This is an Outstanding Video on Machining with CNC Operations. Thanks for the Great Video! T J (Tom) Vanderloop, Author, Mechanical Designer, & Consultant: ATEA, AWS & SME-Life Memberships; Leader
@ProtolabsMFG3 жыл бұрын
Thanks Tom!
@shova2133 жыл бұрын
@@ProtolabsMFG what method and material would you recommend for re-creating a detachable motherboard tray on the Thermaltake core w200 www.tweaktown.com/image.php?image=static.tweaktown.com/content/7/6/7657_26_thermaltake-core-w200-super-tower-chassis-review_full.jpg.
@tkzsfen3 жыл бұрын
I wish all the videos in the world were just as straight to the point and not overly detailed, as this one. Also, nice graphs. They reduce misunderstanding costs...exponentially ;)
@ProtolabsMFG3 жыл бұрын
Thanks a lot!
@steamingspud2 жыл бұрын
“Specify tolerances only when necessary…” If it’s on the print it needs a tolerance…
@maxhax3672 жыл бұрын
If not cut 5% more or 0.2 mm. Whichever is smaller
@basilkurien56032 жыл бұрын
Informative bro. Keep it up
@schalkerasmus79524 жыл бұрын
Nice one Nico!
@tomtang26393 жыл бұрын
what do you mean by define on single datum? "cross section of 2 edges as a reference for all dimensional reference," what does that mean ? Can you elaborate on that and make some diagrams to aid this perhaps? thanks a lot.
@arildedvardbasmo4904 жыл бұрын
Thanks for that, it was a great video! You mentioned blank sizes - presumably you mean that if you design exactly 3mm smaller than standard blank sizes there is a minimal amount of material to remove. However, you don't mention what the standard blank sizes are. Do you have a rough outline for that? I'm sure there is variation.
@ProtolabsMFG4 жыл бұрын
Hey Arild, Thanks for the compliment and this page should help you find an answer to your question: www.3dhubs.com/knowledge-base/standard-blank-sizes-cnc-machining-sheets-rods/ Hope it helps!
@arildedvardbasmo4904 жыл бұрын
@@ProtolabsMFG Thank you!
@samgong13663 жыл бұрын
@@ProtolabsMFG Thanks for the video and link. The page says "Stock plates come pre-cut to size or as large sheet (typically, 2 m by 1 m - 6 ft. by 3 ft.) that are cut to blanks by the machine shop. So, the limiting dimension for a plate when it comes to design is its thickness." Does it mean I do not need to care about x and y dimