Discussion of video lessons, work area, tools needed, shop press, fixture for holding case and safety equipment For kit and parts visit: www.transmissio...
Пікірлер: 68
@irinica765 жыл бұрын
Hi Jimmy. I am Irinel from italy. I broke my transmission of my 5.9 jeep grand cherokee zj. I am not a mechanic and I never work like that. I like cars and get my hands dirty from time to time. This was a big challenge for me but with the help of your class I Did It!!!!! I lost the reverse of my transmission and it made a very nasty noise. I look at all your class and I fix it. Very accurate in explaining everything and I want to congratulate you for your professionalism. Thank you
@codydeardorff91413 жыл бұрын
Thank you very much Jimmy. I just test drove my rebuilt 46RE and it works great. I was quoted $2875 at a well-practiced local transmission shop for a rebuild without diagnostic. This project cost me $903.83 and some well-spent time learning about how these transmissions are put together.
@shakinbottles10 ай бұрын
Did you make the stand? Is it hard without it if not?
@codydeardorff914110 ай бұрын
I made the stand as Jimmy instructed. I believe that it made the project easier.@@shakinbottles
@TheCzechmate0074 жыл бұрын
Dear Sir, I cannot thank you enough for your lessons! Thanks to you, I was able to rebuild my Chrysler 44RE transmission myself. Something I would never imagine doing before watching your videos. THANK YOU!
@screamingcockatoo8 жыл бұрын
These videos convince me to find a truck with a bad transmission and do it myself! So I got a 1997 Ram 1500 4X4 for $500! Forward planet was destroyed. I now have it apart, have ordered all the replacement parts and will assemble it next weekend!
@jonassal69375 жыл бұрын
I just bought a 2004 2500 4x4 for 6000$ no reverse. Might be reverse servo or reverse band
@stunnasam215 жыл бұрын
Well how did it go!?
@jonassal69375 жыл бұрын
@@stunnasam21 if you're asking me , I fixed it. It's my daily. Check my channel. I bought another truck with another bad transmission (:
@MEANSBC5 жыл бұрын
You get it fixed?
@jonassal69375 жыл бұрын
@@MEANSBC yea,I just sold it yesterday lol. Made a nice profit.
@kraventhearcher8 жыл бұрын
What an incredible opportunity to be able to watch and learn from a great teacher.
@danielallaire89844 жыл бұрын
Rebuilding my 46RE transmission is gonna be fun because of these lessons. Thank you so much
@Im_a_dumnigga6 ай бұрын
These lessons are without a doubt the best instruction for this project. I can't even imagine the amount of money this series/man has saved people. Thankyou Transmission Bench!
@user-yz2cw1je6l6 ай бұрын
This man gave me the confidence to rebuild my first automatic transmission and I've been a geared all my life, but always ran from auto trans...if you follow this man STEP FOR STEP WORD FOR ABSOLUTE WORD, you will have an auto trans that works flawless. Only 1 slight issue with mine I have to figure out (I'm sure it's my fualt) lately it's been starting in 2nd or 3rd gear after a stop now and then. It's not limp mode, feels like a sticky valve. When I roll to a stop if I take off and it's in 2nd or 3rd, if I shift to neutral then back to drive it's fine. All new borg warner gov pressure sensor and solenoid along with mopar brand overdrive sensors. I'm not sure if this is where to ask him a question directly, but I hope he answers me !
@justinmesa76678 жыл бұрын
This is great! I just stumbled upon this series and I need to fix my 46RE. I haven't seen the next videos after this one yet but I have a feeling it will show me what I need to fix. Thank you for making the video.
@andresarrellin39493 жыл бұрын
Andres from phx. Az. I used your tutorial and followed all the steps to a tee. 6,500 miles and she feels like a new transmission. Thank you .
@beerjoints6 ай бұрын
I’m trying to get the confidence to do mine. I can’t find a trusting shop in the Phx area either.
@hondohellsfire50087 жыл бұрын
this is my first rebuild and i thank you for your time
@Filth_McNasty4 жыл бұрын
That is a beautiful story. Thank you. I needed to hear it.
@roberthayes50373 жыл бұрын
Absolutely awesome course. Very well explained. Thank you so much for this class.
