How to calculate the load in slabs and beams? | Load transfer mechanism in building

How to calculate the load in slabs and beams? | Load transfer mechanism in building | Civil Tutor

Рет қаралды 291,396

Күн бұрын

Download our android app for job oriented courses
clpsheldon.page.link/x3kb
In this lecture, I have discussed briefly how to calculate the load in slabs and beams and the load transfer mechanism behind it.
Compiled PDFs👇
store.civiltutorofficial.com
For any framed structure, the total load of a slab includes the Live Load, Floor finishing Load, and the self-weight of the slab. This load is transferred to the beams which provide support to the slab, and from the beams, the load is transferred to the supporting columns. Then from columns to the footings and finally to the soil on which the whole structure is constructed.
The total load of a slab is the summation of the Dead load and the Live Load. The dead load includes the self-weight of the slab plus the floor finish and it is to be calculated as per IS 875 part 1.
Must-have books for civil engineers 👇🏽
The A to Z of Practical Building Construction and Its Management
amzn.to/3HKmjm9
Building Planning and Drawing
amzn.to/3sPztdA
Illustrated Design of Reinforced Concrete Buildings ( Design of G+3 Storeyed Buildings + Earthquake Analysis & Design)
amzn.to/3tD9aGq
Advanced Reinforced Concrete Design
amzn.to/3IRZwGn
Limit State Design of Steel Structures
amzn.to/3pIk1O6
Estimating and Costing in Civil Engineering (Theory and Practice)
amzn.to/3IWcwLq
The mic I use👇🏽
amzn.to/35ejhcN
#rccdesign #civiltutor #loadcalculation
►DISCLAIMER
The information provided in this video is for educational purposes only. The viewer is solely responsible for verifying the information and the use of the information in this video is at the viewer's own risk. The content is not intended to be used for professional or commercial purposes. The application of the information presented in this video on a construction site should be carried out only by a licensed and qualified civil engineer.
This video may contain copyrighted material the use of which has not been specifically authorized by the copyright owner. However, under Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.

Пікірлер: 68

@markdilannyuykonge330 13 күн бұрын

I love the way you made your video and how straight forward it was I understand it so easily thanks

@CivilTutor 2 жыл бұрын

There is an error in the calculation.... You can find the rectified calculation here 👇 drive.google.com/file/d/1X5OFsa0rTTTqMrlf4aTz4SmlJiYIJARi/view?usp=sharing Sorry for the error🙏

@abdulmonimmohamedali9146 2 жыл бұрын

Go ahead, we are benefit from you very much,thanks.

@fredthe52 Жыл бұрын

Yes was an error now is good

@gopalmalapati1446 10 ай бұрын

Gentle man, excellent explanation, hats off to you.

@CivilTutor 2 жыл бұрын

Check out my Compiled PDF 👇👇👇 store.civiltutorofficial.com

@phyohtetkoko929 2 жыл бұрын

Thanks For Teaching Sir

@axatrathod 2 жыл бұрын

Awesome sir 👌🏼👌🏼

@clifforddevoe919 4 ай бұрын

Thank you bro, just freaking thank you😢😢

@gowthamiv4841 2 жыл бұрын

Worth watching..

@BRane-mo9wx Жыл бұрын

Superb sir

@dreampannu2198 10 ай бұрын

great 🤩 truely said, i love to listening this, but i didn't like this for 1day, in the my 4years of college life 😅😇 thank you for this😍

@dashtyswara3277 5 күн бұрын

Thanks

@AlAl-cr7ig Жыл бұрын

Thank you

@travelguide786 2 жыл бұрын

Ok, reminder set

@nasirafridi6013 2 жыл бұрын

Thank you 💗

@EngineeringTech_Civil 2 жыл бұрын

IS-1200 part-01 all clause of earth work measurement . IS-1200 part-01 के सभी क्लॉज इस वीडियो में ।। kzfaq.info/get/bejne/sLl0rK55sMeXqKM.html

@engrxiddig 2 жыл бұрын

Good 👍

@mgovindaraju8034 2 жыл бұрын

Thanks for sharing

@EngineeringTech_Civil 2 жыл бұрын

IS-1200 part-01 all clause of earth work measurement . IS-1200 part-01 के सभी क्लॉज इस वीडियो में ।।👍👍 kzfaq.info/get/bejne/sLl0rK55sMeXqKM.html

@suryasekharlagudu4794 2 жыл бұрын

Thank you 🙏

@CivilTutor 2 жыл бұрын

Welcome!

@darshanshrestha545 2 жыл бұрын

Your teaching is like academic. I’m enjoying; thank you!! Can you also teach how to calculate load on columns?

@CivilTutor 2 жыл бұрын

Sure

@EngineeringTech_Civil 2 жыл бұрын

IS-1200 part-01 all clause of earth work measurement . IS-1200 part-01 के सभी क्लॉज इस वीडियो में ।। kzfaq.info/get/bejne/sLl0rK55sMeXqKM.html

@abdulmonimmohamedali9146 2 жыл бұрын

Actually l want to thank you very much .

@vishakhakale8181 Жыл бұрын

Can u please recheck the formula u use for calculating the load due to trapazoidal section on beam.. Load calculated are very large

@meow0808 Жыл бұрын

Thanks souch

@EngineeringTech_Civil 2 жыл бұрын

Nice video 👍👍👍

@CivilTutor 2 жыл бұрын

Thank you 👍

@amit95gupta Жыл бұрын

THANKS SIR, BUT ONE THING I AM MENTIONING THAT LOAD ON BEAM B6 AND B4 DUE TO BEAM B5 SHOULD BE POINT LOAD,BUT YOU HAVE CONSIDERED AS UDL 33KN/M.

