Chris gives us a Wiring Tutorial for the Whelen Freedom Rota-Beam

No video

Chris gives us a Wiring Tutorial for the Whelen Freedom Rota-Beam

Рет қаралды 95,612

Күн бұрын

sirennet.com/wh... The Whelen Freedom Rota-Beam Series Lightbar is a "Cutting Edge" version of the Freedom Lightbar that is built using the new Rota Beam modules. The Rota-Beam module is designed to imitate the classic rotator effect without the maintenance problems and high current demands of motors and halogen lights. The Freedom Rota-Beam Series Lightbar is built on the same Rugged extruded aluminum I-Beam construction of standard Freedom lightbars.
Features:
Base configuration includes 4 Rota-Beam corner modules.
Add up to 5 Rota-Beam inboard modules, 2 Front and 3 Rear, or 3 Front and 2 Rear.
400 series modules may also be added to your configuration where space is available.
Build your lightbar in any color combination with take-downs and LED modules in any position you want.
Takedowns and alleys can be single or dual LR11 modules.
Clear outer lenses are standard.
Available with Scan-Lock flash pattern control that lets you toggle through the multiple flash patterns and lock in the pattern you select.
Every pair of lights can have its own unique pattern.
Rugged extruded aluminum I-Beam construction.
All models meet or exceed SAE Class 1 and California Title XIII requirements.
External control cable included.
15 foot cable, passenger side exit.
Standard Lengths: 44", 50", 55", 60", 72".
Size: 3-3/4" (95mm) H x 12" (304mm) W.
Whelen Five Year HDP (Heavy-Duty Professional) Warranty on LEDs

Пікірлер: 42

@Guillotines_For_Globalists 9 жыл бұрын

It would be great if the rotabeam modules were not synced with each other, or at the very least, alternated the rotating pattern so that both sides were not "dark" at the same time.

@SIRENNET 9 жыл бұрын

Blaine Bugaski Using the Scan-Lock trigger wire, you can adjust the Modules so that the patterns are different from one another.

@Guillotines_For_Globalists 9 жыл бұрын

Very cool, that would help to "randomize" the pattern and allow for less dark time.

@DynoDieselWagon 4 жыл бұрын

SICK TECHNOLOGY

@brandonh5201 8 жыл бұрын

If I added one of these to our squad cars I'd have it like the federal signal Aerodynic lightbar with three rotaters in the middle on each end and one set of modual a on the corners to make for the flashers the Aerodynic had and have it red/blue and the back modual she amber. I think it would nice and have the old fashioned look. :)

@johndirenzo2193 9 жыл бұрын

Can the rota beam module be installed into an Edge 9000?

@JoshDeutschOfficial 6 жыл бұрын

John DiRenzo , u probably can, but you would need to get new everything for the edge 9000 from strobe light to led

@firefighter7752 10 жыл бұрын

Please give us a tutorial on how to wire uo a siren with restrictors so you can use it with a smaller speaker for indoor use

@terryclay8738 6 ай бұрын

Where can I find a wiring schematic for a Code 3 RX2700? I'm replacing a cable that got burned and it's being connected to a Whelen CenCom Gold controller. I also need guidence on how to wire the cable to the controller connector. All the LED modules have been replaced.

@SIRENNET 6 ай бұрын

Please visit this link to Code 3's site. Here you can download Installation Instructions that includes the RX2700. www.code3esg.com/us/en/products/lightbars/single-level/rx2700

@SIRENNET 6 ай бұрын

Do you have any pictures of the controller connector that you can review?

@natedawg809 10 жыл бұрын

The rear lins, can they be changed to S/T/T lights?

@SIRENNET 10 жыл бұрын

If you were to add an additional wiring harness that operated the S/T/T specifically, then yes, it can be set-up that way. Out of the Box, the Rota-Beam Freedom is not designed to operate Brake/Tail/Turn lights.

@natedawg809 10 жыл бұрын

Was wondering since I may purchase one for a plow vehicle, but wanted S/T/T on the Roto-beam. Thanks for the response. :)

@valrabellkeys9867 7 жыл бұрын

Are you using a car battery charger to power that bar? I use one for my Vista but when I'm connecting the hot to the wires it makes sparks and smells like burning a bit - though it powers the lightbar. How do you guys avoid sparks upon contact? The sparks stop once it's fully connected.

@SIRENNET 7 жыл бұрын

We use regulated power converters. They take a conventional AC current and drop it to a regulated 11-16 volt DC output. They are designed to protect from over and under voltage as well.

@TempoDrift1480 Жыл бұрын

You use a switch box/controller of some sort and make sure all the switches are off and there is no current being drawn when you are hooking it up. There is no getting around sparks but they happen inside the switches and thus you don't see them.

@valrabellkeys9867 Жыл бұрын

@@TempoDrift1480 I was 15 or 16 when I wrote this and work on electronics for a living now. Though I appreciate the reply.

@natedawg809 8 жыл бұрын

is there a stt function available?

@SIRENNET 8 жыл бұрын

A set of Brake/Tail/Turn Modules can be installed in the rear of the current Freedom IV Rota Beam.

@donnydonowitz8679 8 жыл бұрын

SIRENNET what would a ball park price for a Mini Freedom IV Rota-Beam SuperLED series with a "Rotor" on both ends in a amber/white setup. "As in what the stock picture on your website of this item looks like" Thanks!

@joemedvec2248 5 жыл бұрын

Chris. I have been messing with light bar at work for street department. I got all the lights to work. Except for slide switch to run the flashers. If i touch the blue wire to the slide switch they will turn on. So seems like it not getting power to slide switch. It is driving me crazy. I replaced control board and same thing happened. Any ideas would help. Thanks. I don’t know much about this. Our mechanic retired so I’m just trying to help city save on spendings. I don’t know if he disconnected something some where or what

@SIRENNET 5 жыл бұрын

Mind giving us a call at (888) 959-0911? Please ask for Chris, he'll try and help get this taken care of with you :)

@thunderbear0 6 жыл бұрын

I love wig wag

@brandonh5201 8 жыл бұрын

What's the between the whelen freedom rota beem and the federal signal navigator? Sense they both have rotaters.

@SIRENNET 8 жыл бұрын

There are many, many differences between these 2 leading platforms. If you'd like, please give our Tech. Department a call at (888) 959-0911. They can go over all the details with you. Thank You.

@brandonh5201 8 жыл бұрын

+SIRENNET ok thanks.

@jesterflight8593 3 жыл бұрын

Why didn’t he turn on the entire light bar?

@publicsafetylightsaustrali8590 10 жыл бұрын

Started making the bars thin, now going backwards & making them fatter again, seems a lot of wasted space these new roto beams, be great as a beacon or minibar maby !?

@mikel9567 9 жыл бұрын

Public Safety Lights Australia Many departments prefer the rotating look. This design is to appeal to those departments while giving them the benefits of LED with no moving parts (unlike the PowerArc or Federal Signal models that use moving parts).

@publicsafetylightsaustrali8590 9 жыл бұрын

Mike L I like the look of them & funton

@mikel9567 9 жыл бұрын

Public Safety Lights Australia Me too. If you like these Roto beams you should see the other lightbar they come in which is the Delta bar. Sirennet has a video up of that one too. It is insane.

@roywadsworth7307 5 жыл бұрын

where can I locate this light bar (edge freedom rota beam iv

@SIRENNET 5 жыл бұрын

The one we're showing here as given way to the Freedom IV Rota-Beam. www.whelen.com/auto/product?head_id=4&cat_id=173&prod_id=724 It's a very customizable platform. If you have questions or would like to see what pricing ranges, please let us know. Sales can be reached at (888) 959-0911 or through email at: info@sirennet.com