Clean up buddy with micro mat clean up sluice review by prospectors dream

No video

Clean up buddy with micro mat clean up sluice review by prospectors dream

Рет қаралды 12,763

802 Outdoor Adventures

Күн бұрын

Пікірлер: 63

@WildKatProspecting 9 күн бұрын

This little guy is right up my alley! It has everything for me that "home" prospects. Thanks for showing this! Santa will be notified! Lol 😊

@802OutdoorAdventures 8 күн бұрын

Just an fyi, he is now selling the new version with the gap that is behind the mat is all filled in. Now you have even less material to pan out than you did before.

@heithdotysadventures7824 4 ай бұрын

I have seen a few ppl use this thing now and I like it more and more each time I see it used . 👍

@802OutdoorAdventures 4 ай бұрын

I was really impressed

@GSProspecting 4 ай бұрын

Cool setup indeed fam. Keep on having fun getting that Au and living the dream. Gold Squad Out 🤠

@AquaDonkeyProspecting 4 ай бұрын

We bought one. Had to trim the mat because it didn't fit right. A real speed controller would be a plus also. I like my toolbox sluice better Nice video though!❤🎉🎉❤

@northeastexpanse 4 ай бұрын

Cool new toy brother!

@brianquirion7062 4 ай бұрын

I just ordered one I have a lot of experience with dream mat and really liked your review on it these dream mats really don't lose any gold as long as you run them at the right angle and don't over feed them to much but great video

@coreymerrill3257 4 ай бұрын

Dream mats are about the best there is . They have a few designs and many sizes of matting on their website. I have seen ALOT of people using them over the last few years it's a small wonder anyone uses anything else. I bet some silicone calking would fill that gap no-sweat. But maybe talking to the designer about it could also present some solutions . Awesome video !

@GameOnFitness11 4 ай бұрын

Just purchased mine! Cant wait

@aaronlbuchanan9861 4 ай бұрын

Call it a toy if you want to, it looks like it would be fun to run. Thanks for sharing.

@TheDSP1970 4 ай бұрын

Awesome! thanks for the review!

@802OutdoorAdventures 4 ай бұрын

Good product, fun to use it.

@paulk-yo4tb 9 күн бұрын

You can use a wet paint brush to wipe out the air bubbles, old trick I learned along the way ..

@lillarry2352 Ай бұрын

I bought one. To fix that gap up top I radiused the bottom side of the mat to match with a razor blade. Then shoved it up so the gap is at the bottom and it almost eliminated all of that.

@802OutdoorAdventures Ай бұрын

Interesting fix.

@indianagoldgetterscottie Ай бұрын

right on thanks for the show n tell

@goldensadventures1229 4 ай бұрын

Never saw one before but I want one 😂

@802OutdoorAdventures 4 ай бұрын

It is worth it.

@AquaDonkeyProspecting 4 ай бұрын

I have one. I like my tool box sluice allot better❤🎉🎉❤

@auroraprospecting 4 ай бұрын

Nice video... kool piece of gear💯🇺🇲⚒️

@mandybrown7758 4 ай бұрын

What a beautiful Kitty 😺

@bjvoorhies 20 күн бұрын

Good test - better quality/believability than the ones from the "vested interests". Thanks.

@802OutdoorAdventures 19 күн бұрын

@@bjvoorhies thank you, that means a lot to me.

@WeBoondock 3 ай бұрын

Mine is on it's way.. As for the Gap at the top, I will try a piece of duct tape to extend over the gap and over the top of the mat and see if that solves the issue. Thank my friend!

@jayaar5978 4 ай бұрын

At the end of your run, angle your spoon into the feed chamber and into the "gap" you don't like above the Mat. If you do it carefully, a little at a time and side to side, you might be able to wash out most of the black sand and retain most of the gold there. Just have a pan at the end to catch the sluice tails. Cute rig at a good price!

@802OutdoorAdventures 4 ай бұрын

good idea, I will try that.

@nunyabisnass1141 4 ай бұрын

From what i see, that top guard/funnel focuses too lich material into the center, which will fill up the cells there mich faster than the edges.

