Clone 4D - Router Duplicator / Copy Carver - Propeller Duplicating.
Рет қаралды 1,343,497
11 жыл бұрынDownload Free Propeller Duplicating Guide @ goo.gl/EbnuLe
Clone 4D Plans @ cloneduplicators.uk/clone-4d-...
Clone 4D Duplicator Kits @ goo.gl/9kGMQf
Cutters used in the video @ goo.gl/Bd5YMd
This video demonstrates the Clone 4D Duplicator carving a paramotor propeller by copying just one half of a damaged prop.
The hub of the master and blank are bolted to the work top at exactly the same centres as the router cutter and stylus tip.
0:07 - 0:13 The prop master and blank are screwed down at both ends, and the hub bolts are removed so the hub can be machined.
0:15 - 0:40 The hub is machined.
0:40 - 0:52 Both hubs bolts are re fitted.
0:52 - 3:30 The top of the first blade is carved.
3:36 - 4:14 The blank is removed and rotated 180 degrees. The centre line drawn on the blank is lined up with the centre line on the work top and the blank is fixed in place.
4:15 - 5:45 The second blade is carved.
5:55 - 6:21 The blank and master are turned over, lined up with the reference lines on the work top, and firmly fixed in place.
6:22 - 7:33 The back face of the second blade is carved.
7:34 - 7:49 The blank is rotated 180 degrees.
7:50 - 9:05 The back face of the first blade is carved. At 8:21 the main router assembly rail lock is applied with every pass, ensuring that all areas have been cut.
9:06 Carving is complete.
@mrfrontranger7911 9 жыл бұрын
great machine ,Id want a bike brake on there to aid in carriage control ,but best unit ive seen good job.
@kmonnier 10 жыл бұрын
Props on a great video!
@disklamer 3 жыл бұрын
That’s a great device, I like the "classic" mechanical design, it seems to offer a great range of motion.
@royalmaster203 3 жыл бұрын
very fancy pantograph, nice
@navid9852 3 жыл бұрын
Great video
@therambler3833 4 жыл бұрын
This is a great video thanks for sharing it i've been looking into this duplicator for a few years and i keep coming back. Name of music who is it like the tune makes it more fun
@netninja8123 8 жыл бұрын
Nice! thanks for the video. Please wear a respirator.
@ParsMermer 4 жыл бұрын
Perfect👍
@Armilite1 4 жыл бұрын
What is the max length prop you can make?
@lutfourrahama2983 9 жыл бұрын
nice
@lasotot 9 жыл бұрын
cual es el precio de una de estas maquinas
@user-dv3yh3fl6e 8 жыл бұрын
Кто знает, сколько стоит такой станок и как приобрести?
@THOMASTHESAILOR 5 жыл бұрын
That's a beautiful Machine.. Smooth action. but, how is it 4D ? or is that a model number ?
@user-lh3lc3gy9d 8 жыл бұрын
вы купили или сделали этот станок
@tirsaangelicafollanaarana2459 3 жыл бұрын
Perfet
@LuthieriaDomestica 8 жыл бұрын
Qual o valor de uma máquina desta?
@jackdawinnovation 11 жыл бұрын
Prices are on the web site. Please follow the link above.
@licustoms 9 жыл бұрын
I am interested in your design... but I have to ask - what's the difference between the Clone 4D and the Clone 3D?
@jackdawinnovation 6 жыл бұрын
The 4D has a true vertical plunge action so can be used for other woodworking tasks. It is also counterbalanced using springs rather than weights. This makes it incredibly stable to use. More 4D features can be found at cloneduplicators.uk/clone-4d-design-features/
@viagro1980 8 жыл бұрын
what kind of carver bit are you using here?
@hieuletrung2322 8 жыл бұрын
mua máy này ở đâu hả Ad?
@RS-ib1rq 3 жыл бұрын
How much does it cost please
@user-xf2jx8ce6o 3 жыл бұрын
how much doest it cost
@FixitAll 4 жыл бұрын
Nice machine, but, this is 2D since you move the head/bit in 2 direction only.
@user-xf2jx8ce6o 3 жыл бұрын
where can i buy it
@jackdawinnovation 11 жыл бұрын
I build and sell the duplicator machines not the props.
@lazarominoz.5613 8 жыл бұрын
where can i buy it and how much is it?
@jackdawinnovation 6 жыл бұрын
cloneduplicators.uk/clone-4d-ordering/
@c.e.g7448 3 жыл бұрын
The prop you made is for demonstration purposes I presume. There are knots in the wood and that is a real no no for propellers!
@jackdawinnovation 3 жыл бұрын
Absolutely!
@fromatron 3 жыл бұрын
lol nice, uh, thing you got there. lol.
@madeariartha2546 5 жыл бұрын
How the duplicator is made
@CarlosMolina-fl7ci 11 жыл бұрын
How much does this machine cost?
@jackdawinnovation 6 жыл бұрын
cloneduplicators.uk/clone-4d-ordering/
@florenciobaltazar8018 9 жыл бұрын
você tem essa maquina pra vende
@Michel-lj9qb 5 жыл бұрын
a pine propeller ?
@jackdawinnovation 5 жыл бұрын
Hi, thank you for your comment. The purpose of the video is to demonstrate the capabilities of the Clone 4D, it's not meant to be a how-to video.
@MrDondoerner 9 жыл бұрын
How much are the plans? Give me a link
@jackdawinnovation 6 жыл бұрын
cloneduplicators.uk/clone-4d-kits/
@daytonm6809 5 жыл бұрын
Wouldnt it be easier to just buy a new prop? That's not laminated or balanced...and if you wanted to make more than one you mine as well get a cnc...
@jackdawinnovation 5 жыл бұрын
Hi, thank you for your comment. The purpose of the video is to demonstrate the capabilities of the Clone 4D, it's not meant to be a how-to video.
@martyntilley6272 8 жыл бұрын
Softwood prop? NO THANKS!! unless it was just to show the machines capabilities?
@jackdawinnovation 6 жыл бұрын
You're correct, an aircraft propeller should never be made from softwood. This one is only going to be used as a display piece.
@wernerhoerning5661 3 жыл бұрын
COMPLICADO
@flyinshu123 4 жыл бұрын
After all that trouble, why not carve out a real prop. surely the plan wasn't to use a non laminated piece of knotted pine for a propeller.
@jackdawinnovation 4 жыл бұрын
This is just a demo video showing what the 4D can duplicate. The prop was never meant to be actually be used!
@LogicSpeaks 9 жыл бұрын
Awesome but almost 6000 dollars? Why wouldn't you just buy a CNC machine? Is there something this can do that a CNC can't? (I guess you can't necessarily copy things as easily, but CNC will probably be more precise?) Anyway, not trying to troll, just seems a little high to comparable technologies. Pretty cool idea nonetheless.
@jackdawinnovation 6 жыл бұрын
Not everyone wants a CNC machine. With a CNC router very little, if any, woodworking skills are needed to produce the finished article; it’s more important that the operator be skilled in CAD and computer programming than it is to be a skilled woodworker. This process removes the skill of the craftsman from the creation process. Unfortunately, this seems to be an all too familiar scenario of our modern world and is why valuable skills are getting lost.
@al_aiyubi 4 жыл бұрын
nice
Cool Items Official
Рет қаралды 56 МЛН
Jackdaw Innovation
Рет қаралды 172 М.