CHEVY VOLT VLOG #75 - 2017 Volt OIL PAN GASKET LEAK ... FIXED!

  Рет қаралды 2,892

Sterling W

Sterling W

3 жыл бұрын

Chevy Volt Oil Pan Leak and Replacement
My 2017 Chevy Volt is now about 95,000 miles now. It has been burning oil for several months. It has been very slow due to the low use of the internal combustion engine. In the past several months, I noticed the oil level dropped about one quart every 3 weeks. It soon grew to losing about one quart every week before I noticed an oil spot on my driveway. I also noticed a burning oil smell.
Btw, my KZfaq vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For Chevy Volt and car gift ideas, check out my Amazon list. Visit: www.amazon.com/shop/sterlingw
The oil filter and drain plug were tight and not leaking. The Chevy Volt's underbody fiber panels ABSORBED several quarts of the oil before the speed of the moving car drifted oil to the exhaust pipes causing the burning oil smell.
my 2017 Chevy Volt mileage on gas about 45,000 to 50,000 gas miles the rest was EV.
Searching the internet, it seems like some 2016 and 2017 Chevy Volt has an oil pan gasket leak early in its production. So it may be the build and the gasket material. Also from the forums, users noted that the Volt needed several days to fix and may cost anywhere from $800-$1600 out of warranty to repair. The reason for several days to fix was due to the gasket material curing or clients returning back to the dealer when it leaked again after the repair.
After doing my research - I decided to do it myself :
1. I didn’t want to spend $1000 or more in repair costs, car rental, and lost time. I figured it take me about 3 hours of actual work and 1 day of waiting for the gasket to cure. And about $40 for a new oil pan hardware , $5 for RTV Silicone Permatex Ultra Black gasket maker, $5 oil filter , and $12 for 0w-20 synthetic oil . The panels were soaked in oil and not sure what the dealer may do or charge me to clean, so I got $12 gallon bottle of degreaser solution, and $6 two cans of Carb cleaner . Total cost about $80 in materials and 3 hours or so in labor.
2. Oil pan replacement generally is pretty simple, and I wanted to make sure the gasket had time to cure and that I was able to clean off all the oil spray on the exhaust pipes and under panels.
Parts List:
1. GM oil pan ( amzn.to/3evyAhE )
2. Oil Gasket RTV Silcone BLACK ( amzn.to/3aAR3Z2 )
3. Oil filter AC Delco PF 64 ( amzn.to/2PiTk3R )
4. 0w-20 oil - 3.8 quarts or so new oil ( amzn.to/2QR1SPV )
5. Carb cleaner to remove oil off exhaust parts ( amzn.to/3dLO7en )
6. Concentrated degreaser to clean panels ( amzn.to/32G4xhJ )

8. 7 mm and 8 mm socket wrench and extender
9. Ryobi angle drill ( amzn.to/3awMzCM )
10. Torque wench (18 lb - 20 lb ) amzn.to/2QWGZm4
11. Thin metal trim pry bar ( amzn.to/3aB6ikO )
12. Special tool - 3mm x 10 mm metal slot bar ( or use two very large flat head screw drivers. )
13. Plastic or metal razor blade ( amzn.to/32IKwHw ) amzn.to/3gNfoPx
14. Car Ramps amzn.to/3nf5QOa
15. Gloves amzn.to/3nf06UG
16. WD40 - solvent melts silicone amzn.to/3erccpQ
17. Clean rags
18. Newspaper or cardboard
19. 5 gallon bucket for the degreaser solution.
AC Delco carbon in cabin air filter: ( amzn.to/2XRS3PM
Engine Air Filter: amzn.to/2K5qzPz
Other Chevy Volt Vlog How to Vids
• CCV#70 - DIY 2016-2018...
Thank you for visiting and supporting SterlingW KZfaq Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!
SOCIAL MEDIA:
Join me on KZfaq: / sterlingw8
Instagram: / sterling.wong​​
Twitter: / sterlingwong8​​ ( @sterlingwong8 )
Website: www.sterlingwong.com​​
Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2

Пікірлер: 11
@nickcaringi7416
@nickcaringi7416 Жыл бұрын
Good advice all around. I thought I had another pry bar laying around but couldn't find it, ended up using an x-acto knife to cut away at the old sealant until I could get a flat head in there to slowly pry away. This is very easy to do yourself with basic tools. Make sure you take your time cleaning off everything before reassembly, if you think it's clean enough, clean it again, the previous owner clearly had this replaced at some point and it was a mess. The torque specs for the oil pan bolts are 8 ft-lbs
@brad741
@brad741 10 ай бұрын
This issue is happening to my 2017 Chevrolet Cruze LT gas
@boetiekid
@boetiekid 2 жыл бұрын
Hey do kno the torque spec for the oil pan bolts?
@LDB1121
@LDB1121 Ай бұрын
Where did u get the rectangle bar?
@TeeDeeDubya
@TeeDeeDubya 7 ай бұрын
Do not use metal razors!
@CRuM770
@CRuM770 Жыл бұрын
Was there a particular reason you changed the pan? It looks in perfect condition. Mine is completely rusted and it's only 6 years old.
@SterlingW8
@SterlingW8 Жыл бұрын
The pan gasket seal was leaking
@CRuM770
@CRuM770 Жыл бұрын
@@SterlingW8 normally you don't replace the pan because of a leaky seal, you just strip and redo the seal. Was there anything visibly wrong with the pan?
@SterlingW8
@SterlingW8 Жыл бұрын
@@CRuM770 true, thinking back, I think it cost like me $20 or so for the pan with screws and new drain plug and washer - from GM parts. And me not knowing what was leaking (gasket or pan) i just spent the $20 vs the $9 for a new drain plug and washer.
@CRuM770
@CRuM770 Жыл бұрын
@@SterlingW8 that makes sense. I will need to change mine soon so glad you did it and recorded the process. Cheers!
@jeffreycisneros8560
@jeffreycisneros8560 3 жыл бұрын
First
Chevrolet Cruze 1.4 Turbo: Oil Pan Replacement
35:00
South Main Auto LLC
Рет қаралды 228 М.
Should You Use RTV with a Gasket - How to Replace an Oil Pan Gasket
13:42
Ratchets And Wrenches
Рет қаралды 98 М.
Amazing weight loss transformation !! 😱😱
00:24
Tibo InShape
Рет қаралды 63 МЛН
DAD LEFT HIS OLD SOCKS ON THE COUCH…😱😂
00:24
JULI_PROETO
Рет қаралды 17 МЛН
Inside Out Babies (Inside Out Animation)
00:21
FASH
Рет қаралды 19 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 51 МЛН
2017 Chevy Volt engine replacement
23:12
Casey Carr
Рет қаралды 9 М.
Chevy Cruze Oil leak "Drivers side" - 2011-2017
13:03
DIY with Michael Borders
Рет қаралды 116 М.
Chevy Volt Battery Pack Disassembly and Reuse | Part 1
15:28
BenjaminNelson
Рет қаралды 43 М.
How To Perform a Compression Test - EricTheCarGuy
10:00
EricTheCarGuy
Рет қаралды 2,2 МЛН
Chevy Volt Transmission Service
6:54
Mr.Electric
Рет қаралды 10 М.
бим бам бум💥💥 типа..
0:18
Ma1x1
Рет қаралды 7 МЛН
It worked for me)
0:19
F&T Team
Рет қаралды 23 МЛН
Choices for your loved ones❤️
0:15
ISSEI / いっせい
Рет қаралды 18 МЛН