Chevy Sonic BOV Install (Atmospheric Bypass Valve)
Рет қаралды 72,918
5 жыл бұрынA how-to for anyone interested in installing a "Blow off valve" aka. Atmospheric Bypass Valve on their 1.4L Chevy Sonic.
Forge Motorsports Valve purchased from Bad News Racing
store.badnewsracing.net/Forge-...
@nathanmiller1196 5 жыл бұрын
Do you use the old diaphragm to hold the new spring or did just put new spring with the valve in? Cause I’m having a hard time seeing what holds the spring center and in place without using the old diaphragm. Please get back to me.
@nathanmiller1196 5 жыл бұрын
Please get back to me ASAP.
@nathanmiller1196 5 жыл бұрын
Cause I have my car tuned and I don’t what to use. Do I use the new stiffer yellow spring that came with it or do I use the stock one and the diaphragm. Or do I just do not use a spring at all? Please get back to me
@nathanmiller1196 5 жыл бұрын
Because i tried using the stiffer spring and it’s almost not even possible to fit it in there. My common sense is telling me not to use a spring at all. Sorry for the spam I’m kinda time sensitive right now. So please reply
@DIYToona 5 жыл бұрын
Nathan Miller I didn’t change the spring that came in the new Forge housing. The factory spring was completely removed. That is of course for the atmospheric. I don’t know the configuration of the Forge recirculating. Does this help?
@nathanmiller1196 5 жыл бұрын
DIY Toona yes I just ended up not putting a spring in. It sounds great. I was gonna say it was almost impossible to put the new spring in cause how stiff it was. Thanks for getting back. And this was for the atmospheric.
@k_luea102 2 жыл бұрын
This is by far the most detailed insulation I've seen on KZfaq good job man 👍
@malachie666 4 жыл бұрын
That actually sounded clean. Great great explanation.
@davidarcher89 3 жыл бұрын
Dude by far the best DIY video I have ever seen
@DIYToona 3 жыл бұрын
I appreciate the kind words!
@hawkdsl 5 жыл бұрын
The music cracked me up... great vid... and thanks for the how to.
@Luke-hg3qc 5 жыл бұрын
Great video good explanation, been thinking of doing this to my car I live in England UK and have a vauxhall astra with the same 1.4turbo engine
@AOG_ETH 4 жыл бұрын
Did it work on your Cruze I have a 17
@BlueCollarBastard1987 2 жыл бұрын
Awesome!! Clear & precise video of the entire process. I'm about to do this to my 2016 Trax. Gonna get a valve from the same place. Sounded awesome. Thanks for the walk thru man.
@BlueCollarBastard1987 2 жыл бұрын
I lied there sold out. Damn. Any other links on a good place to buy a reliable valve that sounds as good as the one you installed?
@DIYToona 2 жыл бұрын
@@BlueCollarBastard1987 you can try the one from Cruze Culture. It’s the exacts same valve product code, but I’d email them and see if it will fit the 1.4t in the sonic. (It really should. Same engine and all…) www.cruzeculture.com/products/11-16-chevrolet-cruze-forge-motorsports-1-4t-atmospheric-bypass-valve
@BlueCollarBastard1987 2 жыл бұрын
Ok sweet thanks for the advice. I will do that. 👌
@seanmacdiesel 3 жыл бұрын
Thanks for the how-to. Informative and detailed.
@don_cruzen4079 5 жыл бұрын
Dude mine is on the way for my 1.4 cruze. Cant wait! Nice detailed how to video btw! Gonna come in handy for sure. Thanks!
@aLexGeNeSiS01 5 жыл бұрын
How much does it cost? :)
@AOG_ETH 4 жыл бұрын
Did this work on your Cruze I have a 17
@claytondorland2976 4 жыл бұрын
Whatsup don!!!!?
@johnw7602 3 жыл бұрын
Thankssssss, for a great video, well done! Side note: A small neodymium magnet inside the socket works wonders ;)
@DIYToona 3 жыл бұрын
John W you’re absolutely right. I have some of those small magnets now. Come in handy for a variety of applications.
@arnienelson6415 2 жыл бұрын
So does scraping some sockets against a magnet till it becomes magnetic.
