things or where he does things he will never be considered a professional. Professionals never work on engines or cylinder heads on the dirty ground where you can do more damage than good. Even if youre just tearing the engine down you wouldn't do it in the dirt. You always work in a clean environment. Its seems like in alot of these videos they dont care and are just trying to make a quick buck.
@schraubschrauber98462 жыл бұрын
Minute 7:42 the man in blue on the left! It couldn't be better.
@ppQmaister2 жыл бұрын
@@BBQandStreetCars professionals get paid to do something.
@gestaosoares48772 жыл бұрын
Bom trabalho 👍👍👍👍🇧🇷
@PakistaniTrucker2 жыл бұрын
❤️❤️
@schraubschrauber98462 жыл бұрын
Minute 7:42 the man in blue on the left! It couldn't be better.
@user-om9qz7so4p2 жыл бұрын
А дядька в синем платье походу директор СТО!
@user-em6mz8pw8j2 жыл бұрын
Good job 👍 👍👏👏👏👏
@PakistaniTrucker2 жыл бұрын
Thanks ❤️
@hajreza90182 жыл бұрын
اگر شرایط کار باشه میایید تهران؟
@alanisraelcosta75502 жыл бұрын
Esses sao da hora Esse motor vai fica bao kkkkk
@ferd.67792 жыл бұрын
Goed werk! ouderwets maar degelijk, continue ;-))
@sandrakemkers31582 жыл бұрын
man wat is hier goed aan?. lekker ongeïnteresseerd knoeien.
@rationalguy27442 жыл бұрын
That's how to get things done. Let nothing stop you. The young man looks like the apprentice who is learning every day, carrying on the knowledge of experience from the master mechanic.
@PakistaniTrucker2 жыл бұрын
Right, thanks for your comments ❤️
@nealbeard12 жыл бұрын
That little boy should be learning in school. That is how people improve their conditions.
@likeaboss8602 жыл бұрын
@@nealbeard1 maybe 100 years ago better off today with actual skills and common sense.
@robj27042 жыл бұрын
Poor man's magnafluxing.
@carlosalbertojacquisepulve8722 жыл бұрын
Excelentes mecánicos con herramientas precarias i mucha inteligencia en sus x cabezas
@davidschwartz51272 жыл бұрын
What is the substance they crushed up with the hammer and put in the cooling jacket with hot water to create the hi-pressure?
@sandrakemkers31582 жыл бұрын
carbide, used to make gas for welding in the old days
@atlasflame25102 жыл бұрын
@@sandrakemkers3158 its still use today, in asia
@mickeymomighty56602 жыл бұрын
@@sandrakemkers3158 as children we used carbide to shoot for the New Year
@mauric_22712 жыл бұрын
good work👍
@user-xz6kf7qp5o2 жыл бұрын
10:20 Новая раскоксовка от лавр 😂😂😂😂
@albegt982 жыл бұрын
good job man ;-)
@PakistaniTrucker2 жыл бұрын
Thanks ❤️
@rust29852 жыл бұрын
Bad injector cups?
@michalstefanko30342 жыл бұрын
I guess its better than having a work table to work on
@brianjebe77972 жыл бұрын
They like this position evidently.
@jeffren702 жыл бұрын
What di they put in there to make the pressure?
@loosehandle12 жыл бұрын
It was carbide, makes acetylene gas and causes pressure, don't know how safe it is
@northmanlogging27692 жыл бұрын
@@loosehandle1 odorless(the bottled stuff is odorized), toxic as frig, and highly flammable perfectly safe... what could possibly go wrong?
@sabahattinyuruk83542 жыл бұрын
Slm allah kolaylik versin insallah
@jonanderson65322 жыл бұрын
Did they fix the mofo or not?
@user-lv8kd9fn7w2 жыл бұрын
А я к пасте притирочной "жидкий ключ" чуть брызгаю
@trajtemberg2 жыл бұрын
Workbench? never heard of it.
@6h4712 жыл бұрын
Have these people never heard of a work bench? I've never seen so much crawling around in the dirt.
@agt1552 жыл бұрын
It's a crazy culture when no one in the family business invests for the future.
@user-mt5oj1qg3q2 жыл бұрын
Малодец!!!
@viktorvladimirovich83982 жыл бұрын
11:09 ты что творишь, диверсант Хренов 🤦
@user-lv8kd9fn7w2 жыл бұрын
Карбидом опрессовывают😳
@Jivi_vecno2 жыл бұрын
Немцам есть чему получится. А то возомнили себя … 😊
@user-lv8kd9fn7w2 жыл бұрын
@@Jivi_vecno я их уважаю. Умные они
@terbangkemana_manachanel56772 жыл бұрын
Bagus
@user-mt5oj1qg3q2 жыл бұрын
Я так понял кинули карбид?!!!