@pranotostb 2 жыл бұрын

Good animasi

@ihsanullah6479 2 жыл бұрын

Thanks.how to draw this in which software?

@engrxiddig 2 жыл бұрын

Please sir make detailing using Autocad

@mbabazirodney2064 25 күн бұрын

What does 1-1 mean. Thanks for teaching

@ibby3849 Жыл бұрын

hey how did you work out the area of the cross section it says 0.23 but not sure how you got this

@sangwoo218 Жыл бұрын

How to calculate if i have water load on all area of slab ?

@vedprakashthakur9175 Жыл бұрын

could u pls tell me sir how to get the formula of. load on B1 due toslab S1

@balabyekubojohnchristom241 Жыл бұрын

What is the formula for getting number of bars from area of steel according bs8110 for Fy=410, Fcu= 20, Because BS8110 part 3 doesn't have table for suchcases.

@abdulzahiraliyi8675 Жыл бұрын

my question is, after we calculate loads on the beam can we use this load for column design or de we have to do another calculation using approximate area method for loads on the column ?

@OGTennyson 11 ай бұрын

Another calculation will be done

@sharmakeabdullahicisman4396 2 жыл бұрын

Sir thank you i wanna how to calculate cantilever slab carreid load and transver to the beam

@CivilTutor 2 жыл бұрын

Will upload soon

@joshuasolamo8697 Жыл бұрын

Hey guys how do you calculate square slab

@shaahidebrahim9968 2 жыл бұрын

Thank you sir, tutorial on load transferred to column?

@baberkhan-lt8br Жыл бұрын

Load due to B5 on B6 will not be UDL as its one end is resting on B6 so it will apply point load on it there.. isn't it?

@ibby3849 Жыл бұрын

hey im a little unsure on something what if the design i have doesnt have beams every side for example my design it has beams only on 2 sides of the inividual structure

@ibby3849 Жыл бұрын

for example i have a b2 and a b1 but no beams on b6 and b7

@brahmaji0098 2 жыл бұрын

Sir if we design 1st slab .. For the project of like g+5, g+6etc How can we take loads of remaining slabs which is the load transfer to 1 St slab Moreover is this for only for ground floor or g+1 ? Pl explain it sir Thank you

@CivilTutor 2 жыл бұрын

The example I have shown here is for a single storey frame to give you the basic idea of how load is transferred in a frame.... I will cover up for multiple stories in a separate video.

@THEONEPERCENTCLUB101 Жыл бұрын

In minutes 8.06 , the load on B3 due to slab S2 = WLx/2 right but why isnt it 2.5 cause the length in beam B3 has a length of 2.5 m. should i substitute ( WLx/2.5 ) or is there anything else. thanks a lot for all this knowledge i am just a bit confused. thank you and have a great day.

@theandroidguy6032 Жыл бұрын

It is one way slab and if the load is example 10kN/m2 The it has to distribute only on two equal beams hence divide by 2

@aravindhsuriyak.s6989 2 жыл бұрын

Sir,Calculation can u make it as pdf and send it sir.. It's or all using for further calculations

@EngineeringTech_Civil 2 жыл бұрын

IS-1200 part-01 all clause of earth work measurement . IS-1200 part-01 के सभी क्लॉज इस वीडियो में ।।👍👍👍 kzfaq.info/get/bejne/sLl0rK55sMeXqKM.html

@mamteshmishra5609 9 ай бұрын

@@EngineeringTech_Civil4:32

@SumanDas-ey8ro 2 жыл бұрын

What is 1-1 ? How did you get the value, i.e., (1-1/2.1 = 0.523)??? Please help 🥺

@CivilTutor 2 жыл бұрын

1 - (1/2.1) = 1 - 0.4761 = 0.523

@rajusimmanuel3285 9 ай бұрын

Kindly the explanation shall be little slow

@dhanbiryadav3124 10 ай бұрын

कोइ भि घरका सारा लोड, कलम के नम्बर मुताविक भाग लगाकर के निकाल सकते है और नहि?अगर नहि तो कैसे निकाले? please explain me.

@pp238 2 жыл бұрын

The last page calculation of the rectified calculation is again wrong. Again span of B4 (2.37+1.0) does not match with 3.6M of B1

@CivilTutor 2 жыл бұрын

Span of B4 = 2.37 + 1 + width of B5 (I.e, 0.23m) = 3.6 m

@pp238 2 жыл бұрын

@sekarramaswamy5111 2 жыл бұрын

Thanks for your design analysis… but the presentation to be modified with conclusions….

@DarvaishBandah 2 жыл бұрын

where did the size of beam and column come from? and do the beams and columns with this size resist the loads u calculated? sir make complete video of loads calculations from roof slab to foundation.

@sathyabalasundaram1801 2 жыл бұрын

Refer below link kzfaq.info/get/bejne/hLxlnpSDz9i0mYE.html

@ygges3407 2 жыл бұрын

it says "given specifications". So you can find the size of column and beams on the structural plan. But if you are the one designing it you will assume the sizes and solve for the whole design if it will (pass or fail) to carry your loads.