@mikes.4811 Жыл бұрын
Great video! Thanks for this. I couldnt get the rubber hose part off the factory fitting and ended up ripping it, so had to buy a new one. 😔 🖖
@nicktravelstead515 2 жыл бұрын
Yes! The sound I’m looking for
@MadCarTK 2 жыл бұрын
Damn dude, that was super detailed
@DIYToona 2 жыл бұрын
Thanks mate
@menarenotwomen Жыл бұрын
Okay, I’m buying one now for sure
@Vector32XL 2 жыл бұрын
Very detailed video two thumbs up.
@xaviergarno5348 3 жыл бұрын
That’s sounds amazing!
@maximilianoruizrojas5051 5 жыл бұрын
Sube más videos, excelente trabajo amigo
@aLexGeNeSiS01 5 жыл бұрын
English pur favur
@tristanlewis1891 3 жыл бұрын
To access blow off valve easier take off the heat shield and waste gate actuator... Makes putting in atmosphere blow off valve a lot easier
@mikes.4811 Жыл бұрын
Dont know if the Cruze is the same, but I just put the Forge recirculating valve on my Cruze and it was a pain in the butt. LOL Your video helped, though. Thanks. 🖖
@judgemally5034 4 жыл бұрын
Dude Amazing video
@justintime2993 5 жыл бұрын
Thank you!!
@madmike6254 4 жыл бұрын
Very satisfying
@renostylz 2 жыл бұрын
Thank"ssssssssssss" for showing the video. Def Getting one For Lil Blue.
@DIYToona 2 жыл бұрын
That “ssssssss” is much louder and aggressive when there’s more psi under engine load.
@TheThirdWheel618 4 жыл бұрын
What is the lil hard-line that is on the valve ? I know it goes the the elec solinoid at one time someone told me to tie in my boost gauge to it so I did . It does work but how accurate it is I don't know .....so if I install this valve I'm just going to put it in no diaphragm or spring ? I have the trifecta turbo advantage tune but that's 90 percent transmission I'm only pushing 19/20psi ...
@ak5tudio 4 жыл бұрын
Something that you didn’t mentioned is that you will need a tune after install it. The recirculating valve doesn’t need a tune but the atmospheric does. If you don’t tune after install it the engine light will come on probably with the P0171 code
@straightsixracing 4 жыл бұрын
AK Studio really?
@sadabdullah5837 3 жыл бұрын
@@straightsixracing yes i got that every time i start it and remove it cause did not received the tune yet.
@iteesea Жыл бұрын
I got a p1101 code after install
@andysalgado4673 Жыл бұрын
Do I need the springs for the recirculating bypass valve or just insert it back into the valve
@ignaciomardini5734 3 жыл бұрын
HelIo, need to do a question. Did you feel that your car is slower or has any performance reduce? Im about to install this valve to my Opel Corsa 1.4 turbo (same engine as Sonic Turbo) with stage 1 tune. Thanks and great video too :)
@DIYToona 3 жыл бұрын
No I honestly couldn’t feel a difference in overall power.
@oswaldoviveros5273 4 жыл бұрын
can you please do a video on how to remove the bumper fog lights?
@scottkenny6303 4 жыл бұрын
Yo man new to the channel quick question where did you find the body kit that's off the charts!!
@DIYToona 4 жыл бұрын
Irish Kenny That’s no body kit. I widened the lower grill opening with a saw and fabricated a custom grill to fit.
@scottkenny6303 4 жыл бұрын
@@DIYToona damn that's a damn good job then lol props!
@XicanMe420 5 жыл бұрын
Great build ! , Was wondering what kind of grill did you use I like the cut out and is that carbon fiber in between grills?
@DIYToona 5 жыл бұрын
XicanMe420 So that grill was something I custom fabricated after I took a reciprocating saw to the lower grill. Yes that is carbon fiber separating the upper and lower sections
@XicanMe420 5 жыл бұрын
@@DIYToona thanks for quick reply Maan that looks amazing , I wanna do something like that I got the 1.8 my model and just cut open all the grill cause they have those stupid filled in gaps lol
@yashpatel1431 5 жыл бұрын
Thank you for this really informative and helpful guide! Will the re-circulation blow off valve sound just as good? I'm not looking to tune.
@DIYToona 5 жыл бұрын
If you want to hear the recirculating bypass valve better, invest in an aftermarket intake that uses a hard tube and conical filter rather than the flex tube and filter box. This allows the sound of the air being vented back into the intake to be less muffles and heard through the filter.
