What are you working on?

Not sure dont use that programmer

What style computer is it? 3 plug?

bad ECM

Can’t do 4 plug

Autel cant do skim delete

That would be considered a 4 plug ecm which we do not support skim removal on.

You need to program the new pin to the new win. I have had issues with dodge cars win modules over the rear deck lid. Micropod2 has been the fix.

Do part numbers match on both computers?

If YOU do not have skim then the PCM from FS1 would need to be skim reset or a non skim PCM in order to be plug n play.

What are we working on?

Just need to mail us the computer. Email me and I will send over the form to fill out and put in the box. Spartanautoworx @ Gmail.com

Change skim key and computer

Not sure maybe bad ecm

Could be a bad pcm or power issue

You need to do it out of the vehicle and clear skim on the bench.

Spartan Autoworx I tried that. I guess I need to ensure my bench harness connections. They were all SCI bus PCMs. I know JTEC had CCD bus PCMs as well.

I guess you could also unplug the skim and do it in the car but never had success doing that.

Spartan Autoworx I tried that first, that didn't work. It has in the past with SBEC. Are you using ToolBox3 update?

@@SpartanAutoworx that works for SBEC PCMs at least in neons. I am wondering if unplugging SKIM in the Jeep didn't work for me because the BCM or some other module is still broadcasting message. I got my bench flash to work though. I didn't realize the DLC I was using was from an older CCD bus vehicle so the pin was in the wrong cavity for PCI bus. swapped it and it worked fine.

No idea. I dont really follow anything in the swap word for DCX stuff

Had it been replaced?

If a non security computer sees skim it will trigger the skim in the computer

So you plugged in a skim to a car that did not have it? If so computer now will have to have skim reset and remove the skim module from the vehicle.

@@SpartanAutoworx what scan tool is need to do so. it only a field truck so I don’t what to spend to much I also put the other pmc in, that the ignition came from which removed the skim light but still won’t start

I’ve never been able to successfully delete that computer

It can not

Yes four plugs have a built-in TCM

Thats a 4 plug PCM dont know much about them.

What’s the year make model?

You could have same base part number but different calibration level

Not something that can be done with factory tooling.

Well according to dealership when I talk to him and everything I've learned over the past year of two years of dealing with us I got it somewhat fixed and I drove it for a year but I didn't have an ignition I had to put a push button I had to have the key for power but I usually push button and I didn't have a heater or turn signals it was too bad fuses in the bottom of my fuse panel and they didn't look blown but once I changed them I got everything back ignition and blinkers stereo heater controls I got it all back. This time I replaced my whole front end up in lower ball joints tie rod ends anyways and lighter hadn't been in it and I put a brand new battery in it and I started up it started up and ran come back 20 minutes later all my gauges were blank dead like it wasn't even running when I shut it off it'll start shut off start shut off so they said if I get new skin module that can program it so I went and got a skim module and everything and they can't do it laptop that they use for it is messed up he's trying to hold the plug in and everything else and I called around everywhere around here and nobody else can do it. So I went to the junkyard got the PCM the skin module ignition and the key out of a running Jeep and that fixed it but it cost you almost as much as buying all of it brand new that's $1,500 bucks.

Cant delete that style pcm

For a programmed pcm call importapart with part number and vin with miles. If the skim is bad remove the skim from the vehicle before installing. Importapart sells programmed used ecms ready to go. 314-502-3104

@@SpartanAutoworx thanks ill check it out

What kind of pcm? 3 Plug? If so depending on the PCM yes I do.

Spartan Autoworx I have a 3 prong. P/N P56041801AF. It needs a VIN and I have the black key.

Chris Facey see this link and send it on in. gmflash.com/chrysler-skim-reset

Do you do 4 plug?

We can disable SKIM on 2 and 3 plug computers for $110

@@SpartanAutoworx you still do this?. I have an 01 jeep grand cherokee limited and I want skim deleted

Looking for a chrysler PCM? Call importapart at 314-502-3104 tell them spartan sent you.

@@SpartanAutoworx I found him on ebay, thanks.

Spartan Autoworx do you have a website , from canada long distance charges apply

Sounds like bad pcm to me

My plugs are 3.

Reach out to Importapart hazel wood mo

I would bet bad pcm being that it’s a Chrysler product

Reach out to us by email

Sounds like the pcm you put in has skim security and the van does not.

Alt control on DCX computers fail allllll the time. Needs replacement pcm. What's funny is I had someone tell me in the last few weeks the dealer told them the pcm needs a reflash after alternator replacement. I'm not sure if it was just a dumb service writer or trying to upsell a unknowing customer.

Where did you get one from?

Yes. Remove computer clear skim. Remove skim module plug in computer.

@@SpartanAutoworx what brand J2534 pass thru tool do you like to use for flashing?

Drewtech

Does this work with 4 plug, I got a 4 plug coming, company said it's set to my VIN and security reset and they said it should be plug and play

I believe its a separate module not associated with the skim. Maybe look into theft module or alarm module.

Spartan Autoworx - would you happen to know the location of this alarm module ?? And this is probably something a vehicle locksmith should know right??

So Ended up getting an ECM from another company, Preprogrammed to normal specs etc. they put it in and the Jeep ran with no alarm. Then I believe went to turn off and start again and it won’t start. The locksmith has been trying to resync to no avail. Still in lockout mode Believe they just ordered a new skreem to see if they can get better communication and everything to sync. If you have any suggestions, I’m all ears

I have the exact same problem 2005 Jeep Grand Cherokee have the skim delete Jeep starts runs good but the security is coming on horn and lights flashing anyone have a fix for this problem any help is appreciated thank you!!

Around the key if equipped

4 plug computer?

What are you working on?

Skim on ecm is now active what’s part number off ecm

@@SpartanAutoworx I am not sure if you figured out how to clear the 4 prong but that is what mine is. part# p56029042ae

huh

dodge & chrysler has no bypass they do Delete only ..any Reman PCM comes without skeem enabled ..but if pcm see skeem in the network it will become enabled immediately so make sure you disconnect skeem module before you plug your pcm

is it a 3 or 4 plug ecm? part number I can look it up

3 plug P04896416AH

If its possible can you do my pcm my car has been down since august i brought it with no keys. Had a locksmith come out and started and ran for 5 mins. Then would just crank no start. Now its just a click from the fuse box in the back. Dodge says its the win. So i got a used one with a win module and oem lock cylinder and key. And a new pcm unprogrammed and dodgeis still having problems getting it to run

Try importapart 314 502-3104

That’s a four plug unit which we do not support for skim reset

I can not do anything for that vehicle.

vehiclle lock u off after 3 or 4 what u do then?

We can do it. $110 return shipping included. Email me for the form and we can get the process started

plugnplayparts.com/skim-programming-request-form

When we reset the pcm from your car we rewrite the vin

@@SpartanAutoworx I know that I’m saying on my ecm when I pull it out will it have my cars vin on it

After like 5 failed starts it will no longer crank. I would really need to see more key data and ecm data to diag what you have going on.

@@SpartanAutoworx wouldn't it set a code or show the antitheft light on the dash? P0633 is what I see in the PCM when scanning for codes. Key was programmed initially and it is not working now after it just shut off the engine when go going on reverse. Also, the car has a alarm system that bypasses the security module, that is also not working when trying to start the engine. If I put a new PCM with the VIN updated for the car, do i need to reprogram keys or does the WCM store the programmed keys?

@@scientist100 how u fix mine pt2005 skim alarm imob bat off 20hr key not recog so bridged rem to hot on starter while person2 cycle ignition ect to run it recharged battery +tried leave key in barrel but 6hrs later it still no longer recognises key unluckily.But it can be started & runs/drives perfect without skim delete its a relay that if u jump across it the hot wire for the rem cut /ignition start wire where u want a short wayaway from skim&key.doing myself to avoid rfid skim in order start my car now.☆joedog+buddy☆2005PTcruiserVan

@@joeyallcock1011 this customer had an old Durango so he agreed to do a skim delete service at the PCM level. No more chip or security needed. His aftermarket alarm just needed to unlock/lock function to be hard wired to the trigger wires which he did instead of using the skim module which had to be removed with the new mod. If it gets installed, the PCM gets bricked again lol

@@scientist100 all you really needed to do was look at wires from ignition find small relay then will clue you in on wot u do to avoid expense of delete as this allows start wen key/ fob show no longer ŕead false by skim/ or wen get a key only cut therefore rfid chip not present. its quite simple really.☆joedog☆+my k9~buddy☆with our~2door2005/PT~PVC PTcruiser~sportswagon~2door~Panel Van Conversion

1998 jeep cherokee , im looking to buy a replacement for mine. Thanks

Importapart 314-502-3104 tell them spartan sent you

importapart

Just go back to yhe junk yeard, get the skim from the car u got the ecm from, as well as.the barrel and key. No programming necessary

VIN would not be correct and many places wont pass smog inspections with incorrect vin.

We can do some 4 plugs now

Who did you order from? Unplug skim as soon as a non skim or skim deleted computer sees skim its automatically enabled again.

Spartan Autoworx I've been working with module madness out of Colorado.

Spartan Autoworx Also, my 97 dakota does not have the security feature. Fuel injectors shutdown after two seconds, asd doesn't trip. I can use starter fluid and keep it ringing for a few more seconds. Every sensor I've tested tests OK.

StL MO

Does it throw any codes?

@@SpartanAutoworx low oil pressure

@@SpartanAutoworx low oil pressure that's it

Car won’t start

@@SpartanAutoworx any way to turn it off or reset it without towing it to a dealer?

What year make and model of pcm?

Sounds like bad win module

@@SpartanAutoworx awesome! Thank you for the reply. It is currently being towed to dodge again (the good one in my area) for a diag. I'll let you know

@@SpartanAutoworx after 3.5 weeks at the dealer waiting on the part, it was a bad win module. $950 for dodge to replace and program it. Rediculous pricing!!!

Any used pcm will always require programming.

2000 jeep grand Cherokee lorado

Help

We delete the skim with our skim delete service so you will not need a chip key

If you need a new Chrysler ECM call 314-502-3104

@@SpartanAutoworx thank you it was running fine earlier but i want it to run good like always not just sometimes

they got a skim delete ecm

Vin would not be correct.

I just did this. Replaced pcm skim and key tumbler. Runs great. Butbits reading 3 bad 02 sensors. Theres only 2 on this jeep. Old codes?

Yep done it myself on a few Chryslers and one Cadillac. All earlier then 2005.

Most people can’t read older skims pre 2007 and dealer would only need vin to cut key

Yes it on our website but here is my email and phone. 314-433-5274. Spartanautoworx @ Gmail.com

What question do you have?

If you remove skim and pull the blub the car will run fine. Just never plug the skim module back in or the computer will re enable skim.

Of course, skim must be cleared from the computer first.

@@SpartanAutoworx Sorry How do you Clear The Skim from the computer?

So I have a 2000 cherokee, I lost the key, but found my old key that I took apart and has no chip. Can I remove the skim with hptuners. I need to get this done pronto!

skim stop fuel to engine & imob syop rem to hot starter jump a certain 20a fuse to under relay to bypas

From pcm or skim module?