Making TREASURE out of SHOP TRASH! Bringing to life a Simpson Pressure washer with a Kohler 6.5 HP

Рет қаралды 62,607

2 жыл бұрын

Thanks for tuning back into Chickanic! Every year we get in over 2,000 pieces of equipment, but many of those end up not being repaired. Most of the time customers will leave their broken units so we end up with TONS of winter projects! Check out the treasure I made today!!
If you found this video helpful, please LIKE, SUBSCRIBE and COMMENT!!
If you would like to support my channel, find my Amazon Wish List HERE!
www.amazon.com/hz/wishlist/ls...
Buy your own Chickanic T-Shirt or Hoodie HERE!
chickanic.com/
Want you own SIMPSON pressure washer like the one in this video? Find it HERE!
www.amazon.com/gp/product/B08...
Want you own Wera T-handled 10mm nut driver? Find it HERE!
www.amazon.com/gp/product/B08...
Don't forget the Were T-handled 8mm nut driver! Find it HERE!
www.amazon.com/gp/product/B08...
My name is Bre. I took two years of small engine repair at the local college. When I left school, I fell into a wonderful job at a local small engine shop where I worked the counter for a couple years. In 2010 my husband and I opened up our own small engine shop in central Arkansas where I am able to work alongside my family and best friends. We see over 2,000 pieces of equipment every year, and answer 1,000's of small engine questions. We specialize in brands such as Briggs and Stratton, Kohler, Echo and Shindaiwa, but work everyday on MANY other brands like Stihl, Husqvarna, Honda, Craftsman, Remington, Red Max, Troy Bilt, Scag, Bad Boy, Hustler, World Lawn, Poulan, Mantis, Etc.. Hopefully, my experience I share, will save you Time, Money and Frustration in the future!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes. Please use all possible safety precautions when repairing and operating your small engine equipment.

Пікірлер: 233

@Chickanic 3 ай бұрын

Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B

@riteshprasad4103 11 ай бұрын

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust kzfaq.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

@cabman86 2 жыл бұрын

My dad and I would go to the scrap yard and load up with as many mowers that would fit in the truck. We would pay the scrap price which was about $10. We would build about 10 mowers with them then take the leftover stuff back to the yard and load up again. We had buyers for every one we rebuilt.

@garny3766 2 жыл бұрын

Things I tell folks about using PWs… 1) before hooking up garden hose, turn on faucet and flush air out. 2) after water supply hookup, turn on water and pull trigger until water flows without out air. 3) with PT running in standby, if you don’t want to shut off engine, turn nozzle or remove to get to low pressure. Prop trigger on. Water will pass thru which in turn reduces heat in the pump and negate blow off of thermo relief on pump. 4) store inside during freezing weather. 5) if you don’t want to follow these step…buy an electric one next time😆

@ZomBeatBrainZ 2 жыл бұрын

Better to purge air out the pump without the spray tip on. Just start the engine, pull trigger and let the water flow without restriction. It usually takes about 30 seconds to a minute on a full size triplex commercial pump. You are correct about not letting these small units idle. There is not a bypass when not spraying like there is on commercial machines. The bypass keeps fresh water flowing through the pump at all times.

@fnyack 2 жыл бұрын

No, no, no. Today is Christmas, you should be getting pampered and sipping on something strong and relaxing. Merry Christmas and Happy and Healthy New Year, oh yeah, and make it a prosperous year.

@B4TS1 2 жыл бұрын

Last year I got a Honda 13 hp GX 390 pressure washer for free. It was left outside over the winter and the pump froze and cracked. I now have a replacement engine for an old 1968 Sears Suburban garden tractor. Parts is parts!

@Chickanic 2 жыл бұрын

Score!

@georgemyers6518 2 жыл бұрын

I’ve been on the lookout for a Honda GX 390 engine with a quiet bottom end and good compression. That’s awesome that you stumbled onto the one that you found

@nicklutz61 2 жыл бұрын

Nice save Chicanic! Love your videos. Keep up the great work. To everyone watching; thumbs up for Chicanic so we can see more awesome content!

@hansdybka1331 2 жыл бұрын

thank you for taking the time to troublshoot and then video the failed effort...such an amazing learning experience...for us DIYers...

@gregmaxfield4405 2 жыл бұрын

Nice to see something rescued from the junk pile. The ultimate recycling. 🎅🚜🐻 Bear Queensland Oztralia. Love your work.

@Chickanic 2 жыл бұрын

Thanks Greg!

@dmann1209 2 жыл бұрын

Awesome video. Just imagine how much value is thrown away in lawn equipment parts. Thanks for making the video. Nice Mercury Cougar.

