CLOCK restoration - Antique alarm clock made in China

Рет қаралды 22,867

結構老毛 Morgan

3 жыл бұрын

Пікірлер: 24

@user-xw4pr9vc2p 3 жыл бұрын

希望先普及一下机修的初级技术，然后介绍一下，修复工艺，找些简单的活让大家练习一下，在介绍一下一些工具，好用的工具很重要

@LocutusDeer 2 жыл бұрын

More a early 1950s Junghans alarm clock from germany

@LocutusDeer 2 жыл бұрын

Also the clock is still pretty dirty

@felipedeoliveiragomesolive7247 2 жыл бұрын

Excellent job 😀😁😉😊😙😚🇧🇷🐶

@morganlao 2 жыл бұрын

Thanks your like

@osenhoreomeupastor6047 2 жыл бұрын

@@morganlao x

@melvinaraya7579 11 ай бұрын

Quedo hermoso

@classydays43 2 ай бұрын

Did you really use sand to clean clock parts? Sand?? Please never do that again. That balance wheel swings unevenly and has no power to it. Please clean the pivot holes and springs properly next time or it will not last. You can clean out the pivots with a toothpick and the pivots with polishing compound.

@marcos79476 3 жыл бұрын

Con la esfera vieja se hubiera visto vintage.

@morganlao 3 жыл бұрын

Gracias

@puthakhunpraiwal 2 жыл бұрын

i think it not works perfectly .. just needs to little bent a hairspring.

@Toms.George 2 жыл бұрын

👍👍👍👍👍👍

@vintagesimplexfirealarmsof6440 3 жыл бұрын

I have one of these it was my grampa's clock

@morganlao 3 жыл бұрын

That's cool

@zenobiakhan5665 Жыл бұрын

Hey, I have a clock like this got it from thrift store. But it not working the bell works fine but clock won't move..can you help me?

@morganlao Жыл бұрын

where r u my friend?

@zenobiakhan5665 Жыл бұрын

@@morganlao Pakistan

@classydays43 2 ай бұрын

Do both keys wind? If so, there's dirt in the gears or the balance wheel isn't moving for some reason. If not, then one of the winding springs is broken and you'll need a new one. You can buy them if you measure thickness, width and length and source one from a clockmaker supplier.

@bishalshrestha1114 2 жыл бұрын

I have one of those watch but how to repair don't know ...

@classydays43 2 ай бұрын

Take it apart, clean it, put it back together then oil with sewing machine oil. You will only need a tiny bit on the axles that meet up to the plates. Just make sure you pay attention to what you are doing and really look at it before you start, though.