Cleaning Watchmakers Lathe 8mm Collets.

Рет қаралды 1,930

3 жыл бұрын

Cleaning Watchmakers Lathe 8mm Collets... In this video we look at the process I took to clean some 8mm WW collets that are used in my IME Watchmakers and Unimat SL lathes.
~~~~~~~~~~~~~~~~~~~
𝐒𝐄𝐑𝐈𝐄𝐒 𝐏𝐋𝐀𝐘𝐋𝐈𝐒𝐓.
✦ I.M.E. Watchmakers Lathe - • I.M.E. Watchmakers Lathe.
~~~~~~~~~~~~~~~~~~~
𝗖𝗛𝗔𝗡𝗡𝗘𝗟𝗦 𝗢𝗡 𝗧𝗛𝗘 𝗞𝗡𝗔𝗖𝗞𝗟𝗘𝗥’𝗦 𝗪𝗢𝗥𝗦𝗞𝗦𝗛𝗢𝗣 𝗦𝗧𝗜𝗖𝗞𝗘𝗥-𝗕𝗢𝗔𝗥𝗗.
✦ Sticker-Board Playlist - • KZfaq Channel Sticke...
~~~~~~~~~~~~~~~~~~~
𝗛𝗢𝗡𝗢𝗥𝗔𝗕𝗟𝗘 𝗠𝗘𝗡𝗧𝗜𝗢𝗡 - 𝟮𝟬𝟮𝟬 - 𝟮𝟬𝟮𝟭.
✦ PGS - / @pgs8597
~~~~~~~~~~~~~~~~~~~
𝐔𝐒𝐄𝐅𝐔𝐋 𝐋𝐈𝐍𝐊𝐒.
Here are links for many items used in The Knackler's Workshop.
Books.
✦ Gears and Gear Cutting - amzn.to/3mxZKbN
✦ Milling Operations in the Lathe - amzn.to/3iHyg2f
✦ Vertical Milling in the Home Workshop - amzn.to/3Fjuypg
✦ Zeus Book - amzn.to/3zX8KvO
Camera and Filmmaking Equipment.
✦ GoPro Hero 7 Black - amzn.to/3uwFQBD
✦ GoPro Hero 7 Black Charger - amzn.to/3B2EctS
✦ Olympus PEN F Camera - amzn.to/3B2TNJT
✦ Olympus M.Zuiko 14-42mm Lens - amzn.to/3Fb2DYF
✦ Olympus M.Zuiko Fish Eye Lens - amzn.to/2Y5qQhY
✦ Olympus M.Zuiko 17mm Lens - amzn.to/3D1Zc4H
✦ Olympus M.Zuiko 25mm Lens - amzn.to/3iq9t2J
✦ Olympus M.Zuiko 30mm Lens - amzn.to/3A5wRIN
✦ Olympus M.Zuiko 40-150mm Lens - amzn.to/3iqXhyH
✦ Audacity - www.audacityteam.org
✦ Inkscape - www.inkscape.org
✦ OpenShot - www.openshot.org
Consumables.
✦ 3-in-1 Oil - amzn.to/3iqJUhQ
✦ Brasso - amzn.to/3kX4Hv3
✦ Dykem Layout Fluid - amzn.to/3l0L0m4
✦ Loctite 603 - amzn.to/3A0pUbK
✦ Union Jack Coffee Mug - amzn.to/3D7Upyu
✦ WD40 - amzn.to/3olrxPi
✦ Workshop Biscuits - amzn.to/3D71lvT
✦ Workshop Coffee - amzn.to/3l2GvHR
Hand Tools.
✦ Machinist Calc Pro 2 Calculator - amzn.to/3iqwbry
✦ Moore Wright Calipers - amzn.to/3l4BIG1
✦ Norton Sharpening Stone - amzn.to/3l1Pd98
✦ Randy Richard Scriber - email: RRINTHESHOP@GMAIL.com
✦ Workshop Knife - amzn.to/2YaQ8M9
✦ Workshop Torch - amzn.to/2WZTOjd
Machine Tools.
✦ Adept No 2 Shaping Machine - www.lathes.co.uk/adeptshaper/
✦ BCA Jig Borer - www.lathes.co.uk/bca/
✦ Deckel SO Single Lip Tool and Cutter Grinder - www.lathes.co.uk/deckel/page3....
