Chevrolet Spark 2018 STEREO UPGRADE FULL 3D PRINT INSTALL ADSP6 + AE650C + STEG SQ650 + STEG SQS12

Рет қаралды 24,084

6 жыл бұрын

Chevrolet Spark 2018 STEREO UPGRADE FULL 3D PRINT INSTALL AUDIOSYSTEM ADSP6 + AE650C + STEG SQ650 + STEG SQS12 #FredNsound
want it ?.
fred.n.sound@gmail.com
SUBSCRIBE FOR MORE VIDEOS......
FULL 3D PRINT INSTALL:
FRONT SPEAKER SPACER
REAR SPEAKER ADAPTER
TWEETER PODS
DSP REMOTE CONTROL BASE
DSP/AMPLIFIERS:
AUDIOSYSTEM ITALY ADSP6 (8CH DSP 6CH AMP, ALL IN ONE)
DLS CC1000 MONO
FRONT STAGE:
AUDIOSYSTEM AE650C 2 WAY ACTIVE
REAR FILL:
STEG SQ650
SUB:
STEG SQS12 AUDIOPHILE
FULL WIRING/CABLE OFC
want it ?.
fred.n.sound@gmail.com
Hit the 🔔 to join the notification squad!
SUBSCRIBE FOR MORE VIDEOS......
OUR SOUND TEST/MUSIC:
THE WILD SEA by Fred & Sound Official Mix
• #STEREO THE WILD SEA b...
High-End Radio - by Fred & Sound (Original Mix)
• High End Radio - by Fr...
"FRED & SOUND Official MIX"
• VEVO 2016 FRED & SOUND...
Fred & Sound - Jungle In Space (Original MIX) SOUND TUNE TEST TRACK
• Jungle In Space by Fre...
Bass Test-Bass Protector (Original Mix) by Fred & Sound (INT)
• Bass Test- Bass Protec...
Time Reflection by Fred And Sound - (Original Mix)
• Fred And Sound - Time ...
WHAT WE DO?
1. The First Channel on KZfaq For Pure Audiophile Car Audio
2. Real High-End Car Audio-Audiophile World Wide Research
3. Bring Out The Truth, And Best Deals Ever.
4. High/Mid End Car Audio Compares:
(Subwoofer-Midbass-Midrange-Tweeter-Amplifier-Dsp-Wiring)
5. Head Unit Test/Review
6. Amplifier Dyno
7. Each car audio Gear Gets Full Review Include 4K Videos/Photos From all Angles
8. Amplifier Guts
9. DIY Subwoofer Enclosure
10. DIY Speaker Build
11. We Produce Our Own Music Especially Design For Sound Tuning/Setup

Пікірлер: 87

@Trapperjohn1000 4 жыл бұрын

I love your channel. Thanks for the content Fred. You make me want to get a full STEG system

@frednsound 4 жыл бұрын

Trapperjohn1000 hi mate, thanks for the great support.. glad to hear that:)

@mesikadavid4614 6 жыл бұрын

Fred you are the best, i love your project on all car❤

@ArielSilasMusic 6 жыл бұрын

The civic FD project was the best! kzfaq.info/get/bejne/btqpoZCj1t-bf3k.html

@mesikadavid4614 6 жыл бұрын

Ariel Silas yes i know

@frednsound 6 жыл бұрын

mesika David thanks for your support,

@carabout6772 6 жыл бұрын

the civic build is so amazing 😉

@frednsound 6 жыл бұрын

Car About 😉, thanks for our support,

@ArielSilasMusic 6 жыл бұрын

This is absolutely amazing!

@frednsound 6 жыл бұрын

Thanks,

@OrelSilas 5 жыл бұрын

Your best work yet. Way better than the Honda

@frednsound 5 жыл бұрын

Thanks,

@baragoakamuvan8754 5 жыл бұрын

Honda project is the best! kzfaq.info/get/bejne/btqpoZCj1t-bf3k.html

@frednsound 5 жыл бұрын

Baragoa Kamuvan thanks

@rubensdomm9373 6 жыл бұрын

Hello Friend! Congratulations for your work, it is really a privilege to see your works in small cars, greetings from Mexico.

@frednsound 6 жыл бұрын

Rubens Domm hi my friend, thanks for your great support as always :).. thanks

@carabout6772 6 жыл бұрын

Keep it up. Support from denmark.

@frednsound 6 жыл бұрын

Car About thanks for your support, appreciated,

@baragoakamuvan8754 6 жыл бұрын

Wow.. also a 3D parts build? You on the top.

@frednsound 6 жыл бұрын

Baragoa Kamuvan thanks,

@royaltwins6717 6 жыл бұрын

Coolest building

@frednsound 6 жыл бұрын

Royal Twins thank:)

@misaelgarcia6735 6 жыл бұрын

Nice and clean

@frednsound 6 жыл бұрын

Misael Garcia thank you,

@eduardobatista329 3 жыл бұрын

I bought three of the mmatts amplifiers two of them are the hifi 6150, and one is the md 4100, I have every speaker from cdtaudio es line and hd , it will be a three way up front , with two center channel, the rear is a two way and only one 12 subwoofer, also in the front seats I'm thinking to install bass shakers just for fun when I watch movies, this will be a system for movies and music, 5.1, but I'll do different presets according the situation, if I have passengers, or if I want just a front set up for music with sub doing the sub bass, this has been an inspiration since you guys started and did your audi with 5.1, that was awesome,

@frednsound 3 жыл бұрын

Hi mate, that’s great, thanks for sharing and enjoy your system:)

@kutaybamusic4877 6 жыл бұрын

Hey fred, Do you think the AudioSystem Italy AE component , is better than the Steg SG 650c?

@royaltwins6717 6 жыл бұрын

Kutayba Music i think the sg , what is the price range of both?

@frednsound 6 жыл бұрын

Kutayba Music at the same level .. ,thanks

@brandonrieffel6306 5 жыл бұрын

Fred & Sound do you sell the door insets I have a 2019 and looking to add rear components and update the front

@eduardobatista329 3 жыл бұрын

Have you heard of the mmatts6150, here in the usa competition, they have won many awards when they started in 1995, people compare them to the zapco lx and ap in sq, but the zapco is smoother, the mmatts sound a little clinical, but to me I think they are good, they are rxpensive.

@TheFiendRacer 6 жыл бұрын

Very cool, amazing stuff. Are you a shop or something ?

@frednsound 6 жыл бұрын

TheFiendRacer hi, yes, thanks for your support,

@ganganamet2141 5 жыл бұрын

nice, there is more stereo upgrades on this channel?

@frednsound 5 жыл бұрын

Gangana Met hi, yes have many more.. check our videos in our channel ,thanks

@ganganamet2141 5 жыл бұрын

kzfaq.info/get/bejne/btqpoZCj1t-bf3k.html This and the Kia Forte are perfect!

@nacorpiccardo8743 3 жыл бұрын

Amazing Job , I have a car like this , how can I connect an amplifier if I don’t have rca output? Also , do I need those spacers to upgrade the speakers ? Thank you

@frednsound 3 жыл бұрын

Hi mate, thanks for the support, yes you need adapters, you will need quality DSP, and you will be using your hi-level outputs from your stock headunit, to the dsp hi-level input, then the DSP will produce the Rca’s out, thanks for watching

@cptnzigouille6834 5 жыл бұрын

how did u get a wire to the door with the connectors in the way im trying to figure it out

@frednsound 5 жыл бұрын

Samuel Rose hi, Through the car connector direct to the door, thanks

@danvol8719 2 жыл бұрын

Hello Fred... A question but if I asked you about the supports for the tweeters of the kit 2 ways steg MLG65C what price would you make me

@frednsound 2 жыл бұрын

Hi mate, we don’t make them at this point, maybe later. thanks for watching

@eduardobatista329 3 жыл бұрын

Hey is it ok to use almost any rca as long as they are of good name, like stinger, 4000,5000, 8000, or even not expensive rockford fostgate, what is a good price rca 6 channel, and maybe , also 6 channels from dsp to amp , could be 2 feet or 3 feet, I want a clean look, might use tech flex ,ferrels and heat shrink,

@frednsound 3 жыл бұрын

Hi mate, the AudioSystem Italy ADd1 are great for DSP setup, pure OFC, but yeah, also stinger will do great, thanks

@theradioison 3 жыл бұрын

Great work! Do you sell just the tweeter and front door printed mounts?

