Hi everybody! Today we have in the video the replacement of knives on the drum of the Claas Jaguar 860 forage harvester.
During operation, the bolt most likely unscrewed and began to break the knives and the rest of the drum. The drum itself is solid, and nothing happened to it, but everything is sad with knives. In addition, there was a big cut on the inner casing of the drum, because of which I had to remove the drum! Since it was not possible to remove the drum with the loader, I had to do it with the KUN at MTZ 82.1. The process of assembling knives with their own nuances. Knives are right and left. The gap between the blades and the counter should be 2 mm. The bolts were tightened with a torque wrench at 300Nm. And they decided to replace the damaged drum casing!