Cleaning and repairing an old Gardena garden sprinkler

No video

Cleaning and repairing an old Gardena garden sprinkler

Рет қаралды 35,574

Күн бұрын

#restoration
In today's episode, I'm repairing an old garden sprinkler made by the German company Gardena. This company is known for its garden tools and supplies. Something inside is broken. First everything is disassembled and cleaned. Then the metal parts are polished to a high gloss. The damaged area is glued and reinforced with your copper plate. Then everything is reassembled and tested. Everything works fine again.
Please also take a look at my other videos! Thanks for watching, see you soon!

Пікірлер: 22

@xosferens 2 жыл бұрын

Thank you, this is exactly what I was looking for!

@bobby7739 Жыл бұрын

Thanks for sharing. I wasn’t sure how to disassemble mine to realign the area the arc covers. Saved me £20+ on a replacement

@Skans-Gustav 3 жыл бұрын

Really great details on how to disassemble and am impressed by your cleaning and glueing.

@repairrestore3293 3 жыл бұрын

Thank you very much!

@rdctwens 2 жыл бұрын

Great detail as many have mentioned. I skip the details though to get to just the basic disassembly, repair and reassembly. Not interested in seeing the faucet get turned on for example.... But appreciate your effort and it did help me with the spring and spacer - thought I was being careful but assembled mine wrong first time. Thanks again, I know what it takes to make these videos.

@gh50hill1 Жыл бұрын

Great video, thanks.

@krahaborowski Жыл бұрын

Thanks, hopefully this will help do repair unbranded clones of this, that are looking almost identical. These work very well for a season and then most of them either stop moving or clog up, but not both :D These have actually better nozzles, some kind of pressed in inserts, not just holes in a pipe. I'm cleaning them with small round files that are meant for cleaning of acetylene welding nozzles.

@petermk2992 3 жыл бұрын

Good Job 👍

@repairrestore3293 3 жыл бұрын

Thank you very much!

@RestorationAustralia 3 жыл бұрын

Well done.

@repairrestore3293 3 жыл бұрын

Thank you very much!

@evamohlin1693 2 жыл бұрын

Thanks! I took mine apart but couldn' t put it together again.

@ihsanadalsoy4273 3 ай бұрын

Teşekkürler ❤

@paulglastra1 Жыл бұрын

Thanks for sharing!, mine is leaking alot... Can't find the reason why 😕

@micbyte 2 ай бұрын

Great video I have a newer one called aqua zoom it’s plastic but the same thing broke the little plastic piece that keeps it oscillating where to stop etc. I am not sure if I have the whole piece but I’m going to try with my heavy duty glue. Thanks!

@DocECS69 2 жыл бұрын

great video very helpful

@danabel9746 3 ай бұрын

Supeeer!!!❤

@Lacccikapitany 12 күн бұрын

Hi! I'm no diy expert, and the same pin broke on mine - aaand I lost the upper half. Do you know if it can be found online, or can you give me its dimensions? If it can be 3d printed I can ask someone to do it for me. Thanks a lot!!

@seakyle8320 2 жыл бұрын

What is the broken pin used for?

@rdctwens 2 жыл бұрын

Keeps the main body from rotating all the way around. Keeps it clocked/indexed within the left/right functional range. It either gets broken from age or being stepped on, in my experience.