No video
Clearing my 295s | No more rubbing | Mounting new wheels and tires |
Рет қаралды 23,433
Күн бұрын#Morecutting #yokohamatire #Tacomarubissues
Todays video is super exciting! We finally did the cutting that was necessary to clear the 295/70/17 and honestly it was pretty easy until my dad melted the diamond wheel lol.
I hope you guys love the look of the truck as much as I do, ugh I just looks sooooooo good! I am very happy with how it turned out and although we aren't done with the modifications to stop ALL the rubbing right now its good to daily :).
Remember to hit that LIKE button, SUBSCRIBE and COMMENT if you like the new look of the tacoma!
Here are some links for the mods I run :
www.yotafamily...
Use code: NUNEZM03 for 15% off mods and gear!
MODS:
JKCOVER Center Console Accessory... www.amazon.com...
ECOTRIC Running Board Side Steps... www.amazon.com...
Auto safety Tailgate Insert Letters for Toyota Tacoma 2016 2017 2018 2019 2020 3D Raised Zinc Alloy Rear Emblem Decals with 3M Adhesive-Matte Black www.amazon.com...
Fyre Flys 9 Piece White LED... www.amazon.com...
tacomabeast.co...
www.runnin4tac...
tacomabeast.co...
www.carvenexha...
tacomabeast.co...
www.autoventsh...
caliraisedled....
www.tacomalife...
www.tacomalife...
www.tacomalife...
www.discountti...
summit-offroad...
Business inquires :)
moni0392@gmail.com
@americansoldier7776 2 жыл бұрын
Setup looks great!! Very impressed with the rims and tires combo! One of the best I’ve seen! Trust me, I’ve seen a lot. I have 2019 TRD Pro Team Voodoo! Lol
@BSTYTCO3 2 жыл бұрын
Thank you! Means a lot. Thanks for watching 🤙🏼
@OfficialAing 2 жыл бұрын
SHEEESH 295s! That is crazy love the how the truck is coming out, keep up the great work!
@BSTYTCO3 2 жыл бұрын
Thank you! 🤙🏼
@Mumfy64 2 жыл бұрын
Truck is coming together nicely. Keep going. Look forward to what you have planned in the future.
@BSTYTCO3 2 жыл бұрын
What?!? Mumfy just saw and commented on my video?!? 😧 ahh this is awesome lol and thank you! I watch all your vids 😁
@scubbarookie 8 ай бұрын
Nice! For 35's and lifts: I recommend Dobinsons MMR's with resi's all around and a 2" body lift from a company out in New Zealand! This is a buy once cry once type of investment! Seriously! Take care!
@keepitchillpeople1947 2 жыл бұрын
You could also tell the alignment shop to move your caster forward.
@Taco__Ray 2 жыл бұрын
Try to see if you can get the caster pushed forward you’ll get some good extra space with rubbing
@BSTYTCO3 2 жыл бұрын
Definitely will look into this, thanks for advice! Roof rack ? Hmmm 😉
@LegendsBeware 2 жыл бұрын
Looks badass 👍🏼
@BSTYTCO3 2 жыл бұрын
Thank you! 🤙🏼
@rbyee7571 2 жыл бұрын
Bruh, you're a bad boy
@jp9538 2 жыл бұрын
Mule in issaquah Washington did my body mount chop and was only $300 and they also cleared out pitch wel
@paulthompson661 6 ай бұрын
I’m in Moses Lake
@JuanManuel-fm9jt 2 жыл бұрын
KDMAX TUNE IT GIRL!!!
@BSTYTCO3 2 жыл бұрын
I’m the works 🤙🏼😈
@richardclause2852 2 жыл бұрын
looks awesome monica 😊
@BSTYTCO3 2 жыл бұрын
Thank you!
@dkshdw2004 2 жыл бұрын
I've only seen a couple of videos and I am intrigued. I want to see what the future of your taco entails.
@ChasingTheAdventureOutdoors 2 жыл бұрын
Sweet looking truck!! 2 questions: what headlights are those? And what part of Washington you in?? Subbed!
@BSTYTCO3 2 жыл бұрын
They are the 16-21 projector style headlights with sequential turn signals. I got them off of Tacomabeast. Im towards the southeastern part of the state close to the Oregon border.
@americansoldier7776 2 жыл бұрын
It’s not in your mind, it really does look great! 😂
@Spanky5.7 Жыл бұрын
So many people in Oregon or Washington that will do the BMC and pinch weld cut
@BSTYTCO3 Жыл бұрын
Yes! I was finally able to find a professional shop to do the bmc.
@playeroreo0755 2 жыл бұрын
What brand lugs nuts do you have?
@BSTYTCO3 2 жыл бұрын
They’re summit off road lug nuts
@PhoHmooAmerica 2 жыл бұрын
Nice looking taco. I could of went with a taco instead of my canyon
@danieldee2287 5 ай бұрын
How much power loss? Do you think it’s worth going 295?
