Lian Li O11 Vision Build - Step by Step Guide

Рет қаралды 50,106

Күн бұрын

A full step by step guide to building a PC in the Lian Li O11 Vision. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
00:00 The Parts
01:25 Preparing the Case
13:40 CPU Installation
12:47 CPU Cooler Bracket Installation
14:12 M.2 SSD Installation
15:11 RAM Installation
15:29 CPU Cooler Bracket Installation
16:02 Motherboard Installation
16:50 Case Cable Installation
17:49 Power Supply Installation
19:40 CPU Cooler Installation
26:51 Case Fan Installation
30:11 Graphics Card Installation
31:44 Cable Management
32:49 Complete Build Footage
33:37 Outro
Parts used in the build (Amazon links are Affiliates Links)
• Lian Li O11 Vision
UK - overclockers.co.uk/lp/lian-li...
US - www.newegg.com/p/2AM-000Z-000...
CA - COMING SOON
• ASRock Phantom Gaming Z790 Riptide WiFi
UK - www.newegg.com/global/uk-en/p...
US - www.newegg.com/p/N82E16813162149
CA - COMING SOON
• Intel Core i9 14900K
UK - amzn.to/46GuSvD
US - amzn.to/3QEI8eQ
CA - amzn.to/3QzznCG
• Lian Li Galahad II Trinity Performance 360
UK - www.overclockers.co.uk/lian-l...
US - amzn.to/4633sip
CA - amzn.to/3SsKCOK
• TEAMGROUP T-Force Delta RGB DDR5 32GB Kit (2x16GB) 6000MHz FF3D532G6000HC30DC01
UK - amzn.to/3REE7aW
US - amzn.to/46pnK6q
CA - amzn.to/48uvaXE
• Lexar NM790 2TB
UK - amzn.to/457Bh2k
US - amzn.to/3s3Qgvl
CA - amzn.to/43X0bjL
Thermaltake Toughpower PF3 1200W
• UK - amzn.to/3PECirP
• US - amzn.to/3EZJhqI
• CA - amzn.to/3F1ynAF
• Gigabyte Aorus GeForce RTX 4070 MASTER
UK - amzn.to/426Cbds
US - amzn.to/3Vwz3Wh
CA - amzn.to/3Ll6Tc5
• Lian Li Uni Fans AL120 V2 Triple Fan Pack
UK - amzn.to/3tYMtAu
US - amzn.to/3QsRQzD
CA - amzn.to/3MpYC7J
• Lian Li Uni Fans AL120 V2 Single Fan
UK - amzn.to/3stHCXv
US - amzn.to/3SugJ0s
CA - amzn.to/3MuBdCj
• Gelid Solutions GC-Extreme Thermal Paste
UK - amzn.to/3tzlnwT
US - amzn.to/3mM8Sdm
CA - amzn.to/3xp1n0Z
• Maidesite Standing Desk S2 Pro Plus - shrsl.com/3wwme
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
More photographs of the build can be seen at pcpartpicker.com/b/GDF8TW a time-lapse of the build can be seen at • Lian Li O11 Vision Build and the case review at • Lian Li O11 Vision Review
Useful Links
• How to make a Windows 11 Bootable USB - • How to Make a Windows ...
• ASUS TUF Gaming GT502 Build - Step by Step Guide - • ASUS TUF Gaming GT502 ...
• Motherboard Drivers - pg.asrock.com/mb/Intel/Z790%2...
• NVIDIA Drivers - www.nvidia.co.uk/Download/ind...
• ASRock Phantom Gaming Z790 Riptide WiFi Overview - • ASRock Phantom Gaming ...
• GIGABYTE Control Center - www.gigabyte.com/Graphics-Car...
• Lian Li L-Connect3 - lian-li.com/l-connect3/
• Lian Li Galahad II Trinity Performance Review & Installation Guide - • Lian Li Galahad II Tri...
Music
Arcadewave - LUPUS NOCTE
www.epidemicsound.com/track/e...
#pcbuild #lianli #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc

Пікірлер: 105

@lewerewoof 3 ай бұрын

Dude, thank you so freaking much for this video because those components are nearly the same I have now and I was really strugglign with the fan assembly planning. I wasnt expecting a whole walkthrough of assembly but im glad you did provide one since this will be my first PC. Thank you, you absolute godsend

@Ordinary-Knowledge Ай бұрын

I’m so glad that you have a build video for both the pcs I’m making. Helps out a ton honestly

@dm8264 5 ай бұрын

Love your walkthroughs, and, let's be honest: that montage song at the end was👌🏼absolutely stellar!

