CNC Laser Upgrade, mach3/Lightburnsettings for laser cut

No video

CNC Laser Upgrade, mach3/Lightburnsettings for laser cut

Рет қаралды 2,618

Күн бұрын

In this video I upgrade my Home built CNC to laser cutter/engraver with Neje E40. #neje #lasercutting #lasercuttingmachine #cnc #mach3 #lightburn

Пікірлер: 7

@diegomuitomaispakto 4 ай бұрын

good afternoon Do you have the connection diagram on the RNR Eco Motion board?

@GayanSachinthaMadusanka 3 ай бұрын

Yes I do

@ddddalibor 6 ай бұрын

nice video, hello, can you please show me how you connected the laser to the Mach3 USB Controller, how you connected everything needed from the electronics, I have a router with a Mach3 USB Controller and I want to add a laser

@GayanSachinthaMadusanka 6 ай бұрын

Hi, thanks for watching my video. Use separate 12v power supply. 1. Connect AVI to laser TTL pin 2. ACM and DCM pin to GND 3. 24V pin connect with 12v power supply VCC If you have more questions please don’t hesitate to ask. 😊

@ddddalibor 6 ай бұрын

Can link from aliexpress, what should I buy and everything that needs to be connected Thank you very much for your time

@user-hq3en8vk8i 11 ай бұрын

Hi GSM Tech, great video. I have the exact same setup. My RNR controller card is not showing not LB. Which controller settings did you use ? Once again top video

@GayanSachinthaMadusanka 11 ай бұрын

Hi, thanks for reaching. I use below board. Same happened when I tried first time. Running mach 3 application in admin mode solved issue. Please try and let me know store.zenix.lk/cnc-controllers/867-usb-100khz-4-axis-cnc-breakout-board-for-mach3-mach-3-red-color.html