@frednsound 3 жыл бұрын

Hi, thanks.. currently they are unavailable, will post ones they are ready, thanks for watching

@polimind Жыл бұрын

Hi Fred: Could you please explain if there is any difference, in terms of sound, between Steg ME12 and Audio System AE12? The specifications are identical. Thanks

@frednsound Жыл бұрын

Hi mate, they perform the same, personally, I think the AE looks better and cleaner. Thanks for watching

@polimind Жыл бұрын

@@frednsound Thank you for the fast answer, as always. Ok, so I'll choose the AE. By the way, I bought the SG650C...finally! :)) thanks for all your tips.

@frednsound Жыл бұрын

@@polimind welcome mate🥂🎶

@poopik3151 3 жыл бұрын

did you manage to cancel the built in dsp on the mylink ? in the dev mod the dsp wont go off

@frednsound 3 жыл бұрын

Hi, on this unit oem was without DSP, Thanks for watching

@jorgemontesdeoca895 2 жыл бұрын

do u have the wiring diagram of the stereo where u connected the rca outputs

@frednsound 2 жыл бұрын

Hi, no, used the hi-level outputs to the dsp-amplifier, thanks for watching

@Xdst813 Жыл бұрын

I wonder how much this would cost for my 17 Spark

@nivbarashi 5 жыл бұрын

Where did you connected the blue remote cable?

@frednsound 5 жыл бұрын

Hi, this dsp amp have auto sense turn on, no remote input is needed when you connect to oem, this unit provides remote out to power external amplifier, thanks

@coreyrosewestbrook7353 5 жыл бұрын

@frednsound 5 жыл бұрын

Siy West 😉

@abvegetamexcollector4266 3 жыл бұрын

Excellent work bro, Friend I need 4 supports for the speaker of a door like this, but I need the file to print in 3d, you can pass me or sell me the file to print it please? I from México

@kevinsandoval1210 3 жыл бұрын

What size are the speakers you put in the door

@frednsound 3 жыл бұрын

Hi, 6.5’ front and rear, thanks for watching

@osirismunguiaaltamirano9225 5 жыл бұрын

Donde consiguieron esos controles de aire condicionado?

@frednsound 5 жыл бұрын

Osiris Munguia Altamirano hi, it’s oem comes from factory, thanks for watching

@balisticrocket1013 5 жыл бұрын

Full OFC Cable ??

@frednsound 5 жыл бұрын

Gangana Met hi, yes full ofc, thanks

@nivbarashi 5 жыл бұрын

Hey I also have a car like this I want to put together a subwoofer We have a connection system of rca?

@frednsound 5 жыл бұрын

Hi, no, the stock is hi input, no low outputs, to add subwoofer to your stock system you could use quality hi-low converter, or the best choice is high quality dsp processor, thanks for watching

@frednsound 5 жыл бұрын

You don’t have Rca out on your stock radio, you have hi-input, hi-input is your radio powering your stock speakers, you will use that wires to a quality hi-low converter or dsp, that will offer you Rca outputs for your amp, thanks

@nivbarashi 5 жыл бұрын

@@frednsound ty

@danielcaschetto 5 жыл бұрын

Is good the ADSP6 for soundquality/performance? I want to install in a bmw with STEG BM8, HERTZ EMV100.5+ HERTZ MP.25 Do you advice me other alternative ?

@frednsound 5 жыл бұрын

Daniel Caschetto hi, amazing sound quality and power outputs as well, thanks for watching

@MrJoshhannan 5 жыл бұрын

How many watts and did you need to upgrade the Alternator??

@frednsound 5 жыл бұрын

josh hannan hi, 1000rms at total, no need for alternator upgrade as the dsp have built in amplifier and it’s super efficient, the power cable should be no more then 8ga, the mono is digital as well, at overall it’s very stable and no need for big power input, and the results is unbelievable!, thanks for watching

@MrJoshhannan 5 жыл бұрын

So what's this highest amp to run a sub and wire should I use to not kill any thing

@frednsound 5 жыл бұрын

josh hannan hi, you could use 1000w no problem, use quality capacitor and class d amp, thanks

@MrJoshhannan 5 жыл бұрын

@@frednsound ok thanks you very much

@frednsound 5 жыл бұрын

josh hannan you’re most welcomed, thanks