@CarlMadsen 2 жыл бұрын

So glad it's working and not trash, when it has a lot of life left. Great job and great tip on keeping the water flowing in my pressure washer. I learned something new watching your channel and possibly saved my pressure washer! Thank you!

@almclean4835 2 жыл бұрын

The pressure washer didn’t look like it had done much before the pump failed. You did the right thing saving it, nice one

@Chickanic 2 жыл бұрын

The engine looked barely used. I think I scored. Thanks for watching again Al!

@spacecat7247 2 жыл бұрын

@@Chickanic Honda......a win all day

@johncrawley2219 2 жыл бұрын

I love your comment on the kohler looking like a Honda. I have noticed that at my shop. Great video. Look forward to seeing more.

@dharley189 2 жыл бұрын

Great job on washer. I used to work on cars like that Cougar all the time. Entered workforce in 72. I do small engines as a hobby now. Thanks for the confidence you give ‼️

@tomschmidt381 2 жыл бұрын

Great save love Frankenstein fixes. My wife and son chipped in years ago and bought me a pressure washer. I was stupid and left it in an unheated shed over the winter, not realizing the pump is not self draining. The pump cover was cracked. I found a replacement part that was close but not exact. With judicious use of different o-rings I got it to work without leaking. Now I use Pump-Saver and store it where it never goes below freezing.

@larrywarolin7215 2 жыл бұрын

I always used pump saver but left my pressure washer out and it was stolen. So you can't really expect pump saver to be enough.

@tomschmidt381 2 жыл бұрын

@@larrywarolin7215 I don't mean to laugh at your loss but got a chuckle out of your post. That is one of the advantages of living in the semi-boonies. A thief would have to be extremely brazen to come onto the property to steal stuff.

@matthewwearsch242 2 жыл бұрын

I love the boneyard looks like a good assortment of spare parts.I also loved seeing you put a "Frankenstein power washer together"Thumbs up chicky

@dandydonslife9869 Жыл бұрын

Amazing, I love making something out of nothing. Great job, thanks.

@christastic100 2 жыл бұрын

So mad max 😁love those post apocalyptic scrap heap challenge jobs . Brilliant

@1rosalee 2 жыл бұрын

Ray from Dyno Mow here! Love your work and love small engines! I build and run drag racing riders!

@Turningwrenches85 2 жыл бұрын

Awesome that you had a pump on hand to fix this. Glad u saved this pressure washer never seen one with a kohler 6.5hp 🔧

@ChevyCitation 2 жыл бұрын

Merry Christmas Chickanic 🎄

@spacecat7247 2 жыл бұрын

Love those junkyards. So much potential for Frankenstein projects!

@upsidedowndog1256 2 жыл бұрын

Really cool, I love mix and matching parts. Sometimes you end up with something better than it ever was! Cool old blue Cougar.

@corysgardentractors7084 2 жыл бұрын

Loving the boneyard. See alot of machines id love to have.

@alanknoll5540 Жыл бұрын

Another awesome video of fixing up a pressure washer. It worked great.

@garyclifton2180 2 жыл бұрын

Glad you check all the old stuff BRE sad to see everything go to tip it's good the stuff you teach us all to save money in shops yet it could cost you money if everyone starts fixing the own things lol great content BRE.x

@baldeagle242 2 жыл бұрын

Another great video young lady! Tiss the season to fix the leftovers. Merry Christmas!

@Chickanic 2 жыл бұрын

Thanks Steve! Merry Christmas to you!

@dougseaman8791 2 жыл бұрын

That Kohler engine sure looks like a 6.5hp Predator (Harbor Freight) which sure looks like a Honda. Since they come out of the same Chinese factory it appears that Kohler is into making money now instead of engines. I used the 6.5 Predator on a Trak Vac. Worked great, good engine.

@bennieharrison9965 2 жыл бұрын

That is fantastic that you could do that!

@patthesoundguy 2 жыл бұрын

4 legs good, three legs better... 😉 Because it's free. Great tip on keeping the wand wide open, I always do that. I'm always scared the pump will explode 😱.

@brianmcintee6647 2 жыл бұрын

here in ny people leave power washers out in the shed all winter and the water in the pump freezes and cracks the housing

@Chickanic 2 жыл бұрын

Yup! That is quite common here too. Thanks for watching!