@StreetLegalCars Жыл бұрын
@@DIYToona bro I have cold air intake and rest car is stock i hear woosh sound love it as its my very first best mod on cruze and was looking to make woosh sound louder. So the as you said intake I have it already can i install this recirculating valve to increase more sound of woosh let me know please cause my car is stock and don’t want to tune it
@DIYToona Жыл бұрын
@@StreetLegalCars Yes the recirculating valve will make the woosh sound you hear louder. You won’t lose any air, so a tune shouldn’t be needed.
@StreetLegalCars Жыл бұрын
@@DIYToona thanks mate which one should i buy forge or bnr or any other brand you know after this two
@DIYToona Жыл бұрын
@@StreetLegalCars I’d go with the Forge recirculating. They sell it on the BNR webpage.
@captainbuttnuggets4786 2 жыл бұрын
I find it funny that I don’t see any simple mods for a 2018 Malibu “other than a K&N filter kit which I did install and was kinda happy with “ im still not happy with the throttle response and I can’t bring my self to spend $300 on a throttle improver module I also did try a adjustable manual boost control but that did nothing but turn on my check engine light on 😳
@KyleKick909 5 жыл бұрын
wish they made one with an adjustable bov so you can open or close it.
@MikeLeeSr 2 жыл бұрын
Great video.? Do you need tuning software with this install.?
@DIYToona 2 жыл бұрын
Highly recommended but not 100% needed.
@roberthein2156 5 жыл бұрын
All your reply's, seem to focus on rev SOUND? Any engine improvement, in my book, is Performance! What's the benifets of installing this, just to have more engine noise?
@DIYToona 5 жыл бұрын
Robert Hein There is much debate as to if and how an atmospheric valve can improve performance. On a small displacement engine like the 1.4 there isn’t any performance gain. Some might argue it even suffers extra turbo lag because the air wasn’t recirculated back into the intake.
@gavinrommel98 Жыл бұрын
Hey i have a Chevy Cruze basically the same engine set up, if i install this valve does it require a tune? Seen forums saying so but in this video no tune was mentioned. Just curious let me know please!
@DIYToona Жыл бұрын
The tune is highly recommended, but other sonic owners (including myself) had no issues operating the vehicle without a tune. Read some of the other comments for more info.
@LongboardManiac 3 жыл бұрын
Just wondering, Can i install a blowoff valve and have a cold air intake? Or do i need the stock intake for this to work properly
@DIYToona 3 жыл бұрын
Noah Jacobs This BOV will work with both stock engine air intake and a cold air. I currently have an MPFab intake with the Amsoil conical filter on it and it works just fine.
@pricilianomorales5613 3 жыл бұрын
Were did you order bov?
@brandonmindemann2410 Жыл бұрын
Looking at getting this, did you need to tune at all? Did it throw any codes?
@DIYToona Жыл бұрын
Tune recommended, but not always required. If it throws codes, tune it. See some other comments for further discussion if curious.
@kingturk3918 3 жыл бұрын
Whats the measurments on the BYPASS VALVE
@jesseehargis 3 жыл бұрын
would this part fit on a 2015 chevy cruze as well? i know they are both a 1.4L but i dont know much about chevys so i dont know if they are the same engine and everything
@DIYToona 3 жыл бұрын
According to the documentation on the Forge valve and Chevy, YES, this will fit the 2015 Cruze with the 1.4L Turbo Ecotec LUJ/LUV engine.
@2PacMejia 7 ай бұрын
Friend, could you help me with the measurements of the part where the turbo fits, where it has the gaskets, the diameter, the height? I would appreciate it from the bottom of my heart
@bbacna1 2 жыл бұрын
A ball torx may be easier than a standard torx bit 👍🏼
@matty00866 Жыл бұрын
Does anyone know where to find a bov for the 2nd generation, 2017 and onwards 1.4l turbo models?
@lawrencecayetano776 5 жыл бұрын
I see you customized your front grille. . . anychance you have a video on how you did it?
@DIYToona 5 жыл бұрын
Lawrence Cayetano Unfortunately I don’t have any footage of that endeavor. It was purely experimental and took a lot of measurements and prototyping to get right.
@lawrencecayetano776 5 жыл бұрын
@@DIYToona looks good nonetheless.
@BigZeus 4 жыл бұрын
Any clue what size the screws are? I ended up stripping one out :(
@rockytop4 4 жыл бұрын
They look like a m6#1.50 ?
@MultiRayman98 Жыл бұрын
Will it work on a Buick Encore?
