Author Valery Samovich.
Making the angle of "lower bowl" in the traditional Russian technology.
Lower bowl - this is the most common type of corner notching on the height of wooden architecture in Russia.
If you decide to make a frame for a bath, cottage or house for himself, with his own hands, the Russian logging because of its simplicity, rationality and reliability - is the best solution.
The main process steps of manufacturing the bottom of the bowl:
00:58 Before marking vials's get the log in the same way as it lay at the marking of the longitudinal groove.
2:41 expose the features of the solution.
3:07 Marking the value of planting timber and stёsyvanie schёchek.
3:49 Marking scriber bowls.
5:08 Marking the top of a hidden spike (fat tail).
5:28 We cut down the cup to the top of the spike.
6:47 Final dorubka done with an ax. Thus zatyukivayutsya wood fibers, that is clogged, which significantly reduces the water absorption of timber logs.
7:50 Layout hiding spike.
9:36 Final cutting of the bowl.
13:49 Layout and Grooves under the rump.
18:01 Planting timber after fitting.
18:45 Laying seal on the timber (moss).
21:18 Pre konopatka.
www.srub-banya.com/content.php...
Site "Log cabin Bath Furnace" www.srub-banya.com
KZfaq Channel "Valery Samovich" / @user-jg5dx1rd1v
Playlist "Wooden porch for a bath" • Деревянное крылечко из...
Playlist "Log cabin with his own hands" • Какая чаша лучше, вер...
Playlist "tools of a carpenter and not only ..." • Самодельное тесло
Valery Samovich.
December 2014.