Configuring Inter-VLAN Routing on SG350 and SG550 Switches

No video

Configuring Inter-VLAN Routing on SG350 and SG550 Switches

Рет қаралды 72,269

Cisco

Күн бұрын

Learn how to configure Inter-VLAN Routing on SG350 and SG550 Switches

Пікірлер: 39

@greghaa 3 жыл бұрын

For SG350 under VLAN Management -> Interface Settings, you must set the ports to Layer 3. Layer 2 will not route between VLAN's. The video did not cover this.

@Panda33009 3 жыл бұрын

Lmao thx

@jh2561 3 жыл бұрын

I got the routing to work after leaving the interfaces at layer 2 and enabling IPv4 routing. Perhaps I am missing something, but I found enabling Layer 3 and IPv4 together did not work. I think the switch performs Layer 2 switching with IPv4 routing, but when the interfaces used are at layer 2. The Administrative Manual is severely lacking in detail. I can ping between IP 10.1.1.1/24 & IP 10.1.2.1/24 and network shares on PCs on different VLANs can be accessed. That is why I bought the switch, but the information on setting up is brief and for the experienced user.

@saurabhraghuvanshi7126 2 жыл бұрын

@@jh2561 Hi sir. I am also stuck with the same situation. Can you pls guide me through.

@mrcgeraldes 2 жыл бұрын

This has to be incomplete..... This just shows hot to create 2 vlans. Not hhow to forward traffic between the 2

@77seconds 3 жыл бұрын

I don t know about the specific settings in a SG350 switch, but in my SG250 i first needed to activate the "IPv4-Routing" checkbox under IP-Configuration > IPv4 Interface...

@JustaRandomtre 3 жыл бұрын

I am planning to buy sg250, can we configure multiple vlans on single port..

@CiscoSystems 3 жыл бұрын

Hi Prateek, It is possible. You can have three vlans on one port if the switch configuration allows it. You can learn how to do this at community.cisco.com/t5/networking-documents/how-to-define-the-vlans-allowed-on-a-trunk-link/ta-p/3131083. We hope this information helps!

@user-ci4ib2pp5s 2 жыл бұрын

It doesn't work at all. I don't understand, why CISCO is publishing a video with the incorrect instructions. Or this is the advertisement for a spokeswoman from CISCO?

@obadvw 3 жыл бұрын

this doesn't work , devices can't reach each other on different Vlan

@christophersaunders4664 3 жыл бұрын

Hi and thank you for this video. Following the steps detailed here on my SG350-10P switch, I'm not able to ping the other vlan when connected to a configured port.

@akhmedsaymaev2327 2 жыл бұрын

Configured only through the terminal CLI

@haybolrambol5001 11 ай бұрын

how can I configure VTP domain name in this kind of cisco switch? thanks

@igorsimonovic2936 2 ай бұрын

I bought cisco sg350X-48 because of inter vlan routing. When i do the same setup as in video in cisco packet tracer it works. But when i repeat in real device it simply doesn't work. It should be easy but it doesn't. I do not know if I am missing something.

@CiscoSystems 2 ай бұрын

Hi there, we're sorry to hear that you're having trouble. Please open a case with our Support team at: cs.co/60555YCZ5. They will be able to look into this further for you. Thank you.

@akhmedsaymaev2327 Жыл бұрын

I have some ports disabled after power off on the cisco switch how to enable them through the web interface

@andresavoie9248 3 жыл бұрын

This definitely does not work on a SG350-10MP I have one and I set it up exactly the same, well I sent another route to 0.0.0.0 0.0.0.0 also via default gateway 192.168.0.1

@sureshbandi111 2 жыл бұрын

Your smile is very njce

@shanebagel 8 ай бұрын

Bro u trying to pickup women in cisco tutorials lmfao

@kundanbisht2001 3 жыл бұрын

Nice video...👍

@IvanRosaT Жыл бұрын

This is great ! I can ping from each subnet their default gateway, although I dont have internet access among them, how to fix that?

@CiscoSystems Жыл бұрын

For questions about some of the technical content you’ve seen this, check out our CiscoInsider User Group to engage with product experts and share best practices around Cisco tech in private community forums. Learn more community.cisco.com/t5/cisco-insider-user-group/ct-p/ccp-home

@nooraalam3269 6 ай бұрын

Kindly, Make A Video On Trunking Between 2 Cisco SG350 Series Switch

@shaikhnadeem8255 Жыл бұрын

Thanks

@jh2561 3 жыл бұрын

I connected the SG350 to a TP-Link TL-ER7206 router and an ASUS RT-AC3200 router. I followed the Inter VLAN instructions in this Cisco video and it would not work. I created VLANs 2 and 3 and enabled IPv4 routing in the SG350. I left DHCP enabled in the routers and they gave the SG350 VLAN IP addresses. After experimentation and further reading, I used static routes in the routers to direct traffic to the VLAN(s) and everything works. I do not know if Layer 3 should be used, but I left the interfaces at Layer 2. The Cisco videos are uninformative and make if difficult for anyone new to networking. Why not include some useful basic information in the video?

@manojpote3630 3 жыл бұрын

thanku so mach to help me

@Avael 2 жыл бұрын

Am I the onlyone noticing that she is using Windows on a MAC?....

@lokeshsingh1314 3 жыл бұрын

Bought sg350..I have 2 vlans and 1 vlan default have internet ..but the other vlan is not able to reach to the internet..what should I do now?

@CiscoSystems 3 жыл бұрын

Hi there. We recommend that you visit our Cisco Small Business Community where you can post your technical questions for experts and peers to review. Thanks for reaching out to us! community.cisco.com/t5/small-business-switches/bd-p/5976-discussions-small-business-switches

@petsworld3774 3 жыл бұрын

How to find each device of ip address in sg350 switch and how to know ip address of each switch

@CiscoSystems 3 жыл бұрын

Hi there, the following discussion from the Cisco Small Business Switches may be helpful to you: community.cisco.com/t5/small-business-switches/sg350-show-ip-interface-brief/td-p/3824639

@rosssnow8331 3 жыл бұрын

This absolutely does not work on my SG350-G. Started with brand new switch and factory default settings. I can ping across VLANs to each VLAN interface IP, but not across hosts on each VLAN.

@rosssnow8331 3 жыл бұрын

Also to note - I can move the hosts to the same VLAN (I assigned two ports per VLAN), once the host gets the new IP on the new VLAN, then I can ping between hosts.

@itbaljit5444 3 жыл бұрын

not working in sg350 switch i have 5 switch. don't waste your time i do same setting but pc not ping other vlan

@CiscoSystems 3 жыл бұрын

Please reach out to a Cisco expert via email at tac@cisco.com or call us directly at 1-800-553-2447 to get assistance immediately. Feel free to message us with any other questions you may have. Thank you!

@itbaljit5444 3 жыл бұрын

@@diogooliveira7631 yes bro its done, i add static root in my firewall of vlan, then vlan ping working

@itbaljit5444 3 жыл бұрын

Thanks bro