So we tried to make the clamptite. It kinda works tell me what you think of it.

I've seen that tool advertised for $65, I've seen it made by hand where it takes an entire weekend and $1000 tools to make it. Your's is done in 5 minutes for next to nothing in parts with nothing but the basics in anybodies garage workshop. Brilliant. I want you on my team when the zombie apocalypse occurs.

That's the best DIY solution I've seen yet. The wire wraps work wonderfully and were the industry standard back in the day before hose clamps had been invented. The nice thing is that all you need is a spool of wire and you can clamp any hose size you might run into. One of the keys is to keep the wraps around the hose as close as possible, not spaced out an inch like you have. With such a large gap from side to side, you're allowing a hair more leeway in the wire than you want and it can make for a weaker hold. As you've seen, though, it does hold.

A turnbuckle and a wing nut and my Dremel...you, sir, have rocked my casbah. Thank you much!

I love it when a make project does not require 10K worth of machinery. Thanks and good job.

Well-done instructional video. The Clamptite tool is offered in several sizes for different wire gauges and work diameters, which could be accommodated in the DIY version with different size turnbuckles and corresponding bolt and wingnut sizes.

Love this! I've seen many versions of this tool, but so far yours is the easiest to make and very simple to use. I love it when I can use existing things which are cheap and easy to obtain (like a turnbuckle) and use it for such a handy tool! I'm gonna definitely try this in a larger size for heavier-gauge wire, for mending hoses and fences!

Was in a pinch, at work abroad, million $ per month project ongoing. Major water burst leak onto equally expensive electronic power supply boxes. Thankfully boxes were fine but risky no doubt. Told the team not to worry ill solve it, I just KNEW there was a quick solution to this, was ready to dump whatever money on clamptite overnight fargen ultime express pro shipping, but saw this video. Next morning went to hardware store when they opened doors, bought the goods, €7 total, switzerland prices!! Got to the workshop for tools, banged this out with extreme haste, replaced the hose clamps that they used, 1" dia water hose, water pump mustve been the size of a car but cannot confirm. Huge water supply. 2hrs total to make the tool and change the clamps. In hindsight, it was a shoddy job, but given the time I had it was the best I could do that was coming out of my own pocket. It worked, it worked beautifully, took everything we threw at it, not a single drop leaked (with machine movements inc (not static)) Gave the tool to the inhouse tech that worked at the facility because he was a top bloke. Made three more of this tool each was better and more exceptional than the last as I had more experience making them, again, donated them to friends one who moved to start a farm, indispensible for those application moreso. I stress this... no other clamp system will hold up to this style of hose clamp, water is less compressible than hydraulic, it is fine fine fine for hydraulic. Wire clamp is so good and strong, theres risk of cutting into the hose, let that sink in, if you need more clamp strength, add in more loops, broader the clamp, the more coverage, once around is still 101% coverage. If done right, the hose will burst before the clamp.

Its a great concept and I have the actual all stainless clamptite tool and it works very well. its good enough to replace hose clamps with the proper safety wire. For heavy stuff I use .051 WCS aircraft wire and its actually hard to remove once installed. It's far from a zip tie though

The clamping pressure is in the wire. Use the right wire and you will be able to clamp most any hose as tight as you like. The clamp and wire would be great for any radiator hose or garden hose you wanted. I don't think I would use the clamp on any hydraulic hose except for the return side. I think I would make mine with 3/8" or 5/16" turnbuckle and use a bench grinder to grind the head of the bolt so I could use the extra length and then cut the groove into the end of the bolt.

I built mine a few months ago. I like the simple design of your clamp Tite. On the push end I tapered it to get the loop a little tighter, and to get it a little closer to the tubing. The stainless wire works awesome.

You need to give yourself a lot more credit young man. That is a brilliant DIY solution to replace a simple but expensive tool.

Genial! Love the simplicity of the design from hardware store parts. That wingnut thing is brillant. No mig or fancy grinding. Look forward to make my own.

This project is so simple. Much better than others on internet. Clean and simple.

What's really great about it, the rope tensioner you can get in all sort of sizes, easy to scale it for your exact needs.

I had the exact same observation after I built mine 2 yrs ago. I was using different wire, including Bailing wire with poor results. Then I ordered that Stainless steel wire from amazon one day when I was ordering some other things and it makes a WORLD of difference. Don't judge until you try it with the right wire. I swear it was worth it. Great tool. Handy as heck!

Thanks for the DIY clamptite instructions Before serpentine engine belts , when engine's used several belts I use the same hardware to create a belt tensioner tool, used when installing ALTERNATORs or new fan belts etc.. Cut off the hook and the eye braze on open ended curved pieces of steel, use pieces of all thread and couplers on the NORMAL right hand threaded end to extend the length as needed, many years later and I still have that home made tool in my tool bag

Really clever. As for the not seeing “pressure test” results as somebody mentioned below, this would fair well. The turnbuckle’s purpose is to operate under tension, and this is exactly how it is being used here. Well done!

