CHEW THE FAT! CHEWING UP SOME MASSIVE FAT STUMPS WITH THE TMC CANCELA!

Рет қаралды 21,249

5 ай бұрын

Well this got INTENSE! We are trying to chew down some MASSIVE pine fat lighter stumps as well as some big red oaks stumps that need to GO! The TMC got the job done but to wore the teeth down to the NUB!
Instagram: idigit4
Need heavy equipment or a mulcher? Call www.carolinaconstructionequip...
704-363-6432
USE PROMO CODE: IDigIt
#mulching
#stumps
#satisfying

Пікірлер: 75

@sharonfreemanpace1011 5 ай бұрын

Super Munchie does an excellent job! I love watching it completely wipe out stumps 😊. It makes me wonder what kind of inventions will be around in the next 50 years.I can't believe I am in awe of a machine.

@garypitts9317 5 ай бұрын

Tough stumps. A country boy will survive.

@dark_angel_don9766 5 ай бұрын

You dont use the edge of the mulcher that much, can you move the cutter teeth from the edges to the middle to save you some money?

@heatherlane9270 5 ай бұрын

Stumps be gone - that mulcher is fantastic - makes life easier.

@zzMikaelKalelzz 5 ай бұрын

You should win streaming awards for your content dude.

@Yorkie285 5 ай бұрын

You sure do a good job on every video.

@chipper841 5 ай бұрын

Great Super Munchie has a BIG appetite and the teeth to chew his food up!👍👍

@kirk467 5 ай бұрын

I seriously think you are lucky to have the use of the TMC mulcher Davin, I don’t think any other mulcher can handle these stumps like the TMC! I’ve watched videos on mulchers and this one seems to be the most durable and quickest recovering mulcher !

@shirleyc7175 5 ай бұрын

Boy, that machine really made fast work of those stumps.

@rockypaakaula3785 5 ай бұрын

“Yeah Baby!” Makes Noise, Goes Fastest! “I WANT One!”😂

@johnb.2936 5 ай бұрын

We need IdigIt4 tees and sweatshirts! I happen to like your logo which would nice on a t-shirt.

@garymessina1609 5 ай бұрын

Well that's a lot easier than using a stump grinder great job great video thanks Davin

@Dave-ei7kk 5 ай бұрын

Huh? That job was crying out for a stump grinder with carbide teeth. I’m not talking about one of the toy grinders, but a commercial grade unit. It would be faster and grinder a lot more of the stump. The last one I used could reach 18” below grade. This property owner will have holes in his landscape as the leftover wood below grade rots away over the next few years.

@larryperdue508 5 ай бұрын

You Should try the double edge carbide teeth 😊

@kirk467 5 ай бұрын

Thanks for sharing, those stumps must be petrified my friend! Sending prayers and positive vibes to you brother! Kirk from Louisiana! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸👋🏼

@jenniferturner7935 5 ай бұрын

love the upbeat music on the time-lapse farther into the video. it really goes well with the mulching ! great job !

@jamesalinio5277 5 ай бұрын

I would have thought that you wouldn't want to get the teeth in to the dirt, but I don't know everything

@brentking-gmailking2570 5 ай бұрын

Good job

@Dave-ei7kk 5 ай бұрын

That job was crying out for a stump grinder with carbide teeth. I’m not talking about one of the toy grinders, but a commercial grade unit. It would be faster and grind a lot more of the stump. The last one I used could reach 18” below grade. This property owner will have holes in his landscape as the leftover wood below grade rots away over the next few years.

@idigit4967 5 ай бұрын

We are only grinding the stumps next to the ditch as to dig them up would destroy the ditch banks. All the other stumps are being removed. By grinding the tops of the stumps next to the ditch we are leaving the root systems in tact so that will hold the ditch banks together until new vegitation can grow that will reduce erosion.

@AnomadAlaska 5 ай бұрын

Hey ya'll. Happy Holidays. Let's get this dude over 100k. Subscribe!

@idigit4967 5 ай бұрын

Awesome let's go! Happy Holidays!

@drewgardner81 5 ай бұрын

Getting it done sir. Good job!!!!

@kirk467 5 ай бұрын

That baby is chewing it up brother, I love this thing! I know you do too or I’m pretty sure you do! lol 😂. This is the best test of all! 👌🏻👍🏻👍🏻👌🏻

@larrymercer3448 5 ай бұрын

Awesome job

@susansnell9125 5 ай бұрын

One if the smallest ones with a rotten core seemed to be one of the worst, but a good job none the less.

@frankmeiser8287 5 ай бұрын

Good video again🇺🇸👍😇😇⭐

@AstonVilla1969 9 күн бұрын

Hey dude i love the munchie vlogs but just one thing ! When you are mulching stumps you put the head down the stump to fast and it stops the head turning or slows it right down and you have to back off If you lower it down very slowly it will keep turning and get threw the wood better 👍

@ianparker3486 5 ай бұрын

Great video that grinder is a beast

@lisasmithhill2653 5 ай бұрын

Love me some "munchie". Eat those stumps baby.... great video!

@randycharest4507 5 ай бұрын

TOTALLY ENJOYED WATCHING THE VIDEO DAVIN 😊

@paivijaaska9153 5 ай бұрын

That was SO much fun!!

@GoBlue79 5 ай бұрын

Great video!

@kirk467 5 ай бұрын

I like that hose protector on the mulcher!

@kirk467 5 ай бұрын

Nice to hear some good music brother and the Timelapse part, you always pick good music! 👌🏻👍🏻👍🏻

@E.Meyers 4 ай бұрын

Love the music in this video! I noticed it’s the same as in the greenhouse vid. 😊

@idigit4967 4 ай бұрын

Yes it is!

@johnkranz4004 5 ай бұрын

Very Nice Work

@stephenadams595 5 ай бұрын

It might be easier to drill a hole and light a fire in the stump. Most of it would be burnt out below the ground. I've found this to be a very effective method for clearing stumps.

@Chuck5653 5 ай бұрын

Holy smokes...the teeth are pretty shot. GREAT JOB getting them stumps.

@slamsshenanigans2296 5 ай бұрын

I was gonna say I thought you were stalling the head more than normal so was thinking they were hard. What’s the advantage/disadvantage to starting low and working up vs top down Davin?

@Yorkie285 5 ай бұрын

Is it expensive to replace the grinding teeth?

@2wwwilly 5 ай бұрын

Very ex ..couple of hundreds depends diamond,carbide ,or tungsten . .normal wear you just sharpen with grinder or reversal teeth on some models..😅😅😅 as well straight shaft teeth cost 3-5k 😅😅

@rwhit7926 5 ай бұрын

They aren’t as expensive as you might think. Growing up my grandfather always told me a knife is useless if doesn’t have a sharp edge.

@tomswindler64 5 ай бұрын

Very nice job,machine is impressive,but helps having you run it.just keep doing what your doing.👍👍👍😎😎😎

@ianbruce4314 5 ай бұрын

Great job, I noticed some stumps were much harder To munch,

@jeffbailey7765 5 ай бұрын

Good job and video Brother

@idigit4967 5 ай бұрын

Thanks Jeff!

@jeffbailey7765 5 ай бұрын

@@idigit4967 you’re welcome brother

5 ай бұрын

Work on a farm for 20 years my main job was flailing Road sides ditches and hedges the flail mower had 4 belts on it and yes tell tail signs that belts are on way out oh yes and on a farm there are loads of belts on most equipment plus I've somehow got a mechanics background oops

@sic22l 5 ай бұрын

I think dry dirt/stones/clay was the one that chewed up the teeth, there was a lot of it around the stumps.

@mikepici5553 5 ай бұрын

Love that setup as well davin, i definitely need an 120 and a concella, or the prinoth im not picky

@idigit4967 5 ай бұрын

The ASV is an awesome machine and both the Prinoth or the TMC Cancela are both great heads. Would recommend either!

@MrNiklas1967 5 ай бұрын

Hi buddy

@defresurrection 5 ай бұрын

At 1:20, it's a beautiful cloud pattern! Closed Captioning says the drone of the machine is music... I don't disagree. lol

@laqinkayan5175 5 ай бұрын

Saya sangat suka alat ini

@claykorth7244 5 ай бұрын

IS it considered efficient to grind stumps with a drum mulcher? Since it kills the teeth how do you charge for a job like this? Price per stump?

@ToeTag1968 5 ай бұрын

I mean, if that's the tool you have, it seemed like it did a good job. But the Fecon Stumpex is fun to see in action, too :)

@rwhit7926 5 ай бұрын

Depending on the stump grinder this is much more efficient. When you go subsoil depending on your terrain you might run carbides in the center.

@stateofjeffersonwoodworksllc 5 ай бұрын

Is that iron wood holy crap.

@ginozanga2129 5 ай бұрын

How often do you sharpen teeth

@robertbarnum7541 5 ай бұрын

A hard day Davin.

@randydobson1863 5 ай бұрын

hello Devon it's is randy and i like yours video is cool thanks friends Devon friends randy

@donnal.oglesby4806 5 ай бұрын

Dand Devon, thoser must of been some nasty stumps to grind those teeth down the way a lot of those teeth ended up. YIKES!! Personally I would not try and push another job out of her, without getting new teetch, just to be on the safe side and not damage your machine. just saying.. God bless.

@chas1355 5 ай бұрын

You now know what they mean when they talk about hard wood. LOL. Those stumps that were so hard appeared to be wild cherry which is a very hard wood.

@Jonesforestrymulching47 5 ай бұрын

Just here to see how many people say you shouldn't grind stumps with a mulcher.

@idigit4967 5 ай бұрын

🤣 yeah me too LOL

@BoomVang 5 ай бұрын

You once called carbide teeth useless, but how about now?

@idigit4967 5 ай бұрын

I never said they were useless in general, just useless for what I do in my area. Context is everything homie.

5 ай бұрын

When belts sqeal like that there to loose or totally gone and need changing for someone to say its normal has no idea 🤔

@idigit4967 5 ай бұрын

And how many hours do you have running forestry mulchers....?

@petepayne19710 5 ай бұрын

16:02 you need to stop doing time lapse you're wrecking the VIDEO'S by doing that. I love the sound of the tree's being chipped up and the grinding up

@LucRom-kz5uw 5 ай бұрын

Good work fantastisch men you te best fried Top 🚜🚛🪤😎🎧🎄👍🌤🧤🍻🪵

@jamesalinio5277 5 ай бұрын

I would have thought that you wouldn't want to get the teeth in to the dirt, but I don't know everything

@rwhit7926 5 ай бұрын

When bidding a job you look at time, area and the biggest thing is wear on your knives. Anyone as seasoned as Davin knows and accounts for all these things. Main priority is achieving the end result the client is looking for.