We race the Revo Porsche GT2 class . Only things we can do is wood guide . Optional to change the pinion and spur gear to plafit in the same ratio 12/33 ,change the tires to any Revo compound for the normal or wide wheels and glue and true the tires . Awsome running cars .

We have a HOST Race next weekend. We have 3 Classes each Race (monthly). We have limited pit space so we are asked to keep it reasonable. For Christine and I, I bring a min of 2 cars per race per person. So 12 cars are ready on raceway! And Chris and I like similar set-ups! I still tear my hair out. Group C is the worst@ I love those cars.....I have SO many choices.

HAPPY SATURDAY MARTY read all the comments. Nothing I can add. Hooked on speed.....glad to see alot of happenin going on .....have fun...

My 1/32 analog club races Revos regularly, and hands down the preferred car is the Marcos. Ugly as it is, it's as low as a Thunderslot Can-Am with the shortest wheelbase of any Revo. The Marcos cars out-perform everything else.

Marty: Caveat, I have never competitively raced any of my multiple Revoslots. Like you I just time trial them at home. I have found that spacers under axle holders lowering the car to 1 mm and some tire tweet oil treatment polishing and softening the rear have been my 2 significant valvations of note to offer you.

Hi Marty, unfortunately I havent done enough tuning to help you out, but the reverse is awesome. I always learn something watching your videos and reading all the comments Thanks for sharing

Good morning early bird ,brother Marty , having my coffee always enjoying info and learning myself. Thanks for the show buddy ,heading to worship practice ☝️🙌😊God bless have a great weekend.🏎️🏎️🏎️🏎️🏎️🏎️

I think you should race the CLK that I know you're going to buy!

The fastest car is always the choice. I do all the basic tuning etc but I always throw on new BOBKAT tires for club racing. Nice track btw! 🏎🏎🏎

Always great to see how folk prepare their cars for racing 🏁 👍

I have both of those revos and I would go with the 333. The tape really helps quiet them down. Nice set up🤜

Good morning Marty. In terms of the braids on your Porsche 911 a brass-brush is pretty usefull to comb the braids to clean them up. Pull the brush towards the rear. A drop of oil onto the braids would also help cleaning them from time to time. But just a small drop though. I use Ballistol for that. The oil will help cleaning the track-rails that way , as well. The 911 is pretty tail-happy im the curves, so maybe a little extra weight behind the rear-axxle could help in that case. Try it out. If not, improove your driving skills with it. Means slow down a bit with it inseide the curves. Also a different guide-keel could help. Frankenslot and Slotinvasion do have those as spare-parts. I prefer the Frankenslot guide-keels. They are good and i don`t have any experience with the Slotinvasion ones. It is a try out thing. Have a nice Saturday and a fine 1 Advent tomorrow. :-)

Take both of them with you, drive them both during warm up and decide at the track. Basically I would use the F333SP

Great content Marty - Ian and I just purchased our first BRM and are looking forward to getting into this tuning / tinkering and fettering game.

Great vid, good info. Thank you, have a good one. Slot cars for life!

G'day Marty this sounds crazy some cars handle tracks a bit different which is odd . My problem was I moved the weight ratio around the car handle great

Hi Marty, yes, I think deslotting settles it. The Ferrari is wider and has a lower centre of gravity than the Porsche. Maybe swap the motors out if the Porsche seems a bit quicker?

That close, I’d go for the one that stays in the slot. Can’t win if you ain’t runnin’! That Porsche sound super smooth though! Maybe adjust the controller a bit for the Porsche when you are on Bruce’s track. Never added weight to a Revoslot yet. Maybe bevel the tires on the 911 a bit?

Hi Marty again I use Slot It copper braids much softer and better My opinion all the best to the race

Hi Marty... I have both of those cars. Very close. I found the Porsche had less tail wag

The edges of the tires on the 911 look squared off so maybe sand a slight radius on them and test again. Thursdays this month at Cincyslots should be interesting! See you there.

Both are beauties! But I always choose Ferrari 😅

Saturday Morning Coffee with Marty! The Porsche also seemed to be a little more tail happy through the corners. The only extra thing I do is apply a little Slick 7 Voodoo lube (which I believe you use too) to the braids for a better contact to the rails. Another great video. Thank you Marty!

Morning Marty, another great video

Gas On !

Marty, Is that tape under the brass nuts? Electrical tape? Btw, SlotRs fastest Revo has been the Respol Porsche. Good luck racing!

Hi Marty I have on my Revoslot cars put 2 g in the front close to the guide taking the spring what a difference

Actually I have a question, is the track in the video carrera 132 digital? Where can I buy the vehicle in the video?