If you wrap the wire tight and neat when you put full tension on this design it is stronger than a regular hose clamp but yes you have to use high tensile wire. This idea of a hose clamp goes back 70 - 80 yrs, it's actually called an aviation clamp and used by the EAA.

I have studied many of these DIY videos. I even made a lesser version. Yours leaves all the others in the dust! I will easily make this one next. Thank you for the inspiration.

Excellent. You can always put a bar through the eye to help turn it too.

Love the signs hanging in your garage. Thanks for sharing. Solidarity brother.

I have a strange habit. When Im drunk, I watch home made clamptite videos (not even kidding). Not only do I think the clamptite is an amazing invention, because it uses basic mechanics to turn wire into a clamp ... but I think you can learn about lots of countries by the materials and techniques they use to make one of these in the shop. This being said, I reckon your design is by far one of the best, and requires a few basic, cheap components, and very little work. Personally I would guess that if you use MUCH thicker wire, and practice your technique, you will realise your design is actually very good. Thanks for the video.

You did a nice job of explaining in detail what the tool is supposed to do and how it does it. Thanks for the time and effort to make and post this.

I also tried one identical to yours. I think instead of a wingnut, a nut from a draw bolt. would probably be a better choice. The draw bolt nut. Needs holes drilled near each end and the loose ends tied together on top of the turnbuckle. The turnbuckle should be sanded smooth to allow the wire to slip easily. 14 to 18 gauge STEEL electric fence wire works well. The wingnut doesn't have enough area or length to pull the wire. It seems steel wire versions are stronger than screw type clamps and won't cut skin or clothes when finished correctly. This type of clamp is okay for aviation use if aviation approved safety wire is used. Temporarily tying the wire ends together with a wire nut makes wrapping the wire around the workpiece easier before using the tool. Also making the notched end a little more pointed makes for a smaller loop and neater and tighter clamp.

stainless steel fence wire from lowe’s works good and won’t rust !!

I needed a tiny hose clamp for my in-tank fuel pump to fuel filter on my motorcycle, I couldn't find them small enough at the hardware/automotive stores and didn't want to wait for an OEM style to ship. I bought a small spool of stainless steel wire for like $3.50 and started researching how to use wire for a hose clamp and gave this method a try. It's holding up very well for my fuel injection system on a single cylinder 690 Enduro R(lots of vibrations). I didn't have the fancy tool, but made it work using a very small deep socket as the part that pushes on the loop side, I put both wires through the small deep socket then used a 6" 3/8 ratchet extension as a wench to pull the wires tight. The ratchet extension has a small hole on the end that connects to the ratchet and that's where I fed the wires through to start spooling the wench. I used a socket attached to a ratchet to connect to the male side of the extension to help drive the wench action. this got the wires very tight, then folded the wires over with the small deep socket. I probably have about 1000 miles on my bike with two of this style hose clamps holding my fuel injection system together. I'm impressed to say the least, and was pretty happy that I was able to figure out a very simple solution to the fancy tool with out having to fabricate a tool. Really like your tool build, simple and compact. I'll probably make one of these.

You are a gods damn genius. Wish I watched this before I spent 30 bucks on amazon. And I can tell you this. IT WORKS! I bought one specifically to repair my air hose without hose clamps. Holds at 150 psi for 3 months now. Used it on a garden hose as well and also to secure the little rubber sleeves on the end of air and electrical cords that keep em from bending to much at the end but always slide down. I like it because you can still roll up an air hose without cutting yourself. It's almost seamless.

This idea of Clamptite is really cool & good because 1. It is a simple one piece tool 2. It does not require complicated fabrication of anything 3. It uses items readily available 4. It is pretty useful in confined spaces because the other tools require lots of working space for your hands around the tool. THIS IS GOOD 👌🏻 👌🏻 👌🏻 👌🏻

I love it and I am making me one no matter how much I don't need one. It's like climbing the mountain. Use hanger wire and you're good. Boy, you are a genius!

Awesome video. I have watched several of these. This is by far the most sensible and affordable. You don't need anything but hand tools. And even the most expensive turnbuckle is still cheap. As for the wire any quality stainless wire would work. Bottom line it is all affordable. And a better clamp too boot.

Was just getting ready to pull the trigger for a Clamptight tool on amazon for $65.00. I backed up and went searching for something I could DIY and here you are! Excellent. Instant LIKE and SUBSCRIBED! Greetings from Alaska.

Congrats for being able to think outside of the box. Simplicity itself.

