www.ClassicVWbugs.com This is the 2nd part video on Seat Upholstery, this time the rear seats! Chris Vallone
Пікірлер: 53
@1uptospeed9 жыл бұрын
now thats music to reupholster by ! you guys make it look ez. i guess its just farther & son teamwork .thanks chris for all you do.
@vc50106 жыл бұрын
thanks for putting this video i was wondering if i can do this myself on my 61 now i know i can love all your videos great job.
@classicvwbugs6 жыл бұрын
you are very welcome! Thank you.
@Openairgarage9 жыл бұрын
Thanks for doing this video, it helps me to see how to attack this project.
@pattysherwood70919 жыл бұрын
Sehr gut, Chris. Danke.
@jimmd539 жыл бұрын
Another good Video Chris, well done....and again, thank you for the knowledge. Jim Semertzides
@classicvwbugs9 жыл бұрын
Thanks Jim!
@Bostonclassics18 жыл бұрын
Awesome video. Much appreciated
@bons5629 жыл бұрын
So nice an easy. Like 👍👍
@BeetleJuice19806 жыл бұрын
dear Chris , I havent found any video about seat belts, so i throw my question here : do you have any idea how to restore the vinyl sleeve to the cable that is mounted to the central tunnel, where the seat belts go( next to the emergency brake)? sure we can use heat shrink but its not the same thickness and quality. it seems that the steel cable was "dipped" to vinyl (?) at the factory, I don't think they had "heat shrinking vinyl" back to the 70's. thank you !
@alexanderglz569 жыл бұрын
thanks guys...
@thomasmunstermann7195Ай бұрын
1.a.männer liebe alte käfer hatte mal einen 1972 er. ❤ Chopper
@scoth5135 Жыл бұрын
Another question chris, I have a 65 ghia, the seats are a bit different, the seat covers I got are from Tmi, they don’t slide over back frame, they just wrap to the upper and side bars, there is a piece of thin cardboard that covers the back to cover springs, i cant find a part for this, it bc also has piping on the edges, something I have to make possibly?
@trevcessna17236 жыл бұрын
Hey Chris, why use burlap instead of the felt as with the seat bottom? I'm mid process, all seats stripped and power washed, sanded and painted, doing front seat now. Great video! Thanks.
@classicvwbugs6 жыл бұрын
either one works. Sometimes I use felt too.
@rickwilliams53896 жыл бұрын
Chris, I love the music...more soothing than the radio...where did you find it? Also...I am ready to restore my seats. springs are de-rusted and everything straight. Painted the springs and frames and have new horsehair, padding and jute. Do you still recommend the one inch of foam?? Also, my seat lays down and has a hard backer covered with carpet. Do I just do the seat as you did and add the backer with the carpet when I choose what I will be using? Thanks...love your videos! Rick Williams in Port Orchard, WA
@classicvwbugs6 жыл бұрын
No if you have the new horsehair, you will not need the foam, it's either or. Just follow these steps in the video and you are good to go.
@HoboHeaven6 жыл бұрын
Music is Dick Dale, 60s Surfmusic
@julieulloa53143 жыл бұрын
Please help, I'm restoring seats for a 77 SB Vert, I'm not at all sure how to re-wire the top backs. Front seat back rest knob has no tension when i move the lever. Do you have a diagram of how to re-wire the unit?
@Its_about_that_time2 жыл бұрын
All my tabs on my rear seat are broken. What can I do
@scoth5135 Жыл бұрын
Hey Chris, great stuff, What is the plastic sheeting for? Is it necessary?
@classicvwbugs Жыл бұрын
Just to help make the material slide over the foam. Without it, it will grab, making is tough to pull down.
@aimeeh17648 ай бұрын
Do you pull the plastic out before clamping the cover down?
@rickwilliams53896 жыл бұрын
Chris, my seat cover for the back, shown in this video does NOT cover the back. Rather, it is open and requires the hardboard backer that is covered with carpet and has the cotton strap and buckle. It has a 9 inch flap of carpet attached on the bottom with a pocket sewn in for the metal stiffener as a bridge between the seat bottom and the body floor. I am sure that you know what I am speaking about. Well,...,the real question is do carpet kits have these two precut and edging as part of the complete kit?
@classicvwbugs6 жыл бұрын
yes they do
@saiesafari96406 жыл бұрын
where do you buy the cover at ??
@VwErik889 жыл бұрын
Hi Chris, im gonna do this widh my 55 Beetle soon, I just wonder, can i skip the Rod pice ?
@classicvwbugs9 жыл бұрын
VwErik88 Which rod?
@VwErik889 жыл бұрын
For the front seats and rear seat as you take out :)
@classicvwbugs9 жыл бұрын
VwErik88 ah, kinda need them
@VwErik889 жыл бұрын
Okay thanks Chris !
@scottmagyar6 жыл бұрын
Chris what kind of paint do you use on seat frames and springs before you reupholster .
@classicvwbugs6 жыл бұрын
Did a video on it kzfaq.info/get/bejne/a71im9idtd64nYE.html
@danielheinz81344 жыл бұрын
I had them sand blasted and powder coated, will last a veryyyyyyy long time. In expensive as well.
@aurelinobulcao2 жыл бұрын
👏👏👏👏👏👏
@neftalilomeli8474 жыл бұрын
What kind of plyiers are those?
@xsavierneogeo15697 жыл бұрын
any hope for a 72 sedaN
@alfonsoc.22915 жыл бұрын
Hi Chris, what’s the difference between velour and tweed? is better to use vinil?
@classicvwbugs5 жыл бұрын
Just different fabric textures, velour is like a very soft fine hair, and tweed is a woven tougher material. Should be on google.
@classicvwbugs5 жыл бұрын
vinyl is ok, but cheap.
@jonathanbruce9658 Жыл бұрын
Chris is that foam 1 in thick?
@classicvwbugs Жыл бұрын
Yes 1" high density
@ThomasFMPayne9 жыл бұрын
We are doing a 73 Super. Wouldn't you know that my DVD player crapped out. This is not what I need. I need the new rear seat back instructions! I can't remember the sequence for the spikes
@hectorzapata42959 жыл бұрын
Isn't the "horse hair" padding what gives the Bug that particular interior smell?
@classicvwbugs6 жыл бұрын
yeah when it gets old
@danielheinz81344 жыл бұрын
@@classicvwbugs aka, also known as fire starter lol
@classicvwbugs4 жыл бұрын
@@danielheinz8134 for sure yeah
@danielheinz81344 жыл бұрын
@@classicvwbugs I called you guys the other day about resto on my 65 sedan vent windows. No worries though, I am having dougs bugs do it here in az.
@timroller6431 Жыл бұрын
How thick does the foam need to be?
@classicvwbugs Жыл бұрын
1" high density
@AlexCamacho7 жыл бұрын
Where can I purchase jute from and what size hog rings are you using? Awesome video by the way! Thank you for providing all this great content. :)
@classicvwbugs7 жыл бұрын
Carpet stored or VW parts suppliers like cip1 or jbugs or sewfine
@emmaziegler66476 жыл бұрын
Ive never seen a vw with horse hair ,coconut fibre and cotton waste yes,maybe in america