✦ Dore Westbury Milling Machine - www.lathes.co.uk/dore-westbury/
✦ Emco Unimat SL Lathe - www.lathes.co.uk/unimat/
✦ IME Watchmakers Lathe - www.lathes.co.uk/ime/
✦ Kennedy Hexacut - www.lathes.co.uk/taylor/page2....
✦ Myford ML7 - Tri Leva Lathe - www.lathes.co.uk/myfordtrileva/
~~~~~~~~~~~~~~~~~~~
𝗦𝗔𝗬 𝗛𝗘𝗟𝗟𝗢.
✦ Instagram - / theknacklersworkshop
✦ Patreon - www.patreon.com/user?u=378142...
✦ KZfaq - / theknacklersworkshop
✦ My other channel - / channel
~~~~~~~~~~~~~~~~~~~
𝐇𝐀𝐒𝐇𝐓𝐀𝐆𝐒.
#IMEWatchmakersLathe #WatchmakersLathe #Watchmaker #Engineering #TheKnacklersWorkshop
WOW! Still reading this, then write “2021 is going to be a good year” in the comments!
PLEASE DON’T FORGET TO SUBSCRIBE ➤➤➤
kzfaq.info...
~~~~~~~~~~~~~~~~~~~
DISCLAIMER: Links in this video description might be affiliate links. If you purchase a product or service using one of these links, I may receive a small commission at no additional cost to you. The revenue I earn from affiliate links helps to keep my channel running and is an easy way to show your support and help me make more free videos like this. Thank you for the support!

Пікірлер: 42

@EverettsWorkshop 3 жыл бұрын

Those are very fascinating little collets, especially after seeing people using big ER-series stuff. I've only recently gotten into trying Evapo-Rust, and want to compare a bit to a product we have here called CLR, which is more geared to household cleaning. Need to experiment a bit as I have some old tools that have some rust that I don't want to wire wheel off. Thanks for sharing!

@TheKnacklersWorkshop 3 жыл бұрын

Hello Everett, I do think a lot of people rush straight for the Evaporust or wire wheel and it is not always needed... I hope your experimenting goes well. Take care. Paul,,

@TheMiniMachineShop 3 жыл бұрын

Interesting to hear of the lock down!

@TheKnacklersWorkshop 3 жыл бұрын

Here in the UK they have to change the law to make the lockdown happen... It is valid from now until the 31-March-21. Clearly we don't have the same population of the US but over 1,000 people dies of COVID yesterday... all very sad. Take care Paul,,

@AWDJRforYouTube 3 жыл бұрын

About a year ago I clean several 3AT small collets [very rusty ] that I got on ebay...in a harbor freight vibratory shaker, using plastic media and a few drops of dish soap came out clean

@TheKnacklersWorkshop 3 жыл бұрын

Hi Al, Thanks for visiting... That is good to hear that your collets cleaned up well. That's the beauty of KZfaq you can find lots of ways to do things. Take care Paul,,

@Smallathe 3 жыл бұрын

Good one! Yes, after derusting hurry and put some oil on them or they will flash rust...wipe and use...

@TheKnacklersWorkshop 3 жыл бұрын

Hi Saar, Thanks for watching... I plan to order some oil tomorrow and the job will be complete. Take care Paul,,

@Smallathe 3 жыл бұрын

@@TheKnacklersWorkshop Hi Paul, flash rusting is fast... As the name implies. I suggest you use wd40 or even Canola oil for now just to avoid flash rusting... Later you can wipe it off and apply some machine grade oil.