@sidesw1pe 3 ай бұрын

Thanks for all the time and effort you spent putting together this video, I found it extremely useful.

@ericw.3149 27 күн бұрын

Awesome breakdown of this case and straight to the point. Couldn't find a better video, thanks! Bought a white case and currently following your guide for my build. I subscribed.

@normanosland8693 6 ай бұрын

from when I saw this first peek of this case I wanted it, even though I had just purchased the NV7 - and a combination of the superbness of the NV7 and the slow time that Lian-Li took to get the Vision to market cooled my eagerness to 'meh, I like what I have' - after seeing your informative review I am going to swerve it - thanks as always Chris

@ciaomyweak9681 17 сағат бұрын

Thanks man very helpful! Great camera and editing skills, bravo!! Just build mine thanks to you!

@frankt1550 4 ай бұрын

Excellent video. Great job explaining everything. Thank you.

@mattp1680 6 ай бұрын

Really is a beautiful looking case, I currently have an 011 Evo so think I'd miss the extra space up top for my 360 rad tbh. Wish Lian Li would make a seamless glass front and side panel for the Evo, I'd buy that in a heartbeat, maybe the next gen 011's will have that. Great video as always 👍

@bschuler 6 ай бұрын

Have a feeling the designers of this case watched this, and went.. wow.. I didn't even know you could do that, lol. You missed nothing and gave every bit of info one could ever want on how to assemble this case. Well done. Please be so kind as to consider doing this for the Lian LI RGB when it comes out. That is the case I really want and to know every single detail of it, like I do now of the Vision, would be wornderful. Well done.

@rom35w 6 ай бұрын

Gorgeous and cheap case, thank you for the review !

@ChristopherFlannigan 6 ай бұрын

No problem 👍

@sensasianone_battlestation2433 3 ай бұрын

Building in the 011 Vision Chrome this week, nice breakdown. Got a sub from me

@apple.9074 4 ай бұрын

Fantastic video

@eycoregamer7143 6 ай бұрын

A beautiful case!

@ChristopherFlannigan 6 ай бұрын

Sure is

@cardiffdevil82 3 ай бұрын

Awesome thanks.

@imliimits3530 6 ай бұрын

This case has so much for only 130 quid it’s mad lian li are killing it

@ericbyun9846 6 ай бұрын

Do you think that air cooling would work in this case? I'm worried due to lack of top fans.

@JimONeill 3 ай бұрын

Shouldn't the radiator where the tubes connect be at an orientation higher than the pump?

@sensasianone_battlestation2433 3 ай бұрын

Yes it should

@ceefok 20 күн бұрын

Thank you!!!! I noticed it, and it was driving me nuts.... also that way the tubes also wont be pushing down on the GPU which also drove me crazy.

@brisson28 6 ай бұрын

I would like to know what is the torque specs for the pump on the cpu because i heard that if you tight them too much it's not good and it can bend pins on the motherboard for the cpu. Like how much turn you need to do? Until it stops?

@franzhizon9112 2 ай бұрын

Brother. Can you suggest fan rpm settings for low profile? I have push/pull side radiator, 2 back exhaust and 3 intake bottom.

@Rymc 6 ай бұрын

What do you do with the parts you don't need anymore from all these builds Chris? Tried emailing to ask if you sell them or how one might acquire parts from you. Trying to put a new machine together. Based in Wicklow. Wondering if you've a store somewhere perhaps online even like Adverts?

@straightlinesmackdown 5 ай бұрын

- air flow in your build . 3 140mm intake 1 360mm aio exhaust and 1 120mm exhaust would be good

@TheMissing8 4 ай бұрын

What electronic screw driver are you using here? I looked through the description but didn't see it or missed it.

@kieranbrekke1676 3 ай бұрын

I didnt seem to receive the cable that you used for the aio L connect, i had to use the single one for the motherboard, do you know where i can buy just the cable from?

@DaBearsGSH Ай бұрын

I have a question, can the hub that comes with the lian li aio be used instead of the one that comes from the 3 pack, I plan to use the reverse blade fans for intake on the bottom and on the radiator and use 2 of the radiator fans as exhaust in the back. The reverse blade fans do not come with the controller is why i ask. I plan to use the Galahad ll trinity sl-inf as well as 3 reverse blade 120's on the radiator as intake and 3 reverse blade 140's on the bottom as intake.

