Clutch Weights for your KTM / Husky | Less Stalling, Smoother Power, Better Traction

Рет қаралды 9,716

2 жыл бұрын

Adding clutch weights to your KTM / Husky bike is a no brainer. Experience reduced stalling, smoother power and better traction for very little money. Keep stalling out on steep hill climbs? Our clutch weights keeping your clutch rotating and your bike pulling! Bolt the BDSB clutch weight to your stock KTM, Husqvarna or Gas Gas clutch. It is worth every penny and easy to do. In stock for $49.95 at bestdualsportbikes.com/clutch-covers-clutch-weights

Пікірлер: 18

@johnfryman4428 2 жыл бұрын

Good stuff - smoothed out the low end on my KTM 500

@chartnagel 2 жыл бұрын

Great information, keep the videos coming.

@ktmhusky 2 жыл бұрын

You got it!

@crazybalony 2 жыл бұрын

Thank you for the videos, they're always quite perfect and right to the point, no bs. Quick questions, 1) will the bigger and fatter 13oz weight, you newly offer on your site, fit under the STOCK clutch cover with the new bolts you provide or will one need to grind material away to fit? 2) with a 13oz weight, which setting (1 , 2 , 3) do you recommend for the clutch? I'd definitely appreciate the lightest (1) setting, but I'm curious if the clutch will start slipping with the added weight. With 13oz, should one go for the strongest (3) setting to prevent slippage? Thanks again for your videos and products!

@TheDirtyBirchTrails 2 жыл бұрын

Great idea !

@ktmhusky 2 жыл бұрын

Thank you. It's a no brainer!

@christophernapolitano8404 2 жыл бұрын

On the 450XCF and the 11oz weight does the rub line always happen? Or is it inconsistent? Would love to give it a go but don’t really love the look of the billet cover. Not sure it makes sense to grind down the inside on the stock one or what method would you use to widdle it down. Any insight is appreciated.

@ktmhusky 2 жыл бұрын

Just use the new clutch cover and it's not an issue. You can use the 13 oz now as well, with the new cover www.bestdualsportbikes.com

@mikephillips3109 2 жыл бұрын

I just installed the 9 oz weight on my 22 exc-f 350. I removed the 3 steel plates that you mentioned but there is a circular piece and a rubber washer that they hold in place. I assumed they come out too since there’s nothing to hold them in. Did I do that right?

@ktmhusky Жыл бұрын

Yes you did. Just like the instructions show. Thanks Mike

@dwankers 2 жыл бұрын

Question ..i was listening to a vid billy bolt commenting on using a flywheel weight 196 grams. Do flywheels weights react the same as a clutch weight.

@ktmhusky 2 жыл бұрын

Exact same principle, yes.

@Dutters.dirtbikes 2 жыл бұрын

Iv heard you need to re map your bike with the weight. Was that true for you ? I’m on a 17 fx350

@ktmhusky 2 жыл бұрын

That would be like saying you need to re map for a different rear tire that is a bit heavier. Neither sitch is true. Can't be done though, on the style of clutch your bike has. Needs it though