Circle Pendant White Gold Micro Pavé 1,3mm diamonds

  Рет қаралды 35,808

vandoorenniels

vandoorenniels

6 жыл бұрын

In the video you see Niels van Dooren setting diamonds in a 3D printer circle pendant in white gold. Stones are all 1.30mm diameter.
Visit: www.vandoorendiamonds.com
www.keesvandooren.com
Music used:
- Midsummer nights dream - Mendelssohn
- I Need to start Writing things Down - Chris Zabriskie

Пікірлер: 39
@Conqueror285
@Conqueror285 2 жыл бұрын
Your work is excellent and has become a great source of inspiration for me. I have learned so much from watching your videos. One thing I haven’t been able to understand is how do you mark out stone around a circle with equal gaps in the middle? How does your fist mark meet the last one perfectly?
@imcharliebruh7516
@imcharliebruh7516 Жыл бұрын
Personally I would drill the circles but hes that good I guess personal preference. Knows where his drill is going
@imcharliebruh7516
@imcharliebruh7516 Жыл бұрын
Comment is super late but thata gorgeous love the forks you put on the outside claws
@heinikendude
@heinikendude Жыл бұрын
Ha ha thank you!
@user-eq8ou5gi4h
@user-eq8ou5gi4h 6 жыл бұрын
great job.
@heinikendude
@heinikendude 4 жыл бұрын
Thanks !
@brunobento1307
@brunobento1307 6 жыл бұрын
Profissional. Sou do Brasil meu sonho é aprender com vc.
@heinikendude
@heinikendude 6 жыл бұрын
Bruno Bento thanks !
@hermanarzuman
@hermanarzuman 6 жыл бұрын
Hi its very nice work thanks for this video...ı see that you set the diameter 1.35mm...but ı dont understand how do you know that the 0.05 mm gap will be complete..because its the circle...
@hermanarzuman
@hermanarzuman 6 жыл бұрын
Thank you for not answering
@heinikendude
@heinikendude 4 жыл бұрын
Hi Herman, Sorry due to a lot of messages I didn't got a chance to reply. You continue with the indication lines but with a smaller or slightly larger radius. This way you will end up at one of the beginning points
@OroaMano
@OroaMano 4 жыл бұрын
Great work!! Two questions please.. The knife graver,why is the belly shaped this way? And the flat graver that you use to shape side of the prongs,is it completely straight? No angle face?
@heinikendude
@heinikendude 4 жыл бұрын
HI Oro a Mano, The knife engraver is cut like an eagle nose so it doesnt create drag heal. As for the flat graver this is completely straight but with a 45 - 60 degree face.
@akssvin7389
@akssvin7389 6 жыл бұрын
skillful fingers
@heinikendude
@heinikendude 4 жыл бұрын
Thanks man!
@allenl9214
@allenl9214 6 жыл бұрын
Beautiful.. Thanks for posting. How did you split the prongs?
@antoniorodriguez-tx9ww
@antoniorodriguez-tx9ww 6 жыл бұрын
👍
@heinikendude
@heinikendude 4 жыл бұрын
I did this with a very tiny made prong splitter from an old round bur
@henkdupreez6598
@henkdupreez6598 3 жыл бұрын
Hi is it posible to show how your gravers are shaped and what specifick angles you briht cut with them.And do you use a grave max ore something similar.Im a goldsmith from south Africa but would like to set as well.Love your work
@heinikendude
@heinikendude 3 жыл бұрын
Hi Henk, I usually work with a 60 degree carbide graver. To make angles or circles I round the graver. I have some videos where I sharpen my gravers. But this content is 'hidden' between the stonesetting. Good luck!
@allenl9214
@allenl9214 4 жыл бұрын
Is there a reason why you cut seats with the ball bur first instead of citting the side borders first? Wouldnt it be easier to cut the borders in a continuous cut first?
@heinikendude
@heinikendude 4 жыл бұрын
Hi Access, everyone has his own method, this allows me to create a beautiful shining border going 'into' the seat of the diamond. I prefer this over first cutting the sides. But if you work the other way around it's not wrong or anything ;-)
@allenl9214
@allenl9214 4 жыл бұрын
@@heinikendude that's a good point.. thanks. i have never done such a setting but want to learn. I see videos of people doing both ways so wanted to know why
@heinikendude
@heinikendude 4 жыл бұрын
You're welcome ;-)
@kendoka82
@kendoka82 5 жыл бұрын
Are you using a 13 round burr?
@heinikendude
@heinikendude 5 жыл бұрын
Hi Kendoka82, I start off with smaller burs, eventually I go indeed upto 1.30mm round burr ;-)
@Serob_Grigoryan
@Serob_Grigoryan 6 жыл бұрын
👏👌
@heinikendude
@heinikendude 4 жыл бұрын
Thanks!
@vijaykesarkar8248
@vijaykesarkar8248 5 жыл бұрын
don't see split the prong
@heinikendude
@heinikendude 5 жыл бұрын
Vijay Kesarkar you’re right I didn’t record that specific part. Sorry for that. You can see me splitting a prong in the other videos
@vijaykesarkar8248
@vijaykesarkar8248 5 жыл бұрын
I think not possible 0.05 gap
@heinikendude
@heinikendude 5 жыл бұрын
Vijay Kesarkar thanks for your comment. We chose to do a split prong with some space in between the diamonds on the request of the customer. ;-)
@hustle100
@hustle100 4 жыл бұрын
for a rolex?
@heinikendude
@heinikendude 4 жыл бұрын
Hi, no this was just a pendant ;-) But we can make one for a Rolex
@hustle100
@hustle100 4 жыл бұрын
@@heinikendude I ask because I have a diamond bezel but dont like the setting. Its a track setting you can say instead of the prong which I like the best
@tihomirtachev1839
@tihomirtachev1839 5 жыл бұрын
vak werk
@heinikendude
@heinikendude 5 жыл бұрын
Bedankt Tihomir!
@tihomirtachev1839
@tihomirtachev1839 5 жыл бұрын
vandoorenniels werk jij in Nederland of Belgie?
Oval Diamond Yellow Gold Solitair ring with Micro Pavé Diamonds
11:53
Emerald Diamond Yellow Gold Ring
29:28
vandoorenniels
Рет қаралды 69 М.
2 ct Cushion cut Diamond Ring with micro pavé sides
15:51
vandoorenniels
Рет қаралды 7 М.
Diamond Movado Museum Watch with diamonds - micro pavé - stonesetting
40:01
Triangle Bead and Bright Setting - How To
8:06
A&A Jewelry Supply
Рет қаралды 170 М.
Micro Pavé Diamond Disk Ring - Natural Cognac|Brown|Champagne Diamonds
18:04
Patek phillipe
8:55
Klever Ruiz Joyeria
Рет қаралды 3,6 МЛН
Yellow Diamond Cross
21:00
vandoorenniels
Рет қаралды 96 М.
Micro pave setting by Frantisek HOLUB / Part  2 /
8:54
Frantisek Holub
Рет қаралды 85 М.