@horaparider6538 6 ай бұрын

How is the air flow? I'd like to set something like this.

@ivanwill 6 ай бұрын

Another nice case, and install. But, did the GPU support bracket come with the GPU?

@elbert577 6 ай бұрын

comes with the case

@ol_snazzy2tap837 4 ай бұрын

Can you vertical mount the GPU with two fans on the back?

@JairusJoy 2 ай бұрын

please help me do you like this or the tuf 502????

6 ай бұрын

que monstruosidad!!!!!!!!!!!!!!!!!!!!

@oussamabourezzane285 6 ай бұрын

Am watching you from Algeria 🇩🇿

@ChristopherFlannigan 6 ай бұрын

Welcome

@GF_Burke 23 күн бұрын

You did well. Might as well remove those 2 exhaust fans.. You have 9 in and 2 out. Those 2 are just in the way for cfm. The case is pretty.. but... not good for flow.

@sidesw1pe 3 ай бұрын

I got a Gigabyte Aorus Master X and, naturally, it doesn’t have a middle screw hole so I can’t mount the GPU bracket.

@phanderous4090 24 күн бұрын

what did you use to sync the lights?

@brandonhernandez7193 6 ай бұрын

@ChristopherFlannigan what electric screwdriver are you using in this video?

@Cali_Sense 2 ай бұрын

Idk the exact name but google HOTO electric screwdriver

@user-bo5zs3un3v 5 ай бұрын

Any idea where to get longer screws for the push/pull on the radiator ?

@Steve-lk6bi 4 ай бұрын

You'd think they would be included considering Lian Li recommends push/pull.

@Sean-lc2yn Ай бұрын

did you get an answer to this because i'm in the same situation

@anitaagostini3321 2 ай бұрын

@ChristopherFlannigan will 37mm screws work for the push/pull aio mount?

@anitaagostini3321 2 ай бұрын

Never mind, I rewatched your video and was able to hear you say you used 36mm, so 37mm should be fine.

@vancrash666 6 ай бұрын

This way of mounting radiator - will it not affect lifetime of pump?

@gortex79 6 ай бұрын

No as the air bubbles will be at the highest point which is the top of the Rad

@manikal99 6 ай бұрын

This is bad form. I wouldn't recommend it

@fisher_price 5 ай бұрын

Yes it will immediately send air up to the pump itself. It’s really bad

@rodmoura 5 ай бұрын

doesn't the Lian Li fans spin in reverse? Did you actualy have to install them backwards?

@cardiffdevil82 3 ай бұрын

Should be other way round I thought

@ErtanPowa Ай бұрын

It’s better this way for the airflow I believe. But he could buy the ‘reversed’ unifans for the style.

@callumc4192 3 ай бұрын

How much was this guild build

@coldracerx 6 ай бұрын

Not a big deal but I think the AIO orientation is a bit odd. Also I would have moved the motherboard tray up and use one fan. The extra fan does not help much and the aesthetic would be way better.

@bradysmith5944 5 ай бұрын

I was looking into this case but if thats the only way to mount the aio then i guess ill keep looking

@roarbahamut9866 3 ай бұрын

@@bradysmith5944 Most builds put the radiator on the back. Both the bottom and the back are used for cold air intake, so it makes no sense to put it on the bottom, especially since you will be able to have your pump in the right orientation (in the current layout, it could suck in air bubbles with could damage the pump over time).

@tribu121625 6 ай бұрын

this guy's hairstyle is so iphone 14.

@ErrorOccured545 5 ай бұрын

Oh Yeah!!!!! What a vision. 😂

@Noxferato 2 ай бұрын

Can someone please explain to me why was the AIO mounted this way when he had both options in terms of orientation. (Which orientation is better if i have both options)

@ErtanPowa Ай бұрын

I think it’s a mistake. According to me the pump must be below the level of the radiator inlet.

@JeanLucSchieferstein Ай бұрын

The air in the pump (1-5% nominal) rises above the water to the highest available path. If there is air in the pump it will not move the water through the radiator as efficiently. However, the radiator in this video rises above the level of the pump, so, the air should naturally follow the path to the top fan-section of the radiator. The mistake of mounting the AIO incorrectly is more common in 240mm and 280mm configurations where the radiator is smaller and often the motherboard seating is higher in the case. That’s generally why, as a rule of thumb, ensuring the hosing is mounted above the pump can help keep you from making that mistake.

@cardiffdevil82 3 ай бұрын

Should the side fans be facing in cos its uni fans?