@lazyboy91113 2 жыл бұрын
🤩
@kevinawalt4550 2 жыл бұрын
Do you need an aftermarket tune for this to work without triggering the mil?
@jeremypaulearnest Жыл бұрын
Did anyone ever find this out?
@gerardoduenas5815 5 жыл бұрын
Hi... Which is better.... In order to have the pssss sound... I dont know if is better the bov or an air intake. Just for the sound what do you recomend. ? If i buy the bov. Is it necessary to modify the computer?
@DIYToona 5 жыл бұрын
Gerardo Duenas if you want the venting sound to be as loud as possible, get the atmospheric. If you don’t want to deal with the BOV Installation, a hard-tube intake with conical filter usually allows some rushing air noise from the factory recirculating valve to be heard.
@jesseehargis 3 жыл бұрын
i recommend both
@johnjerizlopezignacio3891 4 жыл бұрын
+DIY Tonna @DIY Toona what is the purpose of that? Sorry, i have a hard time googling it.😬
@georgiuzunov4006 2 жыл бұрын
Do you need an aftermarket tune for this to work without triggering the check engine light?
@DIYToona 2 жыл бұрын
I didn’t have a tune for several months and never got a check engine light. Some people have reported getting code P0171. Getting a tune will definitely alleviate the possibility of throwing a code.
@georgiuzunov4006 2 жыл бұрын
@@DIYToona thank you for the reply, I do appreciate it.
@RobZ_Z34 2 жыл бұрын
Can you install it on a Sonic LT 2013?
@user-qo9qe2wx5r Жыл бұрын
감사합니다
@joekaestner8635 5 жыл бұрын
What type of blow of valve did you acquire?
@DIYToona 5 жыл бұрын
Joe Kaestner The one installed is an atmospheric made by the company Forge
@austinbutts4373 3 жыл бұрын
Does my car need a tune for this to work on my stock Chevy Cruze 2013?
@sadabdullah5837 3 жыл бұрын
Austin butts you will need a tune or it might send a code for vacuum leak
@piwi565 5 жыл бұрын
Two questions... any hp gain? Did you change anything on the ecu?
@LittleToona 5 жыл бұрын
Luis Diego Ramírez Córdoba First answer, not without a tune. Second answer, I did get an ecu tune, but didn’t do it myself. I still need to hop on the dyno to see where I’m at now.
@piwi565 5 жыл бұрын
@@LittleToona great I'll keep checking... if you get any positive results on the dyno I'll order one
@jesseehargis 3 жыл бұрын
if anything you will lose power and have turbo lag because turbo pressure it released in the atmosphere instead of recirculating, sounds cool though
@SuperMegaGoofyGoober 4 жыл бұрын
Where are your aftermarket headlights from?
@DIYToona 4 жыл бұрын
Parker Vavrick Those were built by yours truly. I have some of the build process covered in other videos in my channel.
@RowdyEnt. 3 жыл бұрын
Why wasnt anything mentioned of needing a tune in the video?
@kilastrika 5 жыл бұрын
Spring and diaphragm are not needed afterwards?
@DIYToona 5 жыл бұрын
Jattle axe The short answer is ‘no’. I just pinned the in depth discussion fro two months ago. Please check that out.
@TheThirdWheel618 5 жыл бұрын
Thanks for the video you made it easy to understand and easy to see all steps , the forge BOV was not cheap was it ? Have you done the pcv mod ? The kit that bypasses the factory check valve in the intake I'd like to see a video on that one as well .
@DIYToona 5 жыл бұрын
Bamboozel96 Yes I have done the PCV mod. If you look carefully in some of the shots you can see the brake boost line connected to the T-fitting on the top of the manifold. Unfortunately I didn’t create a video for that task.
@TheThirdWheel618 5 жыл бұрын
@@DIYToona That's a missing link video lol ...I have the one that goes to the throttle body spacer although I have not done it yet would like to see a video ...
@DIYToona 5 жыл бұрын
Bamboozel96 I know. Believe me I wanted to make a vid for it, even shot some scenes. The task became too involved for a first-timer and I didnt want to make a video without knowing the best way to do the mod.
@TheThirdWheel618 5 жыл бұрын
@@DIYToona Well you made a good Sonic video there's a lack of them on you tube I might put one on soon I had a cold air before but prefer blow off valve for the sound etc
@TheThirdWheel618 5 жыл бұрын
I meant put on a blow off valve not video ...
