Solid comment

So basically it’s almost same diameter and about 1 finger length longer than the Baton 3

@@Dingdongwitchisdead 👍🏼, thanks!

Good to hear!

Me too

Right! And what people fail to understand is this. Nobody needs 1200+ lumens to walk to do every day tasks. There's people who want to blind people. Get an sft40 with at least 18650/350 battery. Nothing less. If convoy had momentary, and different tailswitches you can buy like weltool either protruding or flat so you can tail stand. I wouldn't buy anything else. They have absolutely every anyone needs. Tons of emitters and hosts. And so many modes in 12 different groups. Plus memory on/off. If you don't have a convoy I would highly recommend one.

Exactly what I was thinking!

Yeah I really wished it had half turbo on the Warrior mini. I just picked one up and am kind of regretting it. I don't need the full 1700 lumens especially since it can only run that for like a minute ugh. Tempted to get the Warrior Nano

Awesome, thank you!

I’m an industrial mechanic and carry the tools I need with me in my pocket. Something this small and bright is a huge preference. It takes up less pocket space so I can throw more tools in the same pocket.

I totally agree!

I’ll do it tomorrow night hopefully.

Just like the WM3, when set to full turbo, half press is medium (60 lm)

For what it’s worth, it’s a myth that blue light scatter more in fog than warm light. This is mainly due to the misconception that fog works the way Raleigh scattering does. Source: info.midstreamlighting.com/blog/yellow-light-vs-white-light-in-fog

I prefer warm and neutral myself, but cool is fine too.

@@cheule Thanks for the correction and information! It's always good to learn something! Maybe it is only a subjective perception but to me it looks like cool white lights have a bigger blinding effect in fog. Obviously I don't know what's the reason then. Maybe my perception is biased by this idea of "neutral is better"? I don't know. In the linked article car manufacturers are mentioned. They don't use yellow or warm head lights but on the other hand it looks like they stay away from something like 7000k+ (very cool). To me it looks like they are more in the area of 4500k to 6000k (neutral or slightly cool). Only aftermarket led car headlights look very cold white. This might only be individual perception. I don't have data. :-) But if this is correct I'm interested in the reasons for that. :-)

I get that, the tail switch UI on warrior is really nice. I lean that way.

@cheule coming soon to a theater near you. Warrior Nano pro. With UV , another cool colorway and 300 more lumens!

This is good info

You do. The functionality is in the head.

@@cheule Thanks, appreciate the reply 👍

I could possibly, but know the SFT40 3000K are very hard to get right now. I only was able to buy 7 total.

Last sale, they added it to your cart if you had purchased a WM3. Hopefully they do this again.

💯

Me too and most of them are defective lol

Ditto

They are So NoN reliable .. the flashlights are .. but chargers neeeeeeeeed a huge quality control upgrade ..

Came to get it off the dang strobe

Sublumen is all about not waking the wife for a bathroom trip.

@@cheule Yep I need sub lumen if I value my life not for longer runtimes for a longer lifetime!

I rather have no charge port than a type c with a rubber flapper on a light that's not cheap or a really nice wireless charger like everything else these days. On cheaper lights a type c is fine but on a more upscale models I want my light sealed no extra flaps or whatever. Honestly olights charging system is awesome if you don't like it the batteries charge in a slot charger just like any other.

@@cheule Really! Is that it? Then it should be called Sub marriage mode or dicky bladder infection mode etc but oh no, it's a fancy sub lumen. Just knock the wife out with a crenulated bezel, an Olight crenulated bezel. Ok just joshing of course but I can't get much excited about a light mode that attempt to have no light. Or how about getting some night vision goggles for all those night bathroom adventures lol.

@@t5king850r Yes definitely a niche system for those who prefer it such as yourself. I'm quite happy with usb-c as I don't find it a major chore in any way and I don't need any special niche cable or batteries. Each to their own and always good to have choice but why don't Olight just make a normal non-niche light and see how that goes. Works pretty well with the i3e and t models but as soon as you get to the i5r they start messing about with 2.4v batteries that are completely pointless! Nuttso. Anyhow, good luck to all who love their Olights.

That’s because of SFT40 vs P9. But the baton lacks the great tail switch. Also I’m likely going to swap the Warrior Nano today, which is much harder on baton line with its pressed bezel.

It does

@@cheule That's awesome I'm definitely getting a black nano so I can have a short wm3..

Yes, I noted that in my review. It’s not faulty, it’s by design (for safety).

Oh damn yeah I think I found it at 4:35 a bit unlcear but ok I guess ur wright it is a bummer though

Already done! Will release video Monday, with the lumen/CCT/beam changes

@@cheule You're a beast lol I knew you wouldn't keep the osram for long thats awesome!

Guilty as charged :)

I’m sorry, I cannot take the tail out of the equation. It’s what *makes* the Warrior line. Take this for example: I can set the light to ML (which is memorized). Then at any time, I have direct access to ML, 60lm, or 1200lm. This is because the tail is a two stage button. After the inclusion of the Nano, I’d never look at Baton again.

@@cheule fair enough.. that is cool.. ok so beam pattern between those 3.. which do you prefer and why? Is there a sig diff? If u don't mind me asking

@@bradleymckinney83no

Just like the WM3, when set to full turbo, half press is medium (60 lm)

Thanks mate. @@cheule

It remembers the setting. It only comes in CW at launch. Might change later. I posted a video of swapping the emitter to WW with a 519A.

@@cheule thank you! And thanks to your channel i got some olights and tried the brand and gotta say i love how it looks, feel and the ease of use of the UI, now because of your channel i got a arkfeld UV, arkfeld pro, and now upcoming warrior nano

Last sale, they were automatically added to the store cart for anyone that had bought a Warrior mini. I hope they do the same this time.

No, half turbo is a brand new Nano only feature.

They’re very similar beams. I would go Baton 4 kit if you’re going to run it stock. If you were going to do an emitter swap, then the nano is interesting.

They’re very similar beams. I would go Baton 4 kit if you’re going to run it stock. If you were going to do an emitter swap, then the nano is interesting.

Slightly greener, about +40 on my sample. I’m going to swap the light and release a video showing the lumen decrease and beam shape change for those considering it.

@cheule bought the baton 3 pro max CW and WW based off your duv not showing green and love it. Love your videos for showing this part.

A majority of American customs are based on the 18350. And I think for good reason. This nano is very lightweight and diminutive. I’d be surprised if you felt it was “too big.”

I don’t know, as I don’t have one to test. Let me know if you find out.

@@cheule if you do find out please lets us know that would make me buy a few...

Honestly, with the release of the nano, I wouldn’t ever look at the baton again.

They should be available at olight’s store.

@@cheule ya for some reason I can't find them.

Did you see my recent swap video? Solves those issues imo

I wish they had sent me the zombie one! I’ve never been so bummed.

That's annoying and I just ordered one without ordering the clip .

It is an SFT70. I misspoke a few times in the video. My apologies. The Warrior 3S is perfect for XHP50.3 swaps!

I don’t cover that because it’s on the website. Check here under technical specs: www.olightstore.com/s/0T4H7W

I cover it in the review, proprietary 18350.

Actually quite the contrary. I sat with the engineers from Olight and pled with them to switch to Nichia 519a for some of their lights. They said they couldn’t because the bulk of their customers wanted the lumens over tint and CRI. I believe them too, because when Jackson Lee of jlhawaii808.com sells Hank Wang D4V2s, he says the CW max lumen emitters outsell the warmer high CRI ones by 3:1.