Thanks, that's why engaging a spring is a nightmare in tight places. I didn't assemble in the right order. You have helped a man whose 1st choice adjustment tool = a HAMMER. There's so much to learn about the right way to do things. Thanks again. PS, don't worry, I only work on my own horns.
@skullring19684 жыл бұрын
Thank you very much for the video. I have completely restored my daughters clarinet that she has used for the past 8 years or so. She is now in the University of Alabama Million Dollar Band and will have this one back on the field in a couple of weeks. Very good thorough instruction. Thanks
@smokingjazz50673 жыл бұрын
I cannot thank you enough. God bless you from Italy Rome Ostia Lido
@bindig14 жыл бұрын
Great video. I completely dissasembled and reassembled a 1972 Bundy 577 for my granddaughter. Cleaned every thing inside and out, metal polished the keys, replaced the pads and cork. Like a brand new clarinet now and sounds great. Would have been a lot harder to do without your video. Thank you !!!!
@carlosacarter3 жыл бұрын
Mr RTC Canvas, thank you for this no-nonsense demonstration.
@theyazzledazzle4 жыл бұрын
Hi there! Just wanted to say thank you so much for this video! I bought a metal clarinet to restore, and I know nothing about clarinets, so this was immensely helpful!!!
@theyazzledazzle Жыл бұрын
@Freak array I got stuck when a pin wouldn't come out. I have to drill it out or something, and got sidetracked. But I definitely want to return to the project sometime.
@theyazzledazzle Жыл бұрын
@Freak array thank you, new friend!!! good luck on your project too! come back here and let me know how it turns out!!! :D !!! (I wish youtube had a messaging function!)
@hfwilke5 жыл бұрын
Thanks for this video. Using this and a pad replacement video, I was able to replace a pad on the clarinet I got my daughter from Goodwill. Yeah for a now working clarinet.
@smokingjazz50673 жыл бұрын
Could you give me the link of the pad replacement video. Thanks in advance
@hfwilke3 жыл бұрын
@@smokingjazz5067 I don't remember which one was the best, but these are the three in my watch history: kzfaq.info/get/bejne/qLVde6yLl9vcook.html kzfaq.info/get/bejne/rcxka7l5udOthJc.html kzfaq.info/get/bejne/rtaPibqfv77PoYE.html
@LowryYT6 жыл бұрын
It is unprofessional to bleed on your instrument, dude I love how you deliver your jokes
@tomackerman29006 ай бұрын
Thanks so much for this detailed video. I just completed my 4th overhaul by following your instructions. Not sure if I missed it, but I always clean all the rods/pivot screws and use a very fine synthetic oil on them when assembling the clarinet. Cheers!
@mohamedbahaeddineferchichi51054 жыл бұрын
Didactic and subtly funny presentation ! Thanks for this rigorous protocol !
@rodsalvage71215 жыл бұрын
Fantastic video. Just taken a clarinet apart and reassembled. Very satisfying. Use a decent screwdriver though.
@mani68755 жыл бұрын
This has kept me alive
@BusanBen3 жыл бұрын
I followed your steps and just padded a Noblet metal clarinet with black roo pads. Sounds great. Thank you so much for making this video for us!
@SolsGarage3 жыл бұрын
Thanks! Figured it was about time to clean the body of my clarinet.
@greeneyedbeauty50 Жыл бұрын
Amazing video!! And easy to follow! Thanks 👍
@libbyl2203 Жыл бұрын
This was a life saver!! Thank you for your time.
@lambertj.28923 жыл бұрын
Excellent video!! Thanks for sharing your knowledge of this process. Immensely helpful.
@fritzer51513 жыл бұрын
Excellent instructional video! It would be great if you did a video on oboes. Players would be indebted to you.
@francistaylor50973 жыл бұрын
What a superb video. Thank you so much for teaching me loads.
@chittaranjansarkar40813 жыл бұрын
Excellence work. It gives a concentration to the work phenomenon. Thanks
@charbaker3 жыл бұрын
What a treasure of information!
@deadlyfreckle2 жыл бұрын
thanks, great info. figured out where one of the needle springs should be hooked
@tamarawesterman50842 жыл бұрын
Thank you for making this video. It was very helpful!
@darvishkhan14472 жыл бұрын
Hi my master. you are very very good to lerne .thank you again.and hope to sea you.
@darvishkhan14472 жыл бұрын
Thank you very much for the video
@RockStarOscarStern634 Жыл бұрын
This would be super cool to also do on a Yamaha Low C Bass (Tenor) Clarinet cause while it plays like a Clarinet (you have to turn your hands vertically cause they're curved to make it more compact) there's some interesting mechanisms.
@KJ7JHN2 жыл бұрын
thank you.
@tia80995 жыл бұрын
ok now I want to take my clarinet apart but it's almost midnight
@tia80994 жыл бұрын
update lads: I took it apart at not midnight
@h0rcrux7744 жыл бұрын
and it took 6 months lool
@DuGOization4 жыл бұрын
Tanks man!
@nickyFan2 жыл бұрын
THANK YOU!!!!
@x000s23 жыл бұрын
Hmmm, I think I can do my own clarinet restoration now!
@jacobriley51504 жыл бұрын
Does anyone know what screwdriver he uses? I looked up allied screwdriver#4 and I don’t find one like his
@ImtherealAddison5 ай бұрын
One of my top three trill keys broke off because I dropped it. Is there anyway to fix it?
@leedchristensen Жыл бұрын
do the hinge rods need oil or anything?
@MrRjjazz4 жыл бұрын
How do you get really tight screws out? I am having trouble with the lower joint keys.
@sarahamira57322 жыл бұрын
Maybe try using some key oil if you're still having this problem, work the key for a bit to get the oil in there. I wouldn't try and force it tho
@trptguy232 жыл бұрын
Replacing a pad on the b key on the lower joint and screwed something up. I think the springs were not correct. The low e/b key is stuck closed
@likelyllek4 жыл бұрын
14:50 lower joint
@sapphire1nk2903 жыл бұрын
I need to do this so I can clean my keys but I'm scared cause its provided by my school
@lionelpaz26826 жыл бұрын
What if the screw does not want to unscrew? It is very stiff.
@Megadude-kc6rt5 жыл бұрын
Lionel Paz apply some pressure on the screw using the screwdriver for a period time then slowly turn the screwdriver, it should come off by doing that.
@markowalski13 жыл бұрын
You sound like Sam the Cooking Guy
@amberfun9148 Жыл бұрын
You’re right 😂 We are better than that
@judeeyton1232 жыл бұрын
you're better than that... lol
@Jail-Left-Wing-Traitors4 ай бұрын
Yaawn 🥱 the most boring, monotonous voice on the internet 🙄