Chihiros APP 2.0 Perfect Guide 2022 Tutorial & Error report /VIVID2 WRGB2 PRO wi-fiHUB

Рет қаралды 9,044

2 жыл бұрын

Chihiros APP 2.0 Perfect Guide 2022 Tutorial & Error report /VIVID2 WRGB2 PRO wi-fiHUB
it will work fine all product.If you follow the correct setup procedure
How to set sunrise and time off on mode on manual mode
How to use New My Chihiros 2.0
Wi-Fi HUB can be used if set up correctly
====
00:00 Introduction
00:50 Three new functions
01:50 Application installation
01:59 Smartphone settings
02:10 Delete settings (ver1.0)
02:30 Tank setting
02:56 Product registration
03:08 Firmware update (required)
03:30 Product name change
03:41 Timer program (auto mode)
05:20 Display bug 1
05:50 Manual mode (Kelvin adjustment)
06:52 Timer program (custom mode)
07:52 Creating a control group
08:52 Creating a scene mode
09:28 Chihiros DOCTOR (or MATE) settings
10:00 Display bug 2
10:14 Wi-Fi HUB (gateway) settings
11:00 Wi-Fi HUB operation check (without Bluetooth)
12:10 Wi-FI HUB disconnection
12:43 Summary
【Photographic Equipment】
Camera Sony a7c：
Lenzs Sony 28-200mm F2.8-5.6：
Lenzs Sony 17-28mm F2.8：
Lens2 kosina APO-LANTHAR 65mm F2.0：
MAMEN KM-D2 Pro：
Music :H.AK PerituneMaterial

Пікірлер: 29

@titojapsvlog1833 2 жыл бұрын

Sending you my full support keep it up

@garrjammm Жыл бұрын

Thank you!!! This is the only tutorial I could find that explained how to use the customize function. Great detail on all other parts of the app as well.

@kazuumi_takehara2 Жыл бұрын

Thanks for watching!

@tashakor59 Жыл бұрын

Finally. A proper tutorial for the app. Thanks.

@kazuumi_takehara2 Жыл бұрын

Thanks for watching!

@armandominguez3640 2 жыл бұрын

Nice tutoring fully explained

@melvansinio8390 2 жыл бұрын

Very helpful! Thank you!

@kazuumi_takehara2 2 жыл бұрын

thaks for your watching!

@donamrazuegnim1356 2 жыл бұрын

Sending you my full support keep it up more power to your channel

@kazuumi_takehara2 Жыл бұрын

Thanks for watching & support!

@mohammadirfan1698 2 жыл бұрын

Brilliant. It's a very helpful video. Thanks my friend

@kazuumi_takehara2 2 жыл бұрын

Please subscribe and comment again :) Thank you

@Highlaw Жыл бұрын

Thanks so much! I still have 2 questions about Doctor though: 1. Can you set a timer function? (Example: 1H per day) 2. Can you set modes to change automatically? (Example: Plants on Monday, Shrimp on Tuesday, Fish on Friday, etc)

@kazuumi_takehara2 Жыл бұрын

Thank you for watching. DOCTOR does not have a timer function Can't switch modes automatically When actually using it, the type of bubbles does not change depending on the mode, and the generation time and generation interval seem to differ. However, I haven't noticed any difference in effectiveness. I think fish mode is fine for everything.

@user-wp2gs5ys7s Жыл бұрын

Thank you! Very informative and much appreciated. I hope you do not mind me asking you, but, what make of co2 diffuser were you using in that aquarium?

@kazuumi_takehara2 Жыл бұрын

I am glad your coments I use this diffuser in this website kapuraaqua.com/

@user-wp2gs5ys7s Жыл бұрын

Thank you so much for the reply. Keep making those educational videos. They are so helpful. @@kazuumi_takehara2

@welovedrift6116 Ай бұрын

How to make colorful sunsets and sunrises in this application in custom mode?

@duroncanto6378 2 жыл бұрын

Thanks for the video. Very shame that we cannot modify in Custom Les Kelvin mode. Start with 3500K -> then at 6700K -> Finish at the end of the day 3500K then extinguished. I find the custom option totally useless, it's a shame, there is a big potential, if only the programmer want to get started :)

@kazuumi_takehara2 2 жыл бұрын

Thanks for watching. Since the Kelvin setting is no longer available, I need to make a note of the RGB percentage on paper. Also, WRGB2 PRO will be difficult to implement Kelvin.

@sammydendoncker3980 4 ай бұрын

I mean how hard can it be for the programmers to make it more intuitive. I found it verry confusing to set a manual program

@MrMavhen 2 жыл бұрын

do you experience bluetooth connection always failed to connect? Need to re-open few times the app with close distance to the actual light

@kazuumi_takehara2 2 жыл бұрын

yes, I have. Recent models (after 2021) have stronger Bluetooth signals. You can connect even if you are a little far away. Older models have weak Bluetooth signals and have experienced some time to establish communication. Also, if the connection does not continue, turn off the light once, turn it on again, and restart the application to solve it. please try it. Thanks for your comment

@MrMavhen 2 жыл бұрын

@@kazuumi_takehara2 thank you. Because when I got home at night yesterday, my light is off and never auto on base on what I set on timer. Then I cannot connect on bluetooth already. So I turn on/off the power and re-open the app again and finally I can control the light. So I need to check again later at night if it will auto on base on what I set. Hopefully it works (if not then this is a failed item for me). But bluetooth connectivity is very poor, when I'm on my room cannot reach the signal and need to come out and be close to the light to be able to control. Very inconvinient. I don't know about the smart wifi hub if it is much more worst than bluetooth or much better.

@kazuumi_takehara2 2 жыл бұрын

@@MrMavhen Chihiro's light resets the timer function when the power is momentarily turned off. It can be prevented by connecting to a stable power supply. Do you use an outlet with a timer function? The power supply is not stable. It is stable by sticking it directly into the outlet on the wall of the house. Chihiro does not have an internal battery. That is the cause of instability.

@kazuumi_takehara2 2 жыл бұрын

The combination of Wi-Fi hub and Bluetooth connection is very incompatible. I have a wifi hub, but I haven't turned it on. When the power is turned off, Chihiro's light will be reset. However, there is a possibility that the timer will not work due to a defective Bluetooth controller. First, let's disconnect the Wi-Fi hub.

@Agcz1213 7 ай бұрын

Hi, facing the same issue, recently there have been lot of power cuts due to which the app resets the timer and never turn on or off after power outage. can this issue be solved using the wifi hub? since the wifi can access internet and reset the clock using it?@@kazuumi_takehara2