@JasonStevenson72 2 жыл бұрын
Did you already have a Tune on your ECU, if not won't this new BOV cause a code on the ECU?
@DIYToona 2 жыл бұрын
I didn’t have a tune for several months and never got a check engine light. Some people have reported getting code P0171. Getting a tune will definitely alleviate the possibility of throwing a code.
@kaydencrooks2790 Жыл бұрын
Do you have a link for the BOV that you used?
@DIYToona Жыл бұрын
Link in description.
@fooku5o 5 жыл бұрын
Did you install the to atmospheric bov? And do you need to get your car retuned when you put this on?
@DIYToona 5 жыл бұрын
Dustin Bach Yes I installed the “to atmospheric” bov. A tune isn’t necessary with these engines. The boost and air volume isn’t enough to throw codes or cause overly rich F/A.
@MrLivefree91 5 жыл бұрын
@@DIYToona no codes or any? Awesome
@fooku5o 5 жыл бұрын
Have you tuned your engine at all?
@DIYToona 5 жыл бұрын
Dustin Bach I didn’t do it personally, but yes it is tuned now.
@psychoaikko Жыл бұрын
Does installing a new aftermarket BOV negatively impact the turbo or engine?
@whome8041 2 ай бұрын
no helps it run more efficient there for saving it in the long run. unless your tuning your car for max power
@eddietabares1558 5 жыл бұрын
Where can I buy this blow off valve I've been looking for it and I can't find it?
@DIYToona 5 жыл бұрын
Eddie Tabares store.badnewsracing.net/Forge-Motorsports-14T-Atmospheric-Bypass-Valve_p_102.html
@blue04mx53 3 жыл бұрын
Silly question but here it goes. What is the benefit of installing this valve on an otherwise unmodified engine? Apart from the hissss.
@Fallingangel313 2 жыл бұрын
Where did you put the bov spring at ? Or you didn’t?
@DIYToona 2 жыл бұрын
The spring that comes out with the factory diaphragm does not get reinstalled. There is a spring inside the Forge Valve.
@TheThirdWheel618 3 жыл бұрын
Did you ever have oily residue around the engine ? Someone told me that atmospheric blow oil out over time and it goes on your engine .
@DIYToona 3 жыл бұрын
RadDadGarage Since you asked I went out and checked. Looked all around the BOV area and below so see if there are any signs of oil residue. I honestly didn’t see (or feel) any. I’ve only have my BOV installed for 25 months (14,400 miles). Maybe something like that happens much later in its life.
@TheThirdWheel618 3 жыл бұрын
@@DIYToona I appreciate it thanks I asked cuz one guy had all these mods and had a forge recirculation valve I asked him why ? That's what he told me it blows oil all over ...so now I know it don't , if combined with a catch can even better
@sadabdullah5837 3 жыл бұрын
I just installed a Blow off valve and next day a check engine light came out as p0171. And i have it in straight pipe what could cause this?
@cjreyes666 2 жыл бұрын
You need a tune
@StayMurken28 4 жыл бұрын
I have a 2018 sonic rs would I be able to install a atmospheric bypass valve with no problems ?
@DIYToona 4 жыл бұрын
cindy jimenez Yes if your Sonic uses the 1.4L turbocharged LUV engine. The ECU on the 2018 *might* be more picky and give you an engine light. A tune from reputable sources (like BNR and Trifecta) is recommended not only to avoid an engine light, but also to give your sonic a little extra GO.
@Steven-te2me 5 жыл бұрын
What BOV are you using? Looking at doing mine but unsure as to what BOV to get
@DIYToona 5 жыл бұрын
Steven Switters This one is made by the brand Forge. They make both recirculating and atmospheric versions.
@gerardoduenas5815 5 жыл бұрын
@@DIYToona both of them make the sound?
@DIYToona 5 жыл бұрын
Gerardo Duenas The atmospheric has a louder sound. The recirculating will, but it will be slightly muffled, unless you have a hard intake tube.
@gerardoduenas5815 5 жыл бұрын
@@DIYToona thanks a lot. I will buy it... I have been looking for one.
@buba915 4 жыл бұрын
whats the part number for that? any part #
@nizo6673 8 ай бұрын
That spring you moved from the oem part, does the new by pass valve already come with a built it spring?
@DIYToona 8 ай бұрын
Yes it does. If you are buying new there will already be a spring inside the housing. It also comes with additional springs of varying stiffness you can swap out.