@GardenTractorBoy 3 жыл бұрын

We love our ultrasonic cleaner which we mainly use for carb parts. Great job cleaning these up and thanks for highlighting the detail. Take care

@TheKnacklersWorkshop 3 жыл бұрын

Hello Joseph, My ultrasonic cleaners is very small, at sometime in the future once I have the workshop finished I will get a bigger one. As with all my videos I hope there may be something that could be of help to someone. Thanks for watching. Paul,,

@CraigsWorkshop 3 жыл бұрын

Nice one Paul. Those collets have a new lease of life now and once you get a dial indicator on them in the lathe, it'll be easy to weed out any inaccurate ones. Light oil would be a good thing for the collets, at least until a better idea comes along :) I just made a rack for my 5C collets for the tool grinder. Cheers, Craig

@TheKnacklersWorkshop 3 жыл бұрын

Hello Craig, They are a very mixed bag of collets... More bad than good I suspect but as you said once I've clocked then the true story will be revealed. I look forward to seeing your collet rack, hopefully you filmed it... Thanks for visiting. Take care. Paul,,

@CraigsWorkshop 3 жыл бұрын

@@TheKnacklersWorkshop I didn't film the collet rack no - it was a very basic build, just some stepped holes in a thick board. I will try to remember and show it in the next odds and ends video.

@mattthescrapwhisperer 3 жыл бұрын

They turned out nice Paul.

@TheKnacklersWorkshop 3 жыл бұрын

Hello Matt, They are much better than when they started. I am sure there is a better way to do this so will continue to experiment as and when I find more collets. Take care Paul,,

@richpost4305 3 жыл бұрын

Hi Paul, glad to see you back for 2021! I've always had good luck protecting drill bits, end mills, and tap & die sets with a light wipe of WD-40, as others have noted. Silicone spray offers some light protection and does not attract chips, but dissipates quickly. Keeping everything stored in a toolbox drawer with desiccant packs works for me too in a very humid climate. Someday I hope to have a nice set of small collets for the Unimat, after I get the CNC conversion done ...

@TheKnacklersWorkshop 3 жыл бұрын

Hello Rich, I was tempted to use WD-40 but thought I would ask all the viewer for there thoughts. As the collets are in my home at the moment the temperature is quite stable. I plan to have most of my tools in boxes I will use desiccant packs in each... Take care Paul,,

@malcolmtill 3 жыл бұрын

I believe there used to be an ultrasonic cleaning solution that left some sort of lubrication on the cleaned parts. Maybe try Cousins website here in the UK.

@TheKnacklersWorkshop 3 жыл бұрын

Thanks Malcolm, I'll have a look on Cousins website and see what I can find... Take care Paul,,

@jonsworkshop 3 жыл бұрын

Hi Paul, looks like you have as much luck with that evaporust as I do, I think it only works if you live in the states for some bizarre reason (must be our crappy climate)! I would dip them in WD40 and poly bag them individually, then back in the rack, they will last forever like this. Cheers, Jon

@TheKnacklersWorkshop 3 жыл бұрын

Hello Jon, I don't think I will buy any more Evaporust... I will oil the collets shortly, fortunately they are in my home and the temp is stable and no rust has occurred. Take care Paul,,

@paultrimble9390 3 жыл бұрын

Hello Paul, it’s Paul ur W.V. Buddy. Yes I’m safe and well thank for asking in ur video. Hope ur safe and well. It’s been a minute since I’ve talked to ya. Been busy with thanksgiving, hunting, Christmas. But I’m wondering if you ever seen a Jacobs chuck model 4165. I think it’s a collet chuck( found it in some old stuff my grandpa had and he’s been gone since 91). Looks like drill chuck but no hole or teeth for chuck key. It threads together and has 3 jaw drill type jaws in it. And the good thing is it fits my dB 200. M-12 threads on back. It kinda look like ur e collet chuck a little smaller and has 3 jaw things in it instead of collet. Like it’s a variable fit type deal if that make any sense. Thanks. Stay safe ur W.V. Buddy

@TheKnacklersWorkshop 3 жыл бұрын

Hello Paul, Pleased to hear you are well... I am not familiar with the model 4165 Jacobs chuck, It is interesting that it fits on the Unimat SL lathe. Hopefully another viewer might read the comment and be able to help... Take care Paul,,

@MaturePatriot 3 жыл бұрын

It usually takes about two hours when I use Evaporust. Never run Evaporust in an ultrasonic bath with heat, as it will turn your metal jet black all over., or so I have heard. Like the others have said, WD 40 and sealed bags would be great. Keep Knackling!

@TheKnacklersWorkshop 3 жыл бұрын

Hi Vernon, That is interesting about evaporust and heat, I did not know that... Thanks for watching. Paul,,

@danielabbey7726 3 жыл бұрын

Thanks for the tip, Vernon. Did not know that about Evaporust!