@stumpyssmallengines 2 жыл бұрын

love recycling small engine things good for you so jealous of your stockpile

@robertmailhos8159 2 жыл бұрын

That pressure washer is the same one I have the pump on mine went bye bye so I called Simpson pressure washer customer service I was told about three different repair shop,s for Simpson pressure washer,s they told me they work on the engine but the pump is a no go long story short Northern tool piut a different pump on my unit. Merry Christmas to you young lady 💐 and your family

@robertmailhos8159 2 жыл бұрын

Thanks for the heart young lady 💐

@michaelmoore3738 Жыл бұрын

Thank you so much for your channel you have help get things running again

@charritolopez8223 2 жыл бұрын

nicely handled good job keep up the great work your doing may our lord and saviour keep blessing you amd your loved ones greetings from good ol DEL RIO TEXAS.

@frankholehouse1393 2 жыл бұрын

Brilliant video thank you very much, I would like to see more videos like this one bringing old machines back to life maybe a ride on mower next you have amazing skills, it would also to see your husband repair a machine now and then .your channel is viewed all around the world we all learn from you ( thank you )

@keithosterkamp6207 2 жыл бұрын

Nice job. Love the Cougar too. Had a 68 fora while, lots of fun.

@soulassassin2494 2 жыл бұрын

Hey Bre, You brought it back to life again and love seeing you displaying your skills 🙌🤘🖤🔥💯

@jamesbubnick Жыл бұрын

I've bought a few hundred broken pressure washers to fix and flip. Out of all the lawn equipment I've bought I have the best luck making decent money out of them. I've had that exact same pump before and you're better off just installing a generic pump like the one you did. Unless it's a CAT, MITM, or AR it's not worth the hassle to fix. Also I've had good experience w/ CanPump as replacements.

@andrewjohnston6230 2 жыл бұрын

Merry Christmas to you and your family

@my2be4me 2 жыл бұрын

WD40 is said to be gunsmith's best friend, ethanol containing gas is small engine repairmen's best friend (income wise, of course) ;-)

@baileyhatfield4273 2 жыл бұрын

I had a guy just the other day come in with a chainsaw, mind you i'm working on anything from small engine to outboard to ATVS,cars ect. Anyways, he came it, the saw used to run fine and now it doesn't. Had old gas, he put in ''new'' gas and still won't run. Great compression great spark, i quickly give the gas the sniff test...it's rotten as gas gets, to the chemical smell that lingers in your brain. Must of been ''new'' from a gas jug sitting around for years. Anyways, carb clean and it's good to go. So much of what is see on things that are not used often, or left for time, is just bad gas. Which is great for work, simple too but yeah.

@freeplayfrank7736 2 жыл бұрын

Here I sit watching youtube and nursing a sick goat on Christmas(: Good vid, love the 68' cougar, I used to have one like that. Merry Christmas Bri, and a happy New Year from your Canadian connection,take care.

@leifvejby8023 2 жыл бұрын

That's how I get my machinery, converted bin fodder!

@johnhudson333 Жыл бұрын

Excellent video. To the point. Thanks 😊

@jmabs5096 2 жыл бұрын

I have the same Simpson setup, couple grips I have is how low the frame is, it sucks, I removed mine and stuck it on a larger taller chassie. Also if it's not on level ground, the washer had some serious vibrations and would walk away, turn sideways etc. Oh and the thermal relief valves SUCK in these units. Once they blow once forget about it will keep leaking, I gave up after 3 oem Simpsons. Wish they had a trigger lock on these, the pumps will blow the relief valve in 20 seconds or less and ruin them

@marcelcanuck 2 жыл бұрын

Gotter set on auto thumbs up for the Chickanic , great save on that pressure washer👍

@Chickanic 2 жыл бұрын

Thanks Michel!

@footfrek 2 жыл бұрын

Trash to treasure would make a great playlist or even regular series, especially for the offseason. You might even show y'all working on that Cougar. A gear head is a gear head ya know.

@111000100101001 2 жыл бұрын

It’s actually not that surprising that the pump is toasted. Most weekend warriors buy a “high end” pressure washer at Lowes and don’t ever bother to check/change oil and don’t even know the pump contains oil either. Eventually they take it to the dump and start over…win for us :)

@thomasreece3903 Жыл бұрын

Another Great video. I just picked up power washer and got the motor running. The pump seems to be ok also if I can only find the sprayer wand I’ll be in business.

@geoffwalker3969 2 жыл бұрын

loving your channel, you are very thorough with your work, im learning lots, hi from Australia!🙂

@danielrobert7181 2 жыл бұрын

Dear Chickanic, the cause for gas not coming out of the fuel line most probably had nothing to do with it being clogged. There is a fine wire mesh filter at the bottom of the gas tank. It will allow gas through but not water. As the tank's content was mostly water, flow was blocked. Regards !

