#ROLLERCRIMPER #tillage #agriculture #choppingroller #rollerchopper #frameroller #rollerchopper
An overview of one of our models of SHREDDER chopping rollers.
The Shredder TL63.470W crop residue shredder roller is framed, single-row with a drum diameter of 470 mm and a working width of 6.3 meters.
The main feature of this model is that it was designed with the ability to work on the front hitch of a tractor.
More videos about the chopper roller: • Каток подрібнювач Shre...
Video on the competition following the results of which we will give a chopping rink: • Розіграш! Аверс-Агро д...
Link to our official website: avers-agro.com.ua/en/shredders
We are on Facebook: / aversagro
Call us: +38 (097) 7-444-999
Features of the use of chopper rollers:
✅ The roller shredder of sunflower plant residues can be with a drum diameter of 470 mm, this diameter is enough to grind sunflower residues into a fraction of 5-12 cm.
✅The corn shredder roller must have a more massive design with a drum diameter of 550 mm or 880 mm. The stalk of corn has a more rigid and dense structure, so the mass of a standard roller may not be enough.
✅Many farmers use the chopper roller as a unit for vertical processing. If you make two passes diagonally, then the soil is loosened to a depth of up to 5 cm, which is quite enough to sow winter crops. This method significantly reduces fuel costs and reduces the time of pre-sowing field preparation.
❗ Chipping rollers choppers from Avers-Agro have a number of advantages and author's developments that you will not find from other manufacturers:
The fan arrangement of the knives increases the load of the drum on each knife, at the same time only one knife of the drum interacts with the soil, which allows you to effectively grind crop residues. It also reduces the shock load on the bearings, allowing the roller to move more smoothly across the field and be aggregated with tractors from 60 hp.
✅Floating frame. The frame of the chopper roller is designed in such a way that both wings work both up and down. Thus, during the operation of the roller, the soil relief is repeated and uncultivated areas of the field will be excluded.
✅ Frame drum. Designed in such a way that there is space between the knives and the shaft. Thanks to this gap, during the operation of the chopping roller, the earth will not stick between the knives and the drums are cleaned independently.
✅Fully collapsible drum. The chopper roller drum has a collapsible design, which makes it easy to repair and replace elements.
The knives are sharpened by milling at a certain angle and have a heat-treated cutting edge, which allows you to effectively grind plant residues and extend the service life. During operation, the knives sharpen themselves.