@MissouriOldTimer 3 жыл бұрын

they look pretty good, I don't know if you would put little light oil in the holes in the block to just keep them from picking up moisture and rusting.. I really don't know though.

@TheKnacklersWorkshop 3 жыл бұрын

Hi Vernon, Good to hear from you... I agree it needs something, just not sure what yet. I am sure one of the viewers will have the answer, that is one of the many good things about KZfaq. Take care Paul,,

@treetopspider 3 жыл бұрын

Hi Paul, Good idea cleaning the collets, I ought to clean mine too as I'm sure it would be good practice every so often. Ive been trying to do a little work with my watchmakers attachment on the unimat lately. Ive come across a problem which I half expected I'd encounter as this is not a dedicated watchmakers lathe. I was tring to repivot a clock wheel as the end had snapped off. To my dismay, the drill bit would not align with the existing pivot on the end of my wheel where I wanted to drill into. It was very slightly off which caused the very tiny drill bit to snap. Do you know if there is any form of aligning that can be made on these unimats in order to get a true dead center. They say the mark of a good watchmakers lathe is being able to hold a razor blade between 2 sharp points. Thats certainly not the case with my lathe Great video, Keep them coming Johnny

@TheKnacklersWorkshop 3 жыл бұрын

Hi Johnny, It is a little tricky to get alignment... sorry my project is so slow moving that I have not get there yet... You need to adjust the headstock to try and align it. there is a chap called Saar who has a channel called Smallathe and he recently did a video on alignment, which might help... Take care. Paul,,

@MrFactotum 3 жыл бұрын

hi paul nice one, i'd try a smear of watch / clockmakers oil, it doesn't congeal like mineral oil, i believe its whale oil regards mr f

@TheKnacklersWorkshop 3 жыл бұрын

Hello Mr. F, I will order some oil tomorrow... I hope you are coping with lockdown No 3, It is going to be a long one... Take care Paul,,

@MrFactotum 3 жыл бұрын

yes coping, ive always plenty to do, never bored, so lucky in that respect. glad to see your ok after isiolation period, stay safe regards mr f @@TheKnacklersWorkshop

@Rustinox 3 жыл бұрын

I think i would put a bit of WD40 on them. The day you need one, just clean it up with brake clean or paint thinner.

@TheKnacklersWorkshop 3 жыл бұрын

Hi Michel, That does make a lot of sense... Thanks for watching. Paul,,

@danielabbey7726 3 жыл бұрын

Not a watchmaker, but I would probably apply a non-gumming light oil to keep them from rusting. This is great info, since I have many old 3PN, 4PN, and 5PN P&W collets to clean. Am planning on trying Evaporust in a sealed container, floating in the midst of a water bath in my ultrasonic cleaner.

@TheKnacklersWorkshop 3 жыл бұрын

Hi Daniel, I am pleased to hear that the video was of help to you... Good luck with cleaning up your collets. Take care Paul,,

@craigtate5930 3 жыл бұрын

With regards to the ones you feel might be too damaged to use. Are they viable to be repourposed/resized? I scrounged up a set of ZZ collets some time back that are extremely rusty, I have toyed with the idea of resizing them and making a custom collet chuck (maybe some day in the distant future )

@TheKnacklersWorkshop 3 жыл бұрын

Hi Craig, The issue that I have with some of the collets is mainly external damage, the keyway slot and the contact surface with the collet holder... As they are so small I will hang onto them just in case I think of a cool use for them. Take care Paul,,

@pgs8597 3 жыл бұрын

G’day Paul. Looks like you have a good selection of collets, did you get all the sizes you need? Looks like the auto focus decided not to cooperate with you, maybe don’t shoot over a sink with tools similar colour as sink (note to self) I bought a die last year and it also had a lead in on both sides I don’t know why. Cheers Peter

@TheKnacklersWorkshop 3 жыл бұрын

Hello Peter, Not sure about the sizes on the collets... I think I have some sensible sizes to learn how to use them. Thanks for the tip on focusing, hopefully I won't make that mistake again. The die was a bit annoying, was not that cheap so I expected more. Take care Paul,,