@kylesavin6476 2 жыл бұрын

Love watching you and your videos. Good work chickanic

@BrucesShop 2 жыл бұрын

I tried for 2 years i tried to save pumps and fix them. Videos too. After a major effort I mostly now replace the pumps. Just like you did here. Great work. See you later my friends.

@haneyoakie14 2 жыл бұрын

I noticed that Bruce went down the pump repair road and found that it wasn’t generally worth it. I remember those videos and that the best remedy was a new Italian pump, I forget the manufacture name. Merry Christmas Bruce and Happy Boxing Day!

@111000100101001 2 жыл бұрын

Annovi Reverberi Pumps are cheap but decent replacements for the chinese “one season wonders”! If you change their oil every 40hrs they’ll last for years:)

@BrucesShop 2 жыл бұрын

@@111000100101001 Thanks Tank cool

@robfahey1349 2 жыл бұрын

I haven't caught many of your videos as I would like to, but glad you have a good amount of subscribers. Great job and that's interesting never thought about letting the pressure washers idle too much. Great job. The engine still appeared to be surging maybe tear into the emulsion tube or bowl nut and clean them really good with carb cleaner?

@woodlandburl6648 2 жыл бұрын

Nice! Good for you.

@rs2143 2 жыл бұрын

Those bone yards have a lot of money to be made in spare parts on ebay if you had time to strip the good sellable item in the spring each year . But you need to know what parts in demand and have time for striping and listing and shipping . I have bought parts on ebay used to repair my stuff and saved a lot over new dealer parts with Mark up that made repair cost feasible. And sell them online doest reduce your dealer parts business because those sales aren't in your local area.

@garny3766 2 жыл бұрын

Ive been telling folks who are building homemade high power/flow wood splitters look for old lawn tractors. Nowadays many have >20hp engines. Only downside is most they are vertical shafts but minor issue for most builders.

@99andrianmonk 2 жыл бұрын

Nice job, and very useful / helpful video. Thanks.

@rickthelian2215 2 жыл бұрын

Nice Frankenstein repair on the High Pressure Cleaner Bree😀 You cleaned up on this one🤣

@GuysPlayingWithTools 2 жыл бұрын

You have a great "junkyard"! I could stay busy out there for MONTHS 😁

@Pure_KodiakWILD_Power 2 жыл бұрын

Interesting tidbit about idling..... I need to figure out why my echo 266 that I converted into long hedge trimmers a few years ago is bogging down now....after putting in a new fuel filter, tank vent and air filter, then checking for carbon behind the muffler, I might just see if I can find a carb on Amazon.

@mikejerrett7354 2 жыл бұрын

Recycling at its best 👌, enjoy the holidays

@Chickanic 2 жыл бұрын

Merry Christmas Mike!

@menditman2004 2 жыл бұрын

Good job well saved, you can’t fix them all there just isn’t enough hours in the day and as you say some aren’t worth fixing due to parts cost. I just pick and choose the best, I mainly specialise in Hondas as I use them for work and know a lot about them also they have good resale value. You’ve got plenty of good make machines in your junk pile, as you know that’s worth it’s weight in gold alone for spare parts. Good video 🙂👍

@haneyoakie14 2 жыл бұрын

Especially in this parts shortage environment, having a parts supply in the backyard is a plus.

@rickeyrobbins7656 2 жыл бұрын

Cool work good

@ElmhorstJ 2 жыл бұрын

NICE Mercury couger!!

@orionwarren4244 2 жыл бұрын

Nice 'Daisy's'! 😉

@haneyoakie14 2 жыл бұрын

That was cool. I assume at auction good engine/ bad pump and bid accordingly. I have got an occasional one with good pump and needs carb clean for a good win. The problem here in Michigan is that people leave them in the garage and the water freezes in the pump because they don’t winterize the pump (or drain the carb). Down your way they might die of abuse at idle, in the northern states the cause of death tends to be lack of winterization. It is different if you are in Canada, then it is caused by a lack of winterisation. Nice job having the skill to recognize (or recognise ) the 3 leg pump being an acceptable repurpose for your own use.

@Chickanic 2 жыл бұрын

Thank you so much for watching!! Looking to support my channel? Find my Amazon Wish List Here! www.amazon.com/hz/wishlist/ls/G5FF73Q3T94D?ref_=wl_share

@my2be4me 2 жыл бұрын

Would be nice to spend 2 minutes opening the pump and show how it failed. Don't leave mysteries unsolved! Great channel, Merry Christmas and best wishes!