@dustinbodie5675 Жыл бұрын
dude this is awsome! I can't believe this is online rn I'm so happy lol
@ChannelZeroOne7 жыл бұрын
KZfaq has a speed button which helps with people learn faster. 1.5x is about perfect. To author: Your videos have been very helpful, so please don't take offense to this.
@bovellois6 жыл бұрын
:-) Set it at 0.75 if you had 3 beers, 0.5 if you had 6 beers
@chriskelley22497 жыл бұрын
Hey, Your video series have helped refresh my mind. My 46re rebuild went smoothly. Maybe I’ll have a C4 to rebuild here soon and my confidence is very high after this build. I'm thinking of investing in some tools to ease the process.
@iraqafghanistanmarine69055 жыл бұрын
This is the funniest deadpan instructional video I have ever seen. Especially when he talks about getting excited😂
@ttkschapman8 жыл бұрын
I will be taking out my 46RE soon. very soon. thanks for your help.
@orangeeclipse8 жыл бұрын
you are awesome. thanks so much for your videos. i plan on doing my 47re 2nd band slipping. so thanks again
@perverso123459 жыл бұрын
cant wait for next video .you inspire me mr William i decide to start to work on my 4l60e .i hope i fix it right .
@transmissionbench78429 жыл бұрын
+perverso12345 Thanks. I'll post the videos as fast as I can. Jimmy
@vendassales47732 жыл бұрын
This class is amazing... thank you 🙏🙏
@gregmiller86428 жыл бұрын
your videos are very articulate and easy to follow you've help me tackle this my self no problem much thanx gam
@offroad4life8922 жыл бұрын
Going to start rebuilding mine soon, thank you for all the info!
@michaelfrancis32618 жыл бұрын
wow! I'm loving these video. whens the next one coming ?
@marckemp995510 ай бұрын
I think mine needs a torque converter and front pump in the least but that probably would get me another maybe a year before I had to take it apart again. Might as well have it all done.
@connormifflin93792 жыл бұрын
Can any 46re be swapped between vehicles, or are there different kinds of 46re transmissions?
@nmartin5551Ай бұрын
I have a dodge van. I think it is not if but when the transmission will fail. I have talked to a former chrysler tech friend who says it can’t be done at home. Looked at another video that says you can’t. I’m interested in seeing if i CAN do it at home.
@arizonahandy94813 жыл бұрын
Fantastic teacher- where were you when I was in school
@chrisarmao71145 жыл бұрын
Hey transmission bench. I have a 46re 2001 dodge 3500 cargo van. I’m having trouble shifting from first to second gear. It will shift at about 27 mph I’m just curious what your thoughts are and what the most likely problem is. Your videos are awesome
@kevinmoncada51202 жыл бұрын
Is there anything different from this to the 4x4 version.
@waiting4aliens4 жыл бұрын
Thank you.
@PanhandleFrank3 жыл бұрын
How much would that wood transmission stand cost to build today (Summer 2021)?! WAY more than twelve bucks, I wager!
@Zamorakphat3 жыл бұрын
Does this series apply to the 42RE/A500 transmission as well, or at least can be a base for understanding?
@fernandofaraldo75117 жыл бұрын
Thanks for your help
@jkerry8128 жыл бұрын
Thanks for making the great videos. My first and only trans 20 years ago was a TF727 for an RB block. Pretty simple if I remember. Just had to build a clutch pack compressor out of some all tread and angle iron. Now I have a 2000 Durango that belonged to my dad before he passed that slips really bad when you first start it if its been sitting over night or longer. i learned to start it and let it run a few mins first and a few high revs and it seems to be fine after that. been doing that for a few years now. only drive it a few times a year but runs and shifts fine after that. Im Thinking seals are bad and all the oil is running out of everything and going "dry" and by letting it run gets oil back to everything. What do you thing? I also have a 4L60 to do in a 1998 K1500. think that one is just a converter lock up sel. you can feel and see the tack surging above 40 MPH. seems to run and shift fine other wises but thinking of total rebuild because this is going to be my "new" plow truck. I would condenser myself a very serous back yard hack. ( 2500sf garage and 2 lifts) I trained as a mechanic back in the late 80's and was in the field for short time. I still enjoy working on my own stuff and my kids and friends. I have been wanting to dig into these 2 trannys but lacked the knowledge plus im more of a hands on kind of learner so your lessons are great way for me to learn. Plus im doing these with my youngest son. Would like to see him get into doing transmissions on his own. good money in them and I'm setting him up with everything he needs to do them. Any How Thanks a ton for making these videos. cant wait to see what you do next. Jim K
@transmissionbench78428 жыл бұрын
+jkerry812 Hi. There is actually nothing wrong with it. The torque converters on 904, 727, 46RE, 42Re etc. drain back into the pan if you let them sit for a few days. I have a 1997 Dodge Ram 1500 myself, which I bought brand new in "97. It does it too. I now have a total of 248,000 miles on it and the drainback has gotten a little worse over time. all you have to do is put the selector in neutral for about 15 seconds after you start the engine. I just live with it. ...hope this helps....Jimmy
@lousassol8 жыл бұрын
+Transmission Bench My 94 cummins is doing the same with 50k miles on trans. Only takes about an hour for drainback but if I put it in neutral first for a few then into drive everything seem fine... My truck just started doing this so It's a little scary especially when I took it to a shop for "professional opinion". They said front pump was bad and I need a rebuild to the tune of 3000 dollars... No thanks haha... any help would be greatly appreciated..... Where are you located TransmissionBench?