I've been checking out a few of tool builds and I've yet to see a pressure test done with this clamping method via the tool . would be intresting to see one

I have been looking at different videos of this tool. I think what you made is pretty damn good. From what I have seen so far, I think the big issue is wire type and size. Number 17 fence wire has gotten great reviews and number 14 fence wire, although stiffer is a good choice. But as far as what you made, ................. it's doable, cheap, and it could get a person out of a bind in an emergency situation. Have a small spool of wire, the tool, and if something goes wrong and a clamp is needed, well, here it is. Thanks for sharing your idea.

It was said much better by someone else: I want you on my team when the zombie apocalypse occurs. Good show!!!

When you get straight A’s at school that means you have a good memory When you come up with these that means you’re smart and intelligent Congratulations

Well explained. I believe such a clamp system is very useful. The battery terminal of my bobcat broke at the cable joint. Desperate to get it going, I tried using a hose clamp, but they were either too small or too large ! So I used wires to tie down the joint. It does work fine. But a tool described here would be perfect. I am going to build one.

Made a version of this design. Really nice and low cost alternative :)

Quite possibly THE BEST wire clamp tool build I’ve seen ! You sir are a genius !

I been searching allot and even tried starting to build one that kind was a hassle. I think this might be the version I build. Compact and nice version

Bailing wire works the best. Easy to work with plus holds a strong clamp.

Rivet gun works good too. You may have to twist the wire ends for the gun to grab the wire.

Way to go, Magiver. That's the way to grab something in your shop and make it work.

Great video. The tool may not be perfect but it does the job, and can be made with commonly found items and minimal tools, Hacksaw and file. I was looking for a video of how to make this tool. Something to keep in the back of your head on how to make if you ever need to. Thanks for the video. Also, in regards to wire, if you can get your hands on thicker gauge lock wire, that should have the tensile strength as well as flexibility. (Ex aircraft mechanic)

Remember that aviation grade stainless steel wire was used, way Beyer ram street use, further, these "clamps" seal way better than worm gear type. In aviation it's always about reliability, reliability, reliability: you lose an engine over one of the mountains or Great Lakes and your life sucks. So, I've read elsewhere unrelated to this clamp system that wire "clamps" place Beyer compression 360° on the house and that's a MUCH better seal. This tool you made with the right wire would work extremely well.

28$ on ebay, free shipping. U did great. These have been used in aircraft for decades. Harbor freight aviation wire in blue containers.

I will make one. However in your demonstration I think you needed to wrap the wire around the wing nut wings then bring the wires together and twist. Without doing this there is too much slack when tightening. I do think your diy tool is very clever though. Thanks

Thats a good tool if u r wanting 2 keep things original on an old build. Thats how they were years ago !

INGENIOUS!!!!!!! I always wanted the actual tool but it was pricy for once-a-year use.

Brilliance in simplicity! Well done

I made this last weekend. Works great! Thanks!

Excellent reuse of common hardware parts. I also just came across this tool and was intrigued by it and agree pay that much money for a simple tool their nuts it could be made so easy and you proving it great job the fact I'm running up to a hardware store right now!

I love the PRO-UNION signage on the walls of your shop. We need a lot more of that in America!

it's a good tool , there are smaller versions of that tensioner . 2 any solid core wire can work . electric copper 1.5 - 2.5 wire . , motor widing wire the best wire is a stainless steel wire 0.6 mm since it will not rust and snap

If you use .041 stainless steel safety wire it works great. You need to use tools with in the correct way for them to work properly.

Fantastic! Telecomm Installers are the best and always comes up with handy tools, especially out in the field and @ data centers.

Heroes capes mate I’m an outdoorsman and I plan on adding 1 or two tops for log tension and this is winning me over toward using it big and clunky tons of gizmos will get ya hurt this is vital

I hope I'm not the 57th person to make this comment, but instead of going through all the trouble of drilling out the reverse thread side, etc- just leave the hooked end in and cutting said hook off, then notching, super glueing, etc, instead putting the bolt in. Does the exact same thing with a lot less modification! (I hope I explained this properly, I'd be more detailed but then I end up writing a book, making my idea even more confusing!)

I think the big secret is the stainless steel wire, reasonably flexible and very tough.

Oh man.... challenge accepted. Now you got my mind thinking! Thank you so much for your creative way thinking of a shout-out!

Wow that was simple. I just had to clamp a nylon hose (very stiff) and none of my nirmal hise clamps worked. So i remembered those infomercials about this tool. Thanks to your "clone" i did not have to postpone my projet by weeks to order the original, just a couple of minutes with an angle grinder and some hardware collected around the shop did the trick :) it works perfectly with aviation safety wire.

