CMYK Separations Risograph Tutorial

Рет қаралды 57,404

Күн бұрын

**Support the channel by buying merch or tipping: oliviaandpindot.com
Colour Charts can be ordered here: oliviaandpindot.com
***
Convert photos and other coloured images to grayscale separation layers for risograph printing!
Other Photoshop tutorial link: • Risograph Tutorial - P...
All About Riso: • ALL ABOUT RISO | olivi...
Also - I would really appreciate if you can please subscribe to my channel if you like my content (because KZfaq will only reward me if I hit 1,000 subscribers).
risograph tutorial
risograph printing
risograph
riso printing
riso printing tutorial

Пікірлер: 80

@swirlypop123 3 жыл бұрын

this is exactly what i've been looking for!! thank you!!

@alicjaboss 5 жыл бұрын

I've been looking for exactly this kind of tutorial! Glad I've finally found it and your channel :)

@kitetsustation 5 жыл бұрын

Oh Im really glad! This one is for making the artwork in Photoshop: kzfaq.info/get/bejne/i9h2pJh80c-0YGg.html Please let me know if there's other information you need - I am always taking suggestions!

@poisonedclouds6999 Жыл бұрын

thank you for sharing this, its so helpful when showing each steps with such patience

@ms-hy3io 5 жыл бұрын

Both of your tutorials have been really helpful. Thank you!!

@kitetsustation 5 жыл бұрын

Meredith Smallwood I'm so glad, thanks! Happy printing!!

@carmemgalvao1097 3 жыл бұрын

this tutorial is perfect! So well done, helped me a lot

@schiontek 6 жыл бұрын

Awesome tutorial! Thanks

@daisymaynashmusic Жыл бұрын

Ah this is the best tutorial I've seen for this, thank you!

@bonghig 3 жыл бұрын

This is an incredibly helpful tutorial. You did a great job walking through each of the steps. Thank you!

@kitetsustation 3 жыл бұрын

You’re welcome! I pretend like I am explaining it to myself. 🤣🤣

@nataliesilva4755 3 жыл бұрын

i love you so much, this tutorial is amazing, you are completely incredible i love you

@annanuss2041 Жыл бұрын

THIS WAS AWSOME THANK YOU

@emilykouri3653 3 жыл бұрын

This is great! Thanks so much.

@jeremyleung4389 4 жыл бұрын

Thank you for uploading this, super helpful

@kitetsustation 4 жыл бұрын

Thanks!!

@aschesinkkonen1495 2 жыл бұрын

thank you sm for this tutorial!!.I'm printing my first illustration book in Riso and to have tools and free education available has been so helpful.

@kitetsustation 2 жыл бұрын

Yay! Good luck with your book!!

@d.nicolaevsky Жыл бұрын

This is perfect, thank you!

@Blackwaters33 5 жыл бұрын

Amaaazing tutorial! :)

@kitetsustation 5 жыл бұрын

Blackwaters33 Ahaha thanks again!

@jikim2945 3 жыл бұрын

Thank you! this is a great tutorial.

@kitetsustation 3 жыл бұрын

Thank you!!

@toohappytobealive666 4 жыл бұрын

I haven't used this video yet but this is the exact kind of tutorial I have been trying to find for years, so thank you. You explain it very simple in little steps and that's easy for me to follow (I'm someone who knows zero about any digital program such as photoshop). Thank you so much. Up until now I have always worked by hand with the riso, meaning I would have to trace my image on a seperate paper in all the different colors I wanted which is a lot of work. But I'm exited to try this color separation in photoshop (I've tried to ask the people that worked with the riso machine at the place I print, but they don't understand what I mean, and say it can't be done to separate colors from one image.. pff!!)

@kitetsustation 4 жыл бұрын

Omg!!! Thank you! Please try also my color separations tutorial in Photoshop here: kzfaq.info/get/bejne/i9h2pJh80c-0YGg.html This shows how to start an illustration in Photoshop. The CMYK tutorial is if you already have a colour illustration but need to separate the colours. So you can try it both ways to see which results you like better. :-) I really appreciate this comment!!