@nizo6673 8 ай бұрын
@@DIYToona did you have have swap out the spring?? Or just threw it on? I’m starting to modify my trax decent mods already 🤟🏽
@DIYToona 8 ай бұрын
@@nizo6673 I just threw it on with the default spring that’s pre-installed. The other ones are if you are pushing more boost I believe.
@nizo6673 8 ай бұрын
@@DIYToona I’m pushing max 22 psi
@DIYToona 8 ай бұрын
@@nizo6673 I can’t recall which color spring is rated for what PSI. You’d need to look at the Forge specs.
@spikes_johnson 3 жыл бұрын
Do you need a tune for this or does it work okay with the stock tune?
@DIYToona 3 жыл бұрын
NvrStpGaming There are some more detailed discussions on this in earlier comments. The short answer is no.
@spikes_johnson 3 жыл бұрын
@@DIYToona Thanks for responding. Looking through the comments its looks like I will need to tune it since I own a 2018 Sonic
@cripcov9517 4 ай бұрын
Ive got a trifecta tune an one of these bov waiting to be put on.. it wont trip any engine codes will it? Just want to be sure lol
@DIYToona 4 ай бұрын
If you tell Trifecta you’ll be installing the BOV they will make sure that’s part of the tune and it doesn’t throw codes.
@stangster87 3 жыл бұрын
Do you know if this application works for the Cruze?
@DIYToona 3 жыл бұрын
Yes it will work on the Cruze with the 1.4L turbo engine.
@MRHOTCAKE 5 жыл бұрын
Whats the difference between atmosferic and recirculating? i bought recirculating but maybe it doesnt will make the bov sound :S can you help me?
@DIYToona 5 жыл бұрын
MRHOTCAKE Atmospheric vents the “waste” air outside (into the engine bay area). Recirculating routes the air back into the intake just before the turbo. The atmospheric is louder.
@MRHOTCAKE 5 жыл бұрын
@@DIYToona thanks, I think I bought the wrong bypass valve I wanted the bov sound... Damn :( so the one I bought will no sound and be the same as stock one?
@nizo6673 5 ай бұрын
Hey man is this the same process for the trax??
@DIYToona 5 ай бұрын
I’m pretty sure it is the same process if you have the Trax with the 1.4L Turbo LUV designated engine.
@joshSummers14 Жыл бұрын
Hey where did you get your grill from?
@DIYToona Жыл бұрын
I built that myself. Laser cut acrylic and hand-laid carbon fiber.
@kamaleon20002000 3 жыл бұрын
Hi there... Do you know if this is the valve of a Focus ST mk2?
@DIYToona 3 жыл бұрын
Hi. Unfortunately this specific valve only works with the MK3. However, the same manufacturer does sell a kit for your MK2 here www.forgemotorsport.com/Blow_Off_Valve_and_Kit_for_Ford_Focus_RS_Mk2--product--1002.html
@kamaleon20002000 3 жыл бұрын
@@DIYToona Thank you. Im asking that cause i have a 2016 Sonic RS and i want to install your blow off valve, but here in my country they sell the same valve for Sonic RS, Focus St mk2 and Focus RS mk3, also for 2.0 ecoboost. Somebody told me is the same valve because there is no other valve with that shape, but... I didnt believe that.
@roberthein2156 5 жыл бұрын
Ok, so explain why or what would be the purpose of changing this athomisphic (?) My spelling,Auto correct is ?, valve? What does it do, changing it will improve what? How much? Where to get it? Again why?
@doc2633 3 жыл бұрын
hello sir,just ask can you tell me the distance between from this Triangular 3 hole from dump blow off valve;;?? **great job
@DIYToona 3 жыл бұрын
DoC I don’t understand. The distance between each triangular hole?
@doc2633 3 жыл бұрын
@@DIYToona yes.. this is exactly what I want to know
@DIYToona 3 жыл бұрын
DoC Hey sorry it took so long to reply. I had to take the measurements myself. So center to center each hole is aprox 2.024” away from each other in a triangular pattern.
@danielwiles4204 5 жыл бұрын
Did it throw any codes? Because am thinking about getting one for my 1.4 chevy cruze
@danielwiles4204 5 жыл бұрын
And did u put the factory spring back into the new one?
@DIYToona 5 жыл бұрын
No it didn’t throw any codes whatsoever. And that was with factory tune. I don’t think factory recirculating valve spring will fit the forge (but I’m not positive). I didn’t do a spring change. The forge comes with a spring installed, plus an addition stiffer one for more aggressive tunes with higher boost.
