I did this exercise myself a year ago, not having seen your video, and ended up going through exactly the same process and issues. the Fill surface with spline guide curves really works best. Well done.
@MikeBurke8885 жыл бұрын
Very good. You call also bring the first attempt back onto the midpoint, with a fullness control, but it's a worse result. On thing you may not know is that when multiple copies of these are arrayed in the desired pattern to produce a lattice the edges still aren't tangent. You've piqued my curiosity with this video, and I've tried a couple of ways with only minimal success, thus far.
@ClassASurfacing5 жыл бұрын
Correct, the Fullness Control on this is a little messy. Their is also N-Sided Surface which was not pretty as well. I have not seen Tangent edges on any version thus far unless it was made using STL data. I will figure out a method for surfaces but it will be tricky. Cheers!
@23chaos233 жыл бұрын
SPLINES, omg yes, im going to try it ou in Inventor and see if that solves the error I get when later trying to boolean the gyroid with other geometry. Thankyou, BTW this is the only CAD related gyroid video ive found so far.
@shanedeters55715 жыл бұрын
Very nice
@freisnz5 жыл бұрын
instead of arcs, use formulas that are much closer to a gyroid, such as y=atan(sin (t*360))
@ClassASurfacing5 жыл бұрын
Not all CAD systems support the making of a body with a formula. NX does have that capability but, it will be a convergent body. This is a simple non-formula method and can be thickened and 3D printed.
@brucortacans91375 жыл бұрын
GENIUS!!!!!
@maestrue85 жыл бұрын
is it NX12.0.2? I see a new style of the sketch icons and this feature, is like a make current operation
@GiacomoLionello5 жыл бұрын
It's NX 1847, they change from major release to continuous updates. The name from now on will be only Siemens NX. I read somewhere that 18 is the year of release and 47 the week.
@maestrue85 жыл бұрын
@@GiacomoLionello what? google dont know about siemens nx 1847
@OktoPutsch5 жыл бұрын
@@maestrue8 It's available on GTAC (Global Technical Access Center)
@ClassASurfacing5 жыл бұрын
Giacocmo is mostly correct. 1847 is the year Siemens, as a company, was first founded.
@puhumight5 жыл бұрын
ıs there any one who can share gyroid geometry the file ? Thanks in advance
@IronMan-yg4qw4 жыл бұрын
what is the arc diameter??
@23chaos233 жыл бұрын
the arc height is 1/4th length of the side of the cube