@Not-tomorrow 2 жыл бұрын

Great tutorial, thank you! Done lot's of riso before, but excited to try out color separations. So awesome that you're based in Oakville!

@kitetsustation 2 жыл бұрын

Thanks for the kind note! I don’t really do print ‘jobs’ anymore tho!! Good luck!

@Not-tomorrow 2 жыл бұрын

@@kitetsustation Thanks! Actually doing an art residency with a riso, my first prints came out great!

@CanTamura 2 жыл бұрын

Thanks for this tutorial. I saw it a couple years ago, and looked for it again when I wanted to double-check how to convert a photo into a halftone file for Risograph. I will print only in black, but it is interesting how you do the color separations with different angles, shapes, etc. I'd like to try that sometime.

@kitetsustation 2 жыл бұрын

Thanks!! I am so glad this tutorial helped you in your work and hope it turned out how you wanted!!

@aurorechapon9346 2 жыл бұрын

Very very helpfull + the tip of making a simulation on screen is amazing ! I'm a graphic designer, and thanks to you I've just discovered a new way to make images… so THANKS A LOT

@kitetsustation 2 жыл бұрын

Awesome!! You’re welcome!!

@tirlio 4 жыл бұрын

Thank you! This helps a lot!

@kitetsustation 4 жыл бұрын

Thanks!!

@sanpls 2 жыл бұрын

Beautiful and very helpful

@pickyour 2 жыл бұрын

i love you. thank you!

@ironlette 4 жыл бұрын

very helpful!!! thanks a lot!!!

@kitetsustation 4 жыл бұрын

Ahh you're welcome! ☺️

@Oshyano 5 жыл бұрын

Great help, thanks!

@kitetsustation 5 жыл бұрын

Thank you!

@joshuabrown1300 2 жыл бұрын

Thank You!!!

@pacococo3763 4 жыл бұрын

This video was fucking amazing, very educational. Thanks!

@mintmageful 4 жыл бұрын

Thank you :)

@pierrotitube 3 жыл бұрын

BRAVO

@alexandriamaniak 4 жыл бұрын

Thank you!

@kitetsustation 4 жыл бұрын

You’re welcome!! 🥰

@davedave7904 3 жыл бұрын

do you have a step by step guide on how to setup a one color file using Illustrator (vector) for Riso by chance?

@christinakang203 2 жыл бұрын

Thanks for this tutorial! Are there any good tips on registering each layer? My risograph is only done through the scanner bed and I'm finding it hard to register things up tightly

@kitetsustation 2 жыл бұрын

Beyond making reg marks on the print and lining them up as best as you can with the arrow buttons, I’m not sure.

@kathleenriddell4209 4 жыл бұрын

Hi, I did this tutorial a while ago and it made a perfect riso preview. Now when I've come back to it I can't seem to make it work the same way and I have no idea what I'm doing wrong. The colours keep coming out really dull and muddy instead of true to the original image. Do you have any ideas what I could be doing wrong? Thanks!

@kitetsustation 4 жыл бұрын

Hi, not sure without seeing the actual file but if I had to guess, I am wondering if you are copying the channel layer correctly? You must ensure in the Layers panel that only the original image is visible before going back to the Channels panel to grab c, m, y, or k layers...

@auilix Жыл бұрын

Hello! I'm trying this tutorial to convert an somewhat detailed already made illustration that has colours and lineart in photoshop and just can't seem to get the colours right (coming up off and bland). I also don't have a Mac so I can't access Spectrolite and am a bit stuck! Do you have any advice on how you'd do this differently if it were an illustration rather than a photo?

@shannajackson767 5 жыл бұрын

this is awesome and very helpful as I am hoping to start experimenting with riso printing... one problem i am having though when creating the bitmaps is that when i get to the rasterize layer step ( at about 14:00 in the video, and yes i am particularly interested in doing these halftone style prints!) , the rasterize tab is greyed out/not clickable... I've looked and looked and cannot figure out what is preventing this step aghhh help pleeease!!