@jeredclark5637 5 жыл бұрын
I just had to remove mine yesterday as it was spraying oil out of it when it was activated by letting off the throttle. be careful with dump valves!
@christopherreyes3467 Жыл бұрын
Did you put it without the spring?
@DIYToona Жыл бұрын
What you’re asking might be covered in the pinned comment. My guess is you’re asking about the spring that’s part of the factory diaphragm seen at 2:21. No that does not get reused with the aftermarket valve.
@GriiffixPVP 4 жыл бұрын
What kind of tune do i need after installation?
@DIYToona 4 жыл бұрын
GriiffixPVP Some sonic owners claim because of the small displacement engine and low psi that a tune is not needed. I wanted a little more HP so went with Bad News Racing (BNR) who tuned my car to include the atmospheric bypass valve. HOWEVER, I was driving my car without a tune with this valve installed and never got any caution advisory codes.
@ryanmyers8957 3 ай бұрын
Is there a link to where I can order this part? I'm in Canada
@DIYToona 3 ай бұрын
Link is in the description
@alexnava7664 4 жыл бұрын
Do you need a tune after this being done..i saw on another video that you did
@DIYToona 4 жыл бұрын
Some sonic owners claim because of the small displacement engine and low psi that a tune is not needed. I wanted a little more HP so went with Bad News Racing (BNR) who tuned my car to include the atmospheric bypass valve. HOWEVER, I was driving my car without a tune with this valve installed and never got any caution advisory codes.
@alexnava7664 4 жыл бұрын
@@DIYToona nice thanks for the info how long did u go befor the tune..how much did it cost for bnr tune
@DIYToona 4 жыл бұрын
Alex Nava I drove 300 miles with no tune and didn’t have any issues. The tune cost $375
@alexnava7664 4 жыл бұрын
@@DIYToona what did the tune exactly consist of was it a remote tune
@DIYToona 4 жыл бұрын
Alex Nava I sent a list of the mods done to my sonic and requested a “mildly aggressive tune” on 93 octane. I loaded the tune file with a purchased handheld.
@kingturk3918 3 жыл бұрын
Trying to get a actuator.but dont know what spring to install. For my stock chevy trax 1.4 turbo
@DIYToona 3 жыл бұрын
KING TURK are you looking at the ZZP wastegate actuator?
@kingturk3918 3 жыл бұрын
@@DIYToona No another k04 type. It comes with A yellow spring installed. 1.0 bar spring.
@kingturk3918 3 жыл бұрын
Unfortanetly i have a paypal issue that zzp only use overseaa.my country is not compatible with paypal so i had to get a universal 14.5 psi seting actuator from alibaba
@ultrarp5 5 жыл бұрын
Where or how did you get that grill?
@DIYToona 5 жыл бұрын
Jacob Trujillo I did a “bowtie delete” widened the lower opening and fabricated the new insert. I really need to make a matching one for the upper as well.
@ultrarp5 5 жыл бұрын
@@DIYToona looks awesome! I would like to do a mesh for mine
@Official-mopardaily 5 жыл бұрын
What do you do if my odometer reads dashes after i changed the battery?
@DIYToona 5 жыл бұрын
Are you getting a check engine light as well? Typically that occurs when there is a module communication fault.
@Official-mopardaily 5 жыл бұрын
DIY Toona nope. Its just dash marks across
@DIYToona 5 жыл бұрын
I'm really sorry, I've never seen or read about that issue, nor can I find any information about the dashes being isolated separate from a check engine light. Was your old battery disconnected from the car for an extended amount of time?
@r335 2 жыл бұрын
where do i get one of those valves for a 2014 fiat 500l?
@DIYToona 2 жыл бұрын
This might be what you’re looking for. Check the exact specs of your engine and hardware as well as the details on the website before purchasing. 500madness.com/fiat-500l-blow-off-valve-forge-motorsport-14l-multi-air-turbo-atmospheric-1843
@andysalgado4673 Жыл бұрын
Anyone has a recirculating bypass valve for their rs?
@mrcivicsi20 5 жыл бұрын
How has the car been running since you installed the atmospheric bov and do you still have it installed?
@jeredclark5637 5 жыл бұрын
I installed this month ago and I had to remove it yesterday because oil was spraying out of it
@mrcivicsi20 5 жыл бұрын
@@jeredclark5637 whoa. What happened.? Is it because it's an atmospheric and not recirculating?