@ErtanPowa Ай бұрын

No it’s better this way for the airflow but he could buy Lian li Unifan « reversed » for a better style 😅

@_RIL_ 6 ай бұрын

Anyone know when this case is due to be released?

@blikied 2 ай бұрын

out now for sure

@user-bv5fn3uc5e 6 ай бұрын

Hm is the build?

@gammafilter 6 ай бұрын

Is there value in keeping the ga 2 performance fans?

@socialaudacity 14 күн бұрын

So... I don't have this extra 36mm screw to change the fans on my aio like you? How is this a step by step guide man. I'll be stuck at this point lol without the magic screws you pulled out your backside.

@makiwa 6 ай бұрын

Very nice build, but I think I prefer the EVO XL, which I bought recently.... Thanks.

@ChristopherFlannigan 6 ай бұрын

Fair enough!

@makiwa 6 ай бұрын

@@ChristopherFlannigan Just FYI I bought the new EVO XL after I saw your review of it - and build!

@nicholassmith6983 2 ай бұрын

How many fans did you have to buy

@ErtanPowa Ай бұрын

7 is enough 👍

@cardiffdevil82 3 ай бұрын

This is 3 intake and 5 exhaust?

@mrhistoricsoap Ай бұрын

6 intake 2 exhaust

@martinedwards262 6 ай бұрын

nice case....

@ChristopherFlannigan 6 ай бұрын

It sure is!

@JosePto 6 ай бұрын

I start regretting buying the O11 Dynamic Evo...

@williamdainese 2 ай бұрын

16:50 What did you say?

@wankerka 6 ай бұрын

With out the top fans is a bit concerning for me...... well see for now

@ChristopherFlannigan 6 ай бұрын

Looks over cooling, but perfect if this is most important to you

@tigerbalm666 6 ай бұрын

Dat is thicc!

@williamdainese 2 ай бұрын

34:34 Whatch out 24pin conector

@fisher_price 5 ай бұрын

6 intakes and 2 exhausts. Is that even good?

@coskun2036 5 ай бұрын

Yes, positive air pressure - look up the benefits

@RUMINET 2 ай бұрын

Poosh tha kabel unto the caase unto the spaace right unto plaace.

@volvot6rdesignawd702 5 ай бұрын

why mount the AIO like this.. you do know the fundamentals of AIO placement right??? You should never mount the AIO like that the pump head should always be lower than the tubes going into the radiator other wise you can create airlocks !! for people building their first pc not a good look !!

@alejandrosilva9683 5 ай бұрын

Bro really telling someone that has built hundreds of pcs, what's better and what's not 😂😂

@ChristopherFlannigan 5 ай бұрын

You get them. Even a fool who keeps silent is considered wise; when he closes his lips, he is deemed intelligent.

@volvot6rdesignawd702 5 ай бұрын

@@alejandrosilva9683 maybe watch like every other tech channel like gamer nexus and jays two cents on how to mount AIO's correctly and tell me im wrong.. then explain to this person the fundamentals of how to mount a AIO correctly who has been building literally thousands of PC and see how he does this one wrong !!

@volvot6rdesignawd702 5 ай бұрын

@@ChristopherFlannigan you think im rude or a fool so be it .. But people who follow you and see that and build it the same way and have issues who is going to look like the real fool you or me who just wants to pull you up on a obvious mistake!!

@NoobMasterSSS 4 ай бұрын

Well there’s nothing wrong with installing the AIO like that. I prefer rotating it 180 degree though, for better aesthetic. Also, calling someone less than a fool is rude bro. He was just pointing out something he didn’t understand. Instead of educating him, you went the childish route. Being a KZfaqr and all you should always try to educate people even when you have to repeat yourself 1000 times.

@p-Nitti 2 ай бұрын

Dude you have 9 fans pulling air into the case including 3 sucking hot air thru the Radiator, and only 2 exhausts? Is this computer gonna be sitting in a 55 degree room? The bottom is right sucking in but the Top needs to exhaust that will create a stream going from the bottom up thru the case, and the side 3 and back 2 should also be exhausting. People do not do what he did here you will be creating a windstorm inside the case that will overheat your components. WOW

@TheSjuris 2 ай бұрын

Dummy there isn’t any top fans in this case at all. Maybe you need to go to eye dr and check for blindness.

@oussamabourezzane285 6 ай бұрын

First one

@ChristopherFlannigan 6 ай бұрын

👍