@kitetsustation 5 жыл бұрын

Hmm please try this video at 3:32: kzfaq.info/get/bejne/odWfgLNm3uCploE.html I did this more recently and i think i am more step-by-step here. Please let me know if it works for you...

@johnkough 4 жыл бұрын

@@kitetsustation I just tried this and I have this same exact problem. Followed all the steps, I think, and "rasterize" is greyed out for all layers. Weird. (Update: now I find that, though I cannot do the rasterize step, I can still multiply one layer at a time, and if I multiply a given layer, the layer under it is seen in combo with the layer over it, as intended. So if I multiply the top two layers I see the top three layers combined. And the top layer color seems to dominate and modify the color or colors under it. [which is how it's supposed to go?]. The only thing I wonder about though is that I can only see an image built from maximum three colors, though my file has 4 color layers. The bottom, 4th color layer will not be seen. But anyway I think I was kind of able to make this work, and it's very cool. But the thing that differs from what you do in the video is that, as said, I cannot rasterize, and also, if I select more than one layer at a time, the entire blend mode menu greys out, so I can't multiply. Can only multiply one layer at a time.

@kitetsustation 4 жыл бұрын

@@johnkough i am not sure how i would be able to troubleshoot this if i can't recreate the issue in order to fix it.... do you have any suggestions?

@johnkough 4 жыл бұрын

@@kitetsustation Thanks for the response. I was partly just putting this out there to compare notes/discoveries with the previous commenter or anyone else who had this issue, and also looping you in in case you had any thoughts. I get that you don't have enough info though. Not expecting a troubleshooting session. Maybe I'll message you to see if you want to check out the file, but I certainly don't expect that. Thanks for the video! As I say, I'm actually starting to get some exciting results (which would otherwise be way beyond me), but just had to do a couple of things differently at the end, for whatever reason.

@kitetsustation 4 жыл бұрын

@@johnkough please go ahead and email the information - it's worthwhile to resolve it as it appears to be a recurrent issue

@s.t.saanth7381 5 жыл бұрын

Thanx for your totorials. Realy usefull. I have a riso 2 colour machine. Its have blue, green, red and black drums. It is posible or not to get natural colour print

@kitetsustation 5 жыл бұрын

Hi, you're welcome! You would need to experiment to see what works for you to be honest!

@s.t.saanth7381 5 жыл бұрын

@@kitetsustation full colour printing is posible or imposible to use riso machine?

@kitetsustation 5 жыл бұрын

If you do multiple passes you can try to get it close but it won't look the same and the registration will more likely than not be off.

@s.t.saanth7381 5 жыл бұрын

@@kitetsustation thanx for your reply. Do you have any full colour samples pictures? I have red green blue black drums. How to use these drums and get full colour print? Pls help me. My whatsapp 0094752887751

@ranadeepjash1150 3 жыл бұрын

hi have you done full color experiments?

@techyeleru8850 3 жыл бұрын

Good morning , madam Is it possible CMYK on single drum machine if we print one color after one?

@ztephkkkk 3 ай бұрын

Hi! I followed the tutorial exactly but my end result looks like a brownish yellow mesh of colors where you can vaguely see the original image... any ideas why this might be happening? Thank you!

@johnkough 4 жыл бұрын

Good video. Suppose you wanted to create a deliberately misaligned print, so that the color layers or channels were not quite lined up with each other correctly. Any thoughts on a way to do that?

@kitetsustation 4 жыл бұрын

Thanks! You can always select the layer and use the selection tool to move or nudge it to desired location.

@johnkough 4 жыл бұрын

@@kitetsustation Thanks. Should have been obvious. I wasn't sure if it would work that way for some reason.

@kitetsustation 4 жыл бұрын

I got your email I've been a bit swamped but I will try to get to it soon!!! Sorry!!!

@johnkough 4 жыл бұрын

@@kitetsustation Thanks. I replied in another comment thread below. The mystery is mostly solved, I think.