@Connor4x42 жыл бұрын
Turns out I already have all the tools needed for rebuilding mine.
@uyhgar3693 жыл бұрын
Could someone please help me? When servicing my transsmission, the Trans Pressure Sensor Transducer retaining clip broke. I can't find it anywhere I've been to many trans shops. Does anyone know where I can find a part like this
@newmexicosportsacademynmsa14594 жыл бұрын
Hi. Thank you for these videos. I had a 46re rebuilt 10 months ago. Now I’m doing a hemi swap into a 02 durango. The problem I’m coming across is there isn’t a stand-alone tcm. Is there anyway to get a stand-alone tcm or is there anyway around it? Thank you
@rubennegron93614 жыл бұрын
I have a 03 Dodge Ram 2500 5.9 Cummings w/48re. I have an intermittent shuttle shift at 60 mph to 70 mph. At 60 mph at 1800 RPM in overdrive the trans. Will shift down to to third gear and eng. rpm spikes to 2500 rpm and will go back and forth unless I push the tow haul button and limp back in 3rd gear at 45mph. I was going to replaced the governor solenoid to try to fix it and sell it until a saw your video and I thought why not overhaul it since already have 225,000 miles and my bands are adjusted as far as it can go.What do you think?
@jacobcobb47785 жыл бұрын
Just bought a 2003 ram 1500 5.7L auto trans 2wd. What transmission came standard in this truck?
@TimDaCorgi6 жыл бұрын
My durango has this exact transmission
@nickhunt8114 жыл бұрын
545RFE transmission do u have a video on it
@jmnexms5 жыл бұрын
How do you know which transmission you have? Where do I find that info?
@mohassan58409 жыл бұрын
Good Luck.
@transmissionbench78429 жыл бұрын
+Moh'd Hassan Thanks.
@fourfortyroadrunner8 жыл бұрын
THANKS!!
@walt91845 жыл бұрын
i have a 94 dodge ram is this the same transmission 46re transmission?
@codylau77183 жыл бұрын
It's a 46RH. I'm not sure how much different it is.
@TheSkoto16 жыл бұрын
wheres part 1 lesson 2
@clarencethornton16038 жыл бұрын
whats the difference between the 46re transmission and the 46rh transmission . does any one know ? they look the same.
@Bristerboy9228 жыл бұрын
The 'e' in 46re stands for electrically actuated valves wheras the 'h' in 46rh stands for hydraulically actuated valves. identically same gearing, just different actuation and connectors
@basketballjones67826 жыл бұрын
Let's try an accurate answer for you... The RE has electronically controlled line and governor pressure, with an electrically controlled shift valve for overdrive and lockup converter. The RH has mechanically controlled governor and line pressure, with an electrically controlled shift valve for overdrive (and lockup converter, if so equipped).
@justinupshaw6727 жыл бұрын
talked about the tools needed yet did not list them. socket size and such
@stunnasam215 жыл бұрын
6:38
@theyoungmechanic91215 жыл бұрын
Part 1 is actually a waste of time like you just show us how to rebuild it and stuff instead of talking about the history and crap🤷🏻♂️