Cleaning the Dema Valve

Рет қаралды 2,567

7 жыл бұрын

Пікірлер: 15

@diamondnthedirt7499 7 жыл бұрын

I'm needing help my dema valve won't allow the excess hot water to the waste tank I'm cleaned it 5 times but it's a little differ than this style I have a older dema valve on mine ! Any help would be great my unit works great but without it pumping out the excess hot water it's not safe for me to use because the temp rises quick any help would be great

@ASKPrint 7 жыл бұрын

It feels like I'm only getting 150, than at times I get really nice heat. My Truckmount only has 135hours.

@ajmarketer 7 жыл бұрын

you need to add a little giant or a northstar to it since it only has a single heat exchanger. the motor is smaller so it's not going to create as much heat as a bigger motor with a dual heat exchanger on it would

@SuperLightningTruck 7 жыл бұрын

Thanks for video. What is part maker and part number I need when replacing this valve. Is this the same dema valve u use for all your truck mounts?

@ChemTexManufacturing 7 жыл бұрын

The actual manufacturer is DEMA. The model is 453P

@tamarapimentel8734 6 жыл бұрын

Can this be done with the panther 20!

@ChemTexManufacturing 6 жыл бұрын

Yes, this can be done to any Panther that has a Dema Valve.

@ASKPrint 7 жыл бұрын

Is there a way to get more heat on a panther 14?

@ChemTexManufacturing 7 жыл бұрын

What temp are you currently getting? The Panther 14 is only a single heat exchange unit, so depending on what temp you are reaching, this could already be maxed out.

@carpetcleaningogdenutah8850 5 жыл бұрын

yes there is. you need to add a blower preheater...that will preheat the water so it isn't ice cold before entering the engine exhaust heat exchanger. i did it on my 33 blower 13hp machine. i get super heated water. 200 degrees plus

@tamarapimentel8734 6 жыл бұрын

I cleaned it out and everything seems to be fine but I'm losing too much hot water into the waste tank if I put a shut off valve from the waste tank to the water hose can I slow that down

@ChemTexManufacturing 6 жыл бұрын

I'm going to get with my technician and see what else this could be. I'll ask the shut-off valve as well. Have you tried cleaning out your jet and filter in the water box and/or recovery tank?

@tamarapimentel8734 6 жыл бұрын

Chem-Tex Manufacturing I did everything cleaned out the water box cleaned out the filters every filter I changed the oil I checked the Heat exchangers I even descale it

@mikeb359 Ай бұрын

@@tamarapimentel8734i know its been a few years but was your problem a faulty thermal relief valve?

@mikeb359 Ай бұрын

@@tamarapimentel8734i know its been a few years but was your problem a faulty thermal relief valve?