@BSTYTCO3 5 ай бұрын
Don’t know exact numbers but I did lose a little bit of power, but I ended up getting a pedal commander that helped, and then eventually tuned my Tacoma.
@nunmar100 2 жыл бұрын
Nice ride cousin.
@BSTYTCO3 2 жыл бұрын
Haha 🤙🏼
@Threedaysextension 2 жыл бұрын
One thing you got it wrong when you went for bigger tires before the suspension. Suspension should the very first upgrade when you are putting that big of a tire to get more clearance. Would've saved you all the unnecessary cutting. All you need is a Pinch weld & BMC (Body mount chop). Good job anyways!
@Threedaysextension 2 жыл бұрын
Also grinder from harbor freight is only $10.
@BSTYTCO3 2 жыл бұрын
I know now lol good learning process for sure. Definitely going to look into that grinder. Thank you! 🤙🏼
@Threedaysextension 2 жыл бұрын
I highly suggest going for Dobinsons. They are established & highly respected by offroaders worldwide. Also check SPC adjustable upper control arms so you can maximize your caster. What is your wheel specs? I think you very aggressive offset
@BSTYTCO3 2 жыл бұрын
@@Threedaysextension my wheel specs are 17x9 -25 offset. Yeah I’ve done a little research on dobinson, one of the KZfaqrs I follow actually installed that kit on his Tacoma.
@keepitchillpeople1947 2 жыл бұрын
KD Max tune would be awesome vid.
@BSTYTCO3 2 жыл бұрын
Yes I agree! Will definitely look into it.
@vr6trooper Жыл бұрын
Are those tires on stock suspension as of the time of the video? I know you mentioned you wanted a new set up in the video but not sure what you’re running on the truck in the video. Truck looks dope!
@BSTYTCO3 Жыл бұрын
No the truck has about a 2.5 inch lift at the time of the video.
@vr6trooper Жыл бұрын
@@BSTYTCO3 thank you! Love the truck
@osamaabdelgader8348 3 ай бұрын
Is this -38 offset ?
@BSTYTCO3 3 ай бұрын
-25
@Taco__Ray 2 жыл бұрын
Gotta get a roof rack!
@avalos2k7 11 ай бұрын
Do you have spacers in the rear in this video or is that just the -25 offset? Also what width is the tires, 12.5?
@BSTYTCO3 11 ай бұрын
Yes there is spacers in the rear along with the -25 offset. My tires are 295/70/17
@edgarlares9118 2 жыл бұрын
That poor mustang in the garage though 😢
@barrettaronson9103 Жыл бұрын
What offset do you have
@BSTYTCO3 Жыл бұрын
-25
@ErickGarcia-gn6ge Жыл бұрын
Whats the offset on those rims ? That suspension they installed at the dealer .. did it have a lift or its just upgraded to better struts with no lift .. reason Im asking is cuz imma install a 3” suspension on mine and those 295’s look sick with them yoko geos .. truck is coming together just dope
@BSTYTCO3 Жыл бұрын
Thank you! It’s a lift but currently at a 2.5 inch lift. The offset is -25. I do plan on upgrading the suspension really soon and I’ll be sitting at a 3 inch lift.
@bennyjett357 2 жыл бұрын
Is that a fast back in the garage if yes do they sell it
@ht1261 2 жыл бұрын
Please show wheel and tires when you’re talking about them.
@JamesReedy 10 ай бұрын
Sliders make terrible steps because even flat sliders are too high up and you have to fold yourself in half as you get in otherwise you end up too high up. That’s part of why the nerf bars are dropped like that… Unless you’re a bridge gnome sliders won’t work well.
@BSTYTCO3 8 ай бұрын
Definitely a bridge gnome 😂
@JamesReedy 8 ай бұрын
@@BSTYTCO3 haha
@franciscoprado958 2 жыл бұрын
Did you use wheel spacers to get that offset or just the wheels themselves??
@BSTYTCO3 2 жыл бұрын
Wheels themselves are -25 offset plus I have a 1.25 spacer
@billocampo1365 2 жыл бұрын
Do you have wheel spacers on , just wondering because of the poke and what size wheels and offset do you have..
@BSTYTCO3 2 жыл бұрын
Yes I do it’s a 1 inch spacer. My wheels are 17x9 -25 offset
@billocampo1365 2 жыл бұрын
@@BSTYTCO3 I'll be upgrading from 17x8.5-0 to a 17x9-12 soon,
@Steezy.gunz_ 2 жыл бұрын
Rock sliders
@shanemartinson5006 2 жыл бұрын
Quit 1/2 stepping and just put a 6 inch lift on it, then start chopping your fender wells up. It less cutting that way, and in the end you save money... if you're not a hardcore rock crawler put a rough country 6 inch on it and be happy 35's fit that pretty damn good
@alexalvarez9462 2 жыл бұрын
Did you have to upgrade your UCAs for the 6 inch lift?