From a mechanical point of view, if you make a narrower tip on the end, the clamp will exert a greater and more stable pressure on the fold, as the bent wire ends will not migrate to the center of the clamp loop as far over time.

amazing tool ..briliant idea thank u for demo sharing

Awesome! Been looking into this tool saw a vid of a Russian dude making a nice one but I'm gonna try this, great job!

You rock, have excellent ideas, and work 🎉

Pretty slick man. I'm about to wrap some headers and I'm gonna make one of the these so I can tie the ends. Thanks!

Simplesmente fantástico, fantástico a ideia de usar um esticador como base para a nova ferramenta!!! Fantástico mesmo! Well done ❗️ Abraço aqui do Brasil 🇧🇷

Yes! I’ve seen others that are to complicated to build. This I can do. Awesome 😎

Thanks.from Tashkent.Uzbekistan🇺🇿

I find that the SS wire off of JiffyPop Popcorn works wonders for this. Good vid - Thanks'

Bem mais prático, melhor vidio sobre o assunto que vi na internet.Parabéns ao autor.

Really Clever!…LOVE IT.

You could conquer the riddle of nuclear fusion energy, but you would still be a fool for using a high speed cutoff disc without a guard.

Stainless steel safety wire is what's needed. FYI, I've been using regular spinning safety wire pliers for years to fabricate super small wire hose clamps for lawn & garden power equipment fuel lines and such -- super nice and neat solution. Recently, I've become sick of using worm-gear hose clamps on my repaired pneumatic air tool hoses. The hose clamps catch on everything. So, I get on-line and attempt to find a supplier for inexpensive hose end ferrule swagging dies. Hell, I already have a hydraulic H press, I would just need the stand-alone dies. But, apparently, it's not just as simple as locating the hard-to-find dies. Other stuff needs to be fabricated. Then, I found your turnbuckle base stock tool build. Very nice! This should work perfectly and save a Hamilton or two.

Thanks for an honest evaluation.

I think with the proper Wire it would work just as well it's my opinion

Not bad.....EVERYTHING in materialization that was ever invented started in one persons mind......unless it was a group project!

Great job. Treat yourself to a few rolls of stainless real safety wire (.025". .035", .045" m you'll see why I use them all) as it's extremely handy around the shop even if you never use it to safety fasteners (retired jet mech here). Other wire cannot compare and a roll lasts a long time. There are many different turnbuckles available and I'll be making a couple of your tools.

Very good and yet simple idea

Hey DBT, NICE creation! I'll try to get time to build it! Thanks for your great effort.

Thanks man from La Paz Bolivia. Gone make this tool tomorrow. Very useful. Gracias.

For a 5 minute DIY tool project, this is excellent, and this is likely the way I'll go. A thicker wire guage definitely makes a difference. Also, you didn't clamp anything to anything else and then test how well it performed. My understanding is that this could be used in place of a hose clamp

Sweet you made this build easy for anyone.

I just got a turn buckle today. I'm going to try and make it with the wingnut and cutting the end off without the bolt...!?? I'll let you know what happens! LOL

Good video. Try some stainless steel wire sold by Harbor Freight.

I've been meaning to make one of these tools and yours seems to be the cheapest and easiest to make, i'll be copying your design, Thanks!!

I just ordered the Turnbuckle from Amazon, I will look for a 1/4” bolt and Wing Nut next. My plan is to use 14ga Wire to secure a Cattle Panel to a 4 or 5” dia. Cedar Pole. I hope this works!

cool. cept my time ain't free. $7.00 for the turnbuckle. Then work it to make it what we need. My clamper does work. free shipping used it outa the box. worked well. I tried to make my own too. Ordered one. used it. done.

ill give you a thumbs up on the tool but thumbs down on the wire it needs to be stiff and hold its shape when bent. i reproduced one my grandfather had decades ago and works great you just need the right wire. i fix air lines in the shop all the time and no issues. stainless wire works best IMO.

smart idea, I will make one up tonight thanks for sharing

Man i watched that video of that tool and said shit 60$ for that thing? Gotta be another way.. and sure enough here your video is. I think if I modified your method a little bit id be on to something! Thanks for sharing 🤘

Good job. I made one. Didn't have any rubber hose to test it on, so it tried it on my ****. That really hurt! Used quite a bit of wire... 😜

Genius !!!!... You just saved about $70. Keep up the good work.

You're going to need .040 to .050 gauge wire for typical hoses. I've watched several dozen videos on these and yours is the "most doable" for most people. I wish you had shown the final product up close after the fast forward and before you used it. But I think most people will get the gist of it!

Anything home made is worth a try good job love the idea

EXCELLENT, no stuffing around, just do it

Matur suwun mas 'e ilmunya bermanfaat.,👏👏👏👍

guys im passing the knowledge forward have fun great vid

Have you tried a coat hanger wire? That’s one they said they can use theirs on. Be interested to see if that would work