@mandybrown7758 4 ай бұрын

Now that is neat, i have to check that out sweet

@BPeterson730 4 ай бұрын

I think if you were to modify it a little, it might sluice more consistently by running the cons evenly across the top. It looks like in the video most of the cons stay close to the middle of the mat. I’m thinking about cutting my top lip off so I can sprinkle those cons in more evenly across. Seems like the lip is narrowed down a bit much. Also, maybe try using Marine grade Epoxy to fill in that upper cons catch you identified that was plugging up. Cheers and thanks for the review! I can’t wait to see what their generation 2 will be like.

@802OutdoorAdventures 4 ай бұрын

I'm probably not going to modify this one but I may buy another one and experiment. If a gen 2 model comes out I will get my hands on it and give a go. Thanks for feedback.

@sanchopanzaandsonnycrockett 4 ай бұрын

Yes, yes, yes!!!!🎉😊🤠👌🇵🇷

@mariodibenedetto4160 3 ай бұрын

Seems like theres alot of material on top under the mat, WOW

@sanchopanzaandsonnycrockett 3 ай бұрын

I bought 2

@sanchopanzaandsonnycrockett 3 ай бұрын

Like that, Brother 802nd🤠👌🇵🇷

@jeffklein602 4 ай бұрын

Could you bevel the bottom of the mat so it slides up that last quarter inch?

@802OutdoorAdventures 4 ай бұрын

I suppose that would work if the mat was longer. doing that with this set up will just leave a gap at the bottom.

@josephbossie5232 4 ай бұрын

You need more toys!!!😂😂😂😂😂

@sanchopanzaandsonnycrockett 4 ай бұрын

Outstanding video🎉👌👌🇵🇷

@dougosgood3437 4 ай бұрын

What size are you cladding to for thev clean up buddy.

@sanchopanzaandsonnycrockett 4 ай бұрын

Good tips!🎉🤠👌🇵🇷 10:22

@thevikingwolfpack836 4 ай бұрын

What's the wattage on the pump

@rodkenton543 2 ай бұрын

Have you panned the stuff caught in that top cavity separate from the mat?

@802OutdoorAdventures 2 ай бұрын

I have not but that is a good idea.

@stanlande3753 2 ай бұрын

What is the most material you will generally run before you do a clean out?

@802OutdoorAdventures 2 ай бұрын

If im using a gold trap I will clean out after a=every bucket I run or about every hour if im shoveling right into it. I just like to see what im getting as i go. Gives me more cons to play with as well.

@TroubledOnePaydirt 4 ай бұрын

I ordered the grey one with the blue mat, they sent me the same one you have. Not huge deal, I know but still, kinda of annoys me … lol…

@802OutdoorAdventures 4 ай бұрын

That is a bummer. You should reach out and let them know.

@okiedoke6373 4 ай бұрын

Thanks for posting

@user-wg2nk3sx4x 4 ай бұрын

Cut the edge at an angle, it shouldhelp

@briancharette4980 Ай бұрын

i wonder if it will catch micro flour gold

@802OutdoorAdventures Ай бұрын

We will have to talk the flour gold guy into testing it.

@briancharette4980 Ай бұрын

@@802OutdoorAdventures would be nice to know before i decide to buy one

@briancharette4980 Ай бұрын

so...has your guy tested it with flour gold?

@802OutdoorAdventures Ай бұрын

@@briancharette4980 not that i know of

@auca 4 ай бұрын

is for children

@cjhays6717 4 ай бұрын

It's not a Gold Buddy. It's a Cleanup Buddy

@802OutdoorAdventures 4 ай бұрын

oh yeah, good point

@elevated1 4 ай бұрын

88 bucks for a 3d print. They saw you coming.

@nunyabisnass1141 4 ай бұрын

That's not all that bad so long as it works reasonably well.

@kentfackler1997 4 ай бұрын

That is a toy for someone that dos't really prospect large buckets of cons !!

@802OutdoorAdventures 4 ай бұрын

That is correct. I probably should have made that more clear who it's for. Thanks for your input.

@oDIRECTORo 3 ай бұрын

Sus, no fucking way he's finding nugs like this. 100% this is an ad for his buddy.