Рет қаралды 41,677
Step-by-step guide on how to replace / remove / change car battery on Chevy Equinox SUV. You will have to replace the battery if your Equinox is not starting at all or during cold mornings. That means the battery is at the end of its life and is not holding charge anymore. ( 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | LS | LT | LTZ ).
Battery on Chevy Equinox is located under the front hood, just under the PCM. To start first you will have to slide black PCM cover off of the PCM. Then remove one 10mm bolt holding the PCM in place. Remove PCM, you don't have to disconnect it. Next thing to remove is the battery holder. To do that you have to remove plastic cover between the battery and the headlight. It is held by three plastic trim screws. Remove the screws and lift up the cover. Now you have access to one of the battery holder's mounting screws. Remove it, it is 10mm. Remove 10mm nut from the battery holder as well. Remove the holder and finally you have access to the battery.
Always first disconnect negative battery terminal when removing the battery. When installing new battery make sure to first connect positive battery terminal, to avoid any kind of shorts. You will again need 10mm wrench key or a ratchet with 10mm socket. That's it. Good luck.
If you live in a climate with really cold winters consider installing a battery with higher CCA (cold cranking amps) rating, but always follow vehicle recommended battery strength and size ratings.
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.