@jeredclark5637 5 жыл бұрын
yeah I had white smoke coming out from my car after I let off the throttle. so I took it to get it checked out and they told me that the aftermarket bov was causing it. when I took it off it had wet oil on it
@jeredclark5637 5 жыл бұрын
just going to get a cold air intake and add a bov there. I think the problem definitely.was the atmospheric and not recirculating.
@mrcivicsi20 5 жыл бұрын
@@jeredclark5637 oh wow. that's not good. Did u tune the car tho?
@douglasabreland3930 4 жыл бұрын
Hey man I made the mistake of getting a bypass adapter instead of a blow off valve on my buick that shares the same platform....it threw a code? How would this be any different? I dont want to loose 100 for R&D
@DIYToona 4 жыл бұрын
《BRELAND 》 Can you paste a link to exactly what you bought. Also, which code are you getting?
@douglasabreland3930 4 жыл бұрын
@@DIYToona EMUSA Blow Off Valve Adapter Kit for 1.4t Sonic Models-FMSPF14A www.amazon.com/dp/B082HNDNVJ/ref=cm_sw_r_cp_apa_i_SX5hEbA549YSC
@douglasabreland3930 4 жыл бұрын
@@DIYToona I am unsure of what code as for I took it straight to auto zone had then reset the code and I put everything back to stock.
@DIYToona 4 жыл бұрын
《BRELAND 》 That part looks as though it would go between the turbo housing and the factory piece with the vacuum line attached. I’ve never seen such an adapter. If not installed correctly it’s highly possible you were in constant boost leak.
@douglasabreland3930 4 жыл бұрын
@@DIYToona correct it was working just like a bov at first but was letting of a little pressure upon building boost
@tjcline6244 5 жыл бұрын
What brand is atmospheric valve
@DIYToona 5 жыл бұрын
Tj Cline its a Forge.
@AOG_ETH 4 жыл бұрын
Will this work on a 17 cruze.
@DIYToona 4 жыл бұрын
lawzsocom As long as it’s the 1.4L turbo LUV engine it will work. The way some of the bolts are accessed might change due to engine bay layout, but ultimately the steps done on the old valve and new valve remain the same.
@user-qo9qe2wx5r 2 жыл бұрын
8nm 감사합니다
@Daniel-ww3hl 3 жыл бұрын
What would I have to do to make it flutter now?
@DIYToona 3 жыл бұрын
You could have it tuned to produce more of a flutter. The flutter is the sound of peak pressured air between the turbo and intake not being able to enter the engine and instead fighting the turbo. The whole point of a bypass valve to to reduce this.
@mayoalvarado2999 5 жыл бұрын
I try to use a Forge BOV spacer and it's no work , my car keeps the revs too down around 450
@DIYToona 5 жыл бұрын
I'm not familiar with a bypass valve spacer. do you have a link for it?
@mayoalvarado2999 5 жыл бұрын
DIY Toona this is the link of the BOV Spacer in forge... www.forgemotorsport.com/Blow_Off_Adaptor_Plate_for_Fiat--product--1009.html ... i don't have a video
@DIYToona 5 жыл бұрын
That spacer is supposed to be installed with the factory solenoid valve. I don't think it will work in combination with the aftermarket bypass or blow-off valve
@ramonavila4831 4 жыл бұрын
Where can I buy the bypass valve
@DIYToona 4 жыл бұрын
Ramon Avila store.badnewsracing.net/Forge-Motorsports-14T-Atmospheric-Bypass-Valve_p_102.html
Badland Industries
Рет қаралды 9 М.
Mile High Mechanic
Рет қаралды 16 М.
Chidi Boy
Рет қаралды 3,3 М.
RENZ CORP.
Рет қаралды 43 М.
Overheated Chevy Cruze / Sonic 1.4 Turbo LUV Engine Teardown. Don't Drink Coolant, It'll Lock You Up
I Do Cars
Рет қаралды 990 М.
ZZP PORTED MANIFOLD & PCV UPGRADE INSTALL ON '12 CHEVY SONIC| Power & efficiency with ZZPerformance!
EverythingAvron
Рет қаралды 12 М.
Carlos Reig
Рет қаралды 4,1 МЛН
BossHorn - Train Horns with Remote Control
Рет қаралды 112 МЛН
Özden Söğüt
Рет қаралды 17 МЛН