@maxwell6504 2 жыл бұрын

please make more of these type of videos. there is A LOT of good stuff youre hoarding behind the shop:P

@Chickanic 2 жыл бұрын

Will do! I am so tired of doing chainsaw videos, since that is all I am getting in to repair right now. Thanks for watching!

@rebeltaz123 2 жыл бұрын

As a fellow mechanic, I enjoy watching your videos as does my girlfriend who works with me in the shop , but... FOR THE LOVE OF GOD, WOMAN! Will you PLEASE put your hair up when you are starting engines!? We want to be able to KEEP watching and enjoying your videos for many years(?) to come! ✞ MERRY CHRISTMAS ✞

@inthebackyardwithdel438 2 жыл бұрын

nice fix , I seen an oppty in the boneyard I would like to have along with smoother stuff.

@OldtimeIronman 2 жыл бұрын

Subbed just because I admire your boldness

@andyjones6361 2 жыл бұрын

Great video ! You go girl!!

@SuperPaulbunyan 2 жыл бұрын

That’s awesome.

@Chickanic 2 жыл бұрын

Thanks J!

@terryholloway9930 2 жыл бұрын

Enjoyed it Ms Bree hope you and family had a merry Christmas

@james22939 2 жыл бұрын

This is so great

@ronkpaws1 2 жыл бұрын

Good job!

@eroomjennings 2 жыл бұрын

I would have cleaned it while disassembled if your planning to resell it!! I really like your helpful hints given in the shows I have watched of yours! I Volunter at a habitat store and we get many shoddy saws, mowers,blowers, etc that people have trashed mostly by leaving ethanol fuel in the carbs. Any way thanks!!

@Chickanic 2 жыл бұрын

Did you see the end of the video where I cleaned, it looked brand new and I said I had planned on keeping it?

@eroomjennings 2 жыл бұрын

@@Chickanic yes I did ! I wrote the note above while watching but prior to the cleaning!! Oops!!

@bentwedgestanleybrand5818 2 жыл бұрын

I have like 40 projects to do six riding lawn mowers. 20 push mowers. Chainsaws weed wackers. I'm going to be busy all winter long thank goodness, I have heat in myself work shop

@davidnelson6893 2 жыл бұрын

COOL

@redhawk4859 2 жыл бұрын

Another fine job. Keep up the good work

@delseckora5327 2 жыл бұрын

Great job as always. Merry Christmas yall

@Chickanic 2 жыл бұрын

Thanks Del!!! Marry Christmas to you!

@markr478 2 жыл бұрын

Well thats a win! good job 👍

@joegustin7158 2 жыл бұрын

Merry Christmas Chick

@nathanmattingly256 2 жыл бұрын

Keep up the good work

@larryrush150 2 жыл бұрын

Merry Christmas.

@cliffcowdell9760 2 жыл бұрын

Merry Christmas

@Herbybandit 2 жыл бұрын

Told ya there was treasure everywhere in that lot.

@oldmanfred8676 2 жыл бұрын

Dayum’ what a woman! Your Fans Love you Chickanic 🐣

@bentwedgestanleybrand5818 2 жыл бұрын

Merry Christmas everyone from your friends here in Piqua Ohio

@Monza62000 2 жыл бұрын

i use pump saver in mine for the winter ..a lot dont an they freeze an thats the end of them

@Ray-ks1xp 2 жыл бұрын

Merry Christmas 🎄

@Chickanic 2 жыл бұрын

Merry Christmas Ray!

@brianking1138 2 жыл бұрын

I was thinking that looks just like a Honda right as you said it 🤣. It looks like you have a ton of fixable stuff out there.

@macks7150 2 жыл бұрын

FYI there is no way you can tie something to keep the trigger compressed when you cant actually have your hand holding the wand from flailing everywhere, might be an inconvenience but its best to shut off and turn on only when needing to use it. Great video btw

@angryagain68 Жыл бұрын

"Simpson-stein". 👍

@barryhunt5357 2 жыл бұрын

I saw a lot of profit in the bone yard , Great save !!!!!!

@mikeadams2339 2 жыл бұрын

Been working on my Kohler 9.5 woodsplitter. Wont stay running. I will check to see if it had a filter on the tank? Thanks.

@OzMowersAustralia 2 жыл бұрын

Excellent work and yes the pumps are expensive here too in Australia 🇦🇺 Cheers from Toronto Lake Macquarie, David.

@dudekanic 2 жыл бұрын

My sister lives in South Australia. If the recent unpleasantness were to ever end, we may be able to get there for a couple weeks during the holidays.