Yea, They installed really easily. I HIGHLY recommend them for anyone who has a Chinese ATV, as they all have a narrow rear end unfortunately.

Liam Conole What year Coolster do you have? I got my boy a 2017 Coolster 125cc and it’s a 3-Lug hub and all these KZfaq videos show all Chinese atvs having 4 lug hubs just wondering if you guys switched them out?

with minor upgrades they work just fine IMO. the carb is probably the best i have found if i had to rank them...them most probs come from the carb. use non ethanol fuel (dont try me on this one) , and if you get the mukini carb , get the cable also...it fits waaaay better than trying to retrofit it. the shocks are amazing as well.

@@Carolinakeith_1 thanks man I will try it out I’ve been looking at the Pentora 250 cc

@@user-vi1os8of8p same as tao tao . 250 has bigger shocks, so measure them first before ordering. carb also is bigger

You can change the hubs out for 4 lug ones. Just do a little searching for parts, or find a junk one with 4 lug wheels and hubs!

Can also replace the whole axle with a longer one and achieve the same results.

Ubaldo Rubio whygostock has your spacers

We rode them 2 days ago, I think I'm going to do a comparison video with them on how much better it rides and drives with the minor upgrades!

Question for you. I am waiting on response from the seller of the shocks but will ask you the same question. The shocks came with 12mm eyelets installed and came with 2 x 10mm eyelets. All four bolts are 10mm did you source extra eyelets, use 12mm bolts for two of the mounts or did you just say o well.. and put the 10mm in the 12mm eyelet?

The eyelet sleeve was easily removable and slid right out for me, so I was able to use the correct one. If it doesn't come with it, i would just go to a hardware store with the bolt you want to use, and ask for the correct eyelet sleeve. Wont be more than a couple $ for it.

MJKL Speedwerks yep, I was able to slide out the 12mm and put the 10mm in for one side. I wanted to test them so I left the other side as is. I’ll go to the hardware store this weekend if the seller doesn’t send me a set.

@@GrowYourOwnFun good day how can I get one of these motorcycles ATV

Wheel spacers, no...it came with them. For the carburetor I used the original hardware.

Yes, many have said the same...check the bushings where the engine connects to the frame. Occasionally the rubber breaks free and vibration enues

You need to use the rounded lugs to center the wheel spacer to the hub. Use the bolts and nuts to secure the wheen to the spacer.

Doesn't need to be, use the rounded nose lugs to center the spacers on the hub, and the bolts/nuts to attach the wheel. The hubs change size from year to year sometimes without warning. I didnt have to machine anything.

I like the way you think! The frames aren't the problem on these little quads, its the little stuff where they cut a lot of corners. Should be an animal!

@@Carolinakeith_1 yeah, me and my bud are going to make it work over the next year or so hopefully

Absolutely! Just remember to use the light nuts that come with the kit to center the wheel spacers on the hub, and use the ones you already have to bolt the wheels to the spacers. The nuts in the kit are conical on the end like a car lug nuts. Ask if you need anything else! www.ebay.com/p/Freedom-County-ATV-Fc11020s-Wheel-Spacer/7016444902?iid=142915745876&chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=142915745876&targetid=541454147172&device=m&mktype=pla&googleloc=9010455&poi=&campaignid=1881303766&mkgroupid=70056983957&rlsatarget=aud-496202329659:pla-541454147172&abcId=1139336&merchantid=114170263&gclid=Cj0KCQjw4s7qBRCzARIsAImcAxZVotQwc6CXG0dKPLWCH6brA_So-neNdPZV1gNpLUN1z2ygVenz7pUaAofWEALw_wcB

And if you would, subscribe, hit the bell, and share please! Thanks!

Also, the bolt pattern is 4x110!

Lots of places are. Just Google "atv wheel spacers" with a similar offset that i ordered. The pic of the box has the dimensions of what I ordered

2017 Tao Tao 125cc. They are all kinda the same drivetrain wise, some minor differences here and there. Look back thru the series, and follow along! More vids will be coming soon!

amazon and ebay is where i bought almost everything

Thank you and your videos are awesome man I like your work and details

@@josephross7630 thank you, glad you enjoyed!

@@Carolinakeith_1 can you tell me what spacers I need to get for my 3150cxc I can't find them on amazon

Safer wholesale has them or you can find them for sale on Facebook market place or OfferUp or Craigslist

For both

Its 2 bolts...I lost video...its the exact same procedure as the rear shock, same bolt sizes and everything. That video is later in the series. Thanks for your input!!

And if you're referring to wheel spacers...I mean its a piece of metal with 4 holes...🤷‍♂️

@@Carolinakeith_1 i know. wasnt being ignorant to you. but my hub has threaded holes and the spacer bolts didnt just slide in. i kinda had to reverse things. just saying the average person with no experience might have wanted to see it done. but i guess if they had enough sense to buy spacers they should have enough sense to install them. no harm meant.