@lucasfilho19722 жыл бұрын
Oque vcs mistura na água pra cria pressão dentro do cabeçote?
@user-ud6tn6zr9j2 жыл бұрын
Карбид
@user-kp3km6kv3k2 жыл бұрын
Прогресу их не победить
@freitaucher82252 жыл бұрын
I don't see any action against the cracks
@codreanujula58712 жыл бұрын
OAMENI CU MÎINI DE AUR 👍
@drlegendre2 жыл бұрын
Why are they doing a valve job on a head that has multiple cracks?
@crperformancetucker50652 жыл бұрын
Its not cracked just bad injector cups. They are replaceable
@Ricky-mouser2 жыл бұрын
@@crperformancetucker5065 I thought the injectors were to be installed and torqued down on a pressure test
@crperformancetucker50652 жыл бұрын
@@Ricky-mouser not always
@marianbalaz91952 жыл бұрын
Vsetka robota na zemi v piesku oni ani nevedia pracovat na nohach na cistych stoloch je to des🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰
@hubertrobinson88252 жыл бұрын
That little boy has a bright future ahead I'm sure he won't be waiting on a welfare check when he's 21yrs old nor killing and robbing if that was in the U.S. cps would call that child abuse but other countries knows the values of teaching kids to work I admire these people reminds me of my childhood days
@PakistaniTrucker2 жыл бұрын
Thanks for your comments ❤️
@georgegonzalez24762 жыл бұрын
Ah, no, he should be in school, instead of getting poisoned. Also it's odd that they are pressure testing with costly carbide, when one can hear an air compressor in the background that would do pressure testing for like free and without chemicals.
@nealbeard12 жыл бұрын
That little boy should be learning in school. That is how people improve their conditions.
@hubertrobinson88252 жыл бұрын
@@nealbeard1 I agree but sometimes what you learn outside of school help to build your future I grew up on a farm I had constant work to do I went on to college too now I'm a welder something I learned before college and it paid my way through school
@deconteesawyer57582 жыл бұрын
@@georgegonzalez2476 What is this "carbide" you speak of ?
@jackrabbit73892 жыл бұрын
Poor folks got poor ways but hey it works.
@FabiHtc2 жыл бұрын
I think you are the hardest working people on the planet✅👍🧑🔧🧑🔧
@PakistaniTrucker2 жыл бұрын
Thank you so much ❤️
@hamidr.97122 жыл бұрын
ان العمل عبادة. الله يكون في عونكم. احترمكم كثيرا من المغرب 🇲🇦
@30bmw882 жыл бұрын
Это карбит ?
@georgegonzalez24762 жыл бұрын
A 220 volt, ungrounded, un-GFI'ed, not double-insulated, metal cased drill!! Used on a dirt floor!! Thrilling!!!!! Someone should inform them that random wire-brushing of valve seats just makes them look prettier but doesn't help them seal much. Also one wonders why they don't make a "hot tank", it's just a tray with an electric heating element and some cheap lye.
@samuelpantoja90132 жыл бұрын
Alaa es pequeño yashua es grande
@user-qc1ou6lj9g2 жыл бұрын
малі діти працюють , а наші за юбку держаться.
@spiKey0svetlana2 жыл бұрын
Am I the only one wondering about how he doesn't number the valves. They just collect them in a bundle and of they go 😵
@AdamantineAxe2 жыл бұрын
Returning worn-in parts to the original location is important for something like a rocker arm that's been rubbed by a certain cam lobe and wear-matched steel-on-steel. There's no-such concern for the end of the valve that's almost entirely only pushed on. The shaft is as far as engines go is 'loosely' bushed by the valve guide - no wear-matching, and the valve sealing surfaces are all lapped and inspected for contact.
@tesodjukic43772 жыл бұрын
4valve per cyl.its strange to se
@freitaucher82252 жыл бұрын
waste oil is poisonous, good on children's hands
@Jivi_vecno2 жыл бұрын
Немцы отдыхают. 🤦♂️
@user-zw4hm5jl1z2 жыл бұрын
Это Подмосковье.
@user-jj9en2qb4x2 жыл бұрын
Эти люди как-будто после мировой катостроффы, пользуются остатками цивилизации!
@Traktorok_mini2 жыл бұрын
Зато если будет катастрофа им похер все будет,дальше то уже куда хуже...
@fainderskurs-koi87672 жыл бұрын
эти люди показывают тебе, что вслуч чего и вам свет отключат, в с голоду подохните. Ой, как прав тов. Лавров. Ой прав то как.
