Cherry Burl Hollow Form - 4 Ways Collaboration

No video

Cherry Burl Hollow Form - 4 Ways Collaboration

Рет қаралды 4,060

Күн бұрын

I demonstrate turning a small hollow form of cherry burl. “If it won’t hold soup, it is art!”
Watch the other "4 Ways" collaboration member versions of a small hollow form project by clicking on the links below:
Richard Raffan • Richard Raffan turns &...
Sam Angelo • Small Hollow Form----F... Richard Raffan
Tomislav Tomisec • Enclosed form _____4Wa...
If you find my videos helpful, you can buy me a virtual cup of coffee with this link. www.buymeacoff...
As an Amazon Associate I also earn from qualifying purchases from my Amazon shop www.amazon.com....
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacew...

Пікірлер: 41

@RichardRaffanwoodturning Жыл бұрын

Great to see two approaches to not disimilar bark intrusions: you go through where as Sam doesn't. Just what we hope for in a 4-Ways project.

@oltoddilocks Жыл бұрын

That new powermatic is dreamy!

@MikePeaceWoodturning Жыл бұрын

Best midi I have ever turned on for sure.

@kengunnell6398 Жыл бұрын

Love how you showed off the imperfections and use and note them at the beginning

@MikePeaceWoodturning Жыл бұрын

Thanks. A fun turn that turned out even better than I hoped for.

@oldgeezer1746 Жыл бұрын

Cherry is a great wood.

@garthkeck2003 Жыл бұрын

😂Another beauty. Well done

@jackthompson5092 Жыл бұрын

Beautiful hollow form Mike.

@MikePeaceWoodturning Жыл бұрын

Thanks 👍

@johnnyb95678 Жыл бұрын

Great approach and it turned out beautifully.

@MikePeaceWoodturning Жыл бұрын

Thank you very much!

@josephpotterf9459 Жыл бұрын

Thanks Mike

@jeanlong4285 Жыл бұрын

Beautiful vase

@MikePeaceWoodturning Жыл бұрын

Thank you so much 😊

@tomislavtomasicwoodturning Жыл бұрын

Great job Mike, love the see through inside feature on the wall of form

@MikePeaceWoodturning Жыл бұрын

Thank you. I was very pleased how it turned out.

@georgekabacinski Жыл бұрын

Very nice, Mike.

@MikePeaceWoodturning Жыл бұрын

Thanks, George.

@gregwilsonnaturephotography Жыл бұрын

Beautiful Mike, when I become a better turner,I am going to give this a go. Greg

@MikePeaceWoodturning Жыл бұрын

Best of luck!

@glencrandall7051 Жыл бұрын

Very nice piece of work Mike. Classic shape. Love the bark inclusion. Thank you for sharing. Have a great day and stay safe.🙂🙂 Now on to the other three.

@MikePeaceWoodturning Жыл бұрын

Thanks 👍

@randywood4782 Жыл бұрын

Good job Mike 😊I like Thanks

@MikePeaceWoodturning Жыл бұрын

Glad you enjoyed it

@gregdownunderinOz Жыл бұрын

Great job Mike, always enjoy your videos, very instructional and you always show great tool technique and control. Thanks for sharing. Can you do a 4 ways using a piece of square plank timber about 30 mm thick. Can be cut and glued no segmented bowls, turned objects only with emphasis on using as much of the timber as possible and only from that one piece of timber. Creative designs. Finish of your choice. This was similar to a recent club challenge we had.

@MikePeaceWoodturning Жыл бұрын

Thanks 👍 I can bring up to the group.

@MarklTucson Жыл бұрын

Very nice piece. That burl has some very nice figure. Really enjoyed watching your approach to this month's 4-ways project. Now off to watch the other three.

@ivanbukh7576 Жыл бұрын

Красивая вазочка! Хорошо , что оставлены следы короеда, они дают целостность картины!

@curtisalliston8958 Жыл бұрын

Thanks!

@MikePeaceWoodturning Жыл бұрын

Thank you very much, Curtis!

@lutzvogt6362 Жыл бұрын

Very beautiful piece Mike, however sometimes handling was tricky but the result is amazing 👍

@MikePeaceWoodturning Жыл бұрын

Yes, thanks

@pjseiber2774 Жыл бұрын

Beautiful piece and great talent ❤

@MikePeaceWoodturning Жыл бұрын

Thank you so much 😀

@kenvasko2285 Жыл бұрын

I think your design really compliments the beautiful wood. Gorgeous piece. I love working with black knot but it can be challenging. Love the included bark feature. Nice!

@MikePeaceWoodturning Жыл бұрын

Thanks, Ken. I think this is now my favorite hollow form.

@kenvasko2285 Жыл бұрын

@@MikePeaceWoodturning I can see why it is your favorite. It checks all the boxes. You should be proud!

@valeriehenschel1590 Жыл бұрын

Love the choice of wood for adding interest to the final item. Do you ever incorporate the tenon as a stylish foot rather than cut it off?

@MikePeaceWoodturning Жыл бұрын

Yes. Incorporate so it does not look like a tenon.

@jorisdemoel3821 Жыл бұрын

That is a very nice hollow form indeed. It remains very interesting to see how the four of you create such different things from the same general idea. Do you have any safety/handling tips on not getting your tool caught in all the gaps and hollows? Did you have a reason (other than aesthetic, it looks awesome) to go with a hole rather than retaining the bark? Thanks for another wonderful video!

@MikePeaceWoodturning Жыл бұрын

In this case it was esthetics. I saw the possibility and went for it. If you are turning at an appropriate speed and using a sharp tool reiding the bevel, cutting air is not a problem.