i think i did too

SneakyZeke I can't believe it's slower than shitty Grom...

well it's geared for acceleration and off roading. i could gear it for top speed but then it's kind of useless as a dirtbike

SneakyZeke Thanks brooo..

is it road legal as long as you have a motorcycle liscence?

you know it

69 likes nice

Lmao

@@armedlennie590 99 now in 2023

😂😂😭😭

Most days I don’t

@@SneakyZeke most?

thanks i thought it was catchy

Hello

Thanks

do you giveaway things

approximately 27milesperhour

i'm doing a giveaway soon, hopefully in the next couple months

close!

I say 35mph tops with stock gearing and 50-55mph with 16/30 sprockets

@@eamh2002 Even the Chinese 125's hit 48 stock.

55 60

@@bjgaming15k26 Even stock 125 Chinese hit 55. These things could hit 70 on a straight road.

Just add bigger front sprocket and smaller rear, you can hear it over revving like 3k rpm more than the top HP rpm's :)

eamh2002 and get a better carb

Increase two teeth on the front sprocket. Then you're done

was it a 2 stroke

@@bjrey7106 2 stroke isn’t any faster then a 4 stroke. Matter of fact 4 stroke has a faster top speed due to them running in lower rpm.

Its the exact opposite, 2 strokes rev higher, which = more top speed, also, 2 strokes haver better top end than 4 strokes.@@WrenchesnWenches

Stator?

awesome thanks for checking it out!

nice, that must be a scary ride. and thanks

Yea it is lol & I like it lol

I doubt it buddy there is no way

@@Freshkeeper-xu4ow My friend has one but it only goes 40 mph so 50 would be crazy

I don’t remember if there was any wind, the road might have been tilted more though

probably ;)

Are yall in the mitten?

I have the same bike it goes over 90 km/h 😅

You serious and have you seen that thing go 58

@@sanesaint8725 dude I've seen it go way past 😯

that's a great question, i know i could use a lot of new parts, but i'm really struggling to find them. I had to make my own clutch cable out of some other motorcycle cables and parts. I'm a not sure how long the throttle cable has to be, and if i find a good website i'll let you know!

Ok thanks!

look up harwin powersprts in houston texas they ship parts for them

The clutch cable was it hard to install and also would it start with out the cable if in neutral

It’s a copy of a Honda cg125 engine, so a cg125 cable will fit. If it’s 14” front and 12” rear wheel it’s more than likely to be a copy of a crf most of these Chinese bikes are pretty generic so parts are interchangeable. I’m going to get new plastics for mine( it’s a 150 as well) found them on eBay for between £10-30 , cheapest is from China but its longer waiting time

thanks!

I’m not using the clutch because it’s fun and I don’t really care about the damage

It is because he is ritch

SneakyZeke XD sounds good when you shift like that too lol, (between us it was engaging race Mode)

It's most likly semi auto like..post pit bikes are

What’s the back sprocket size

19 front? 😂 ok dude biggest you can fit on front is 18 and that’s pushing it

it's a possibility

It’s a marshin 150cc bike

What is making them vibrate? I have a 150 and the handle bars vibrate bad when I get close to top speed. Maybe it is the dirt tires on pavement?

@Charles Moore thats waasup. Rear brakes drum or disc?

Disc baby. Getting one tomorrow for 100$. Maybe.

@@nateball-ri9nb thats dope. Im still rebuilding cant wait to ride again....been looking for a cheap little pit bike just to putt around....

maxhall88 install a sprocket with less teeth for that extra bit of speed it won’t top out so quick

she hauls for alittle bike with a fat guy on her

It was my Honda cb900 before it was finished

The clutch cable was on it’s last legs so I was trying to make it last alittle longer. It’s also faster and not bad for a little bike like that

I was 240 at the time haha, the bike wasn't thrilled but it did alright

Don’t need it haha

ah ok

SneakyZeke i have question on this dirtbike. so do need to use the clutch to shift gears?

Take your L no you don't, but I use it anyway

Shut the fuck up

that’s what this bike is?

it has a clutch i'm just too lazy to use it

SneakyZeke bro wtf

No just not using the clutch

i have no idea

i bought it half a year ago, and have done nothing besides changing the oil

I got a vipor 150 in Houston and it was very inexpensive and all I've done was change oil been going strong for almost a year starts on 3 or 4 th kick and gets ran pretty hard

I got a vipor 150 in Houston and it was very inexpensive and all I've done was change oil been going strong for almost a year starts on 3 or 4 th kick and gets ran pretty hard

I got a vipor 150 in Houston and it was very inexpensive and all I've done was change oil been going strong for almost a year starts on 3 or 4 th kick and gets ran pretty hard.

I got a vipor 150 in Houston and it was very inexpensive and all I've done was change oil been going strong for almost a year starts on 3 or 4 th kick and gets ran pretty hard.

I usually do. You don’t really have to if you want to shave some time off your acceleration

@@SneakyZeke That ''time saving'' will be added up for a new clutch later on (y)

It’s a 300 dollar Chinese dirtbike. You can drive your own bike however you want

If you find it on Craigslist, like 300$

thanks!

I have no idea what was done to it before I got it, it is a 150 though

SneakyZeke here in Uruguay and Argentina is a very popular bike because is cheap and they are pretty good

It’s a marshin 150cc dirtbike

Don’t need to amigo

1 down 4 up I think

carter Achelpohl what do u have

If its anything like a kx85 or cr85 those things can hit around 80

For the price, they’re great bikes. They’re not as quality as brand name, but they’re reliable, powerful, and a lot of fun

SneakyZeke ok thx

No it was a marshin 150cc

Ok

It’s was adjusted that high for a reason, and I don’t feel like using the clutch when I don’t have too haha

Don’t need to

People dont typically shift on straight aways

Close

It's a semi auto

Darn Chinesium technology

Damn that's fast, must be terrifying so close to the ground :D

nice guess

no