@user-pn6be2wp6q2 жыл бұрын
Дааа это 21век или 50 прошлого😞🤔
@ebat-kopat-tj2ef3ve2r2 жыл бұрын
работает ребёнок. как так ? в школе должен же быть.
@joeysanchez5926 Жыл бұрын
I use coca cola and drop in a few mentos right before in close it up.
@user-hv4hy3ff4d2 жыл бұрын
ну и рукожопы, клапана разсухарили и некоторые сухарики выпали на пол
@user-ku3tk4ru1z2 жыл бұрын
бедные дети--у моего смартфон из рук не вырвеш ь
@user-zn8qw8nb9t2 жыл бұрын
ребенок лысый, жестьяки)
@dimon10russ2 жыл бұрын
они карбида наложили?
@user-lv8kd9fn7w2 жыл бұрын
Скорее
@northwind3932 жыл бұрын
Зачем камни в гбц?
@KN_KaMAZ.2 жыл бұрын
Карбид закинули?
@user-kg6ks7tp1f2 жыл бұрын
Нужно было спичку поднести
@U.F.O.Technology2 жыл бұрын
До Пасхи далеко ещё.
@user-ft1zk8tc7v2 жыл бұрын
لماذا دائمن بلتعليقات اشاهد من يحاول ان يصور انه في امريكيا تطور احسن وان في معامله لاصحاب المهن احسن من عند المسلمين وان امريكا راعية الانسانيه وتحافظ علئ قواعد السلامه احنه بلعراق مو شفناهم قمة الوحشيه ولا انسانيه كله كذب حبهم لنهب وسرقة الثروات اكثر شي
@patrickconfer35922 жыл бұрын
The problem in the US and Europe is electronics on cars. Gas milage has replaced reliability, durability and ease of service. Those massive tool boxes contain more diagnostic crap than actual tools. Sad state when you have technicians instead of mechanics. Go to a machine shop, that’s still pretty cool.
@PakistaniTrucker2 жыл бұрын
Right thanks for your comments ❤️
@agt1552 жыл бұрын
Yes but modern cars are so much better because of electronics.
@motorchik.ua-remont2 жыл бұрын
Шо за камішки кидають в голову шо создать давление?
@tamar52612 жыл бұрын
I don't understand what they are doing, but it looks awesome whatever it is 😊
@PakistaniTrucker2 жыл бұрын
Thanks 😊❤️
@zamwiwi57022 жыл бұрын
Look at that kid, he will be master at 25, experience is better than college
@ragabsaleh2 жыл бұрын
Why do children work? hard work for kids
@PakistaniTrucker2 жыл бұрын
Right, their parents send them. Or they do it by their own will. They belong from very poor families to support their family they start learning & working at age of 12 or 15. Also they get very little pay like $3 or $5. But they don't beg & prefer to work.
@thepubliceye2 жыл бұрын
It makes me wonder why this country is so poor. That little kid is likely an orphan just works for table scraps.
@user-cb5ug4hc8n2 жыл бұрын
А какжэ трещины ?????
@cravtech68072 жыл бұрын
Это не трещина, стаканы дули. Он их потом развальцевал
@antonemilit21782 жыл бұрын
Watching this made me feel silly for wasting me time with things like torque wrenches and plastic gasket scrapers.
@user-wl5yq8cg4m2 жыл бұрын
ПАКИСТАН переводиться как чистая страна *-+++
@bribglbiggles79252 жыл бұрын
Highest I.Q. amongst this lot = 25
@Nali27722 жыл бұрын
Still allot More than Biden 🥴
@gerhardusdejager25162 жыл бұрын
This child labour is unacceptable!!! 😡😡😡😡😡😡😡
@schraubschrauber98462 жыл бұрын
Minute 7:42 the man in blue on the left! It couldn't be better.
@user-wl5yq8cg4m2 жыл бұрын
их надо в свалку в ГЕРМАНИИ устроит /*-+++
@yanowski56452 жыл бұрын
old school heads were the best .. modern day shite is not worth messing on with ... this is recycling at its best ... modern day just throw it away ,,
@user-ux1ut2tg7g2 жыл бұрын
Халтура . Клапана и втулки старые .
@murziks12 жыл бұрын
- какие старые ? им еще 50 лет не стукнуло !поработают еще !
@jimmywilson43222 жыл бұрын
Havent these peaple herd of a bench its all scratching on the floor seeing this i dont think I would be using thete services And why are they dressed in rags
@chlimchlim25992 жыл бұрын
Quand j'ai entendu (Allah akbar) à la fin du film j ai eu de la pitié pour ces pauvres gens.