@shanemartinson5006 2 жыл бұрын
@@alexalvarez9462 it definitely recommended on almost every board, but I couldn't tell ya, I'll be adding another 2 inches on my lift after the holidays guess I'll find out. I do know with 4" & more it help the alignment a good bit and helps give the caster you need for a good ride... but I have the 4" right now and my uca's are stock
@alexalvarez9462 2 жыл бұрын
@@shanemartinson5006 thx man been looking at those RCs
@danlm6490 2 жыл бұрын
Did you have a leveling kit to fit your 295/70/17 your taco looks good
@BSTYTCO3 2 жыл бұрын
I do not have a leveling kit. I’m running eibach struts in the front at a 2.5 lift and toytec in the rear. Thank you!
@alejandroserrano2181 Жыл бұрын
Do U have Spacers or just different offsets rims for the poke ?
@BSTYTCO3 Жыл бұрын
I have spacers, and my wheels are -25 offset
@alejandroserrano2181 Жыл бұрын
@@BSTYTCO3 🤔-25. That really helps. I got a 3.5 inch lift. So I wanna see what will rub and what won’t. Thanks !
@BSTYTCO3 Жыл бұрын
Anything bigger than a 285 without spacers you’ll most likely rub on the cab mount and pinch weld.
@alejandroserrano2181 Жыл бұрын
@@BSTYTCO3 ahh gotcha gotcha ! Appreciate it!!
@billocampo1365 2 жыл бұрын
I just saw your video. just wondering. is your truck lifted?
@BSTYTCO3 2 жыл бұрын
Yes it’s a 2.5 lift
@Only.acty808 2 жыл бұрын
what's the specs on the rims you have on?
@BSTYTCO3 2 жыл бұрын
17x9 -25 offset
@GOPROEDITS-df2bv 2 жыл бұрын
What inch lift do you have?
@BSTYTCO3 2 жыл бұрын
It’s currently at 2 maybe 2 1/4. The aftermarket suspension was added by the Toyota dealership and that’s as much as they would lift it. Haven’t had a chance to see if I could get more lift from it.
@jorgesalinas7070 2 жыл бұрын
Is that Stock suspension ? If it is that’s amazing that it has that much rub. I think I’m stepping up to the same size tire as well.
@BSTYTCO3 2 жыл бұрын
Not stock suspension, I have eibach struts in the front and toytec shocks in the rear. This is the “upgraded” suspension the dealership installed.
@111Ronaldinho 2 жыл бұрын
@@BSTYTCO3 Is there a link for those parts? I am looking to lift mine.
@BSTYTCO3 2 жыл бұрын
@@111Ronaldinho tacomabeast.com/products/toyota-tacoma-eibach-pro-truck-suspension-lift-system these are the struts I have. I’d actually do this kit honestly so you have eibach all the way around. And you could get up to 3 inches of lift and it’s affordable 🤙🏼
@ikharl328 2 жыл бұрын
How much offset?
@BSTYTCO3 2 жыл бұрын
-25
@adobebackyards4000 Жыл бұрын
Save your money
@davidestrada8944 8 ай бұрын
Are you from Walla?
@BSTYTCO3 8 ай бұрын
😁👍🏼
@davidestrada8944 8 ай бұрын
@@BSTYTCO3 I used to live in Milton I stay in Pasco now. Lmk when you go to the mountains need more ppl to join.
@BSTYTCO3 8 ай бұрын
@@davidestrada8944 okay bet! Follow me on IG so we can plan something. Someone else from tri just hit me up too.
@justinlaurea7124 26 күн бұрын
Bed rack 🤷♂️
@Windyknuckles 2 жыл бұрын
What's the offset on those wheels!?
@BSTYTCO3 2 жыл бұрын
They are 17x9 -25 offset 🔥🔥🔥
@billocampo1365 2 жыл бұрын
If you didn't already install 35's check out "The Wonder Taco" on KZfaq, ( Oct. 2021) if you're planning on installing 35"s, i
@BSTYTCO3 2 жыл бұрын
Thank you I will do that! 😁
@markbello1199 2 жыл бұрын
What’s your IG? I didn’t see it, diggin the build
@BSTYTCO3 2 жыл бұрын
Nunezm03
@andyhandy9996 2 жыл бұрын
Bust that mustang out!! My god,sell it or get it restored,poor classic car!
@BSTYTCO3 2 жыл бұрын
Lol not yet. And yea I know it looks bad having it covered like that but it’s been in our family for years and it needs work before she runs again.
@jerzygutowski3170 2 жыл бұрын
Is this is girl or guy
@BSTYTCO3 2 жыл бұрын
This Girl
Classys Garage
Рет қаралды 34 М.
Bros FOURR Speed
Рет қаралды 20 М.
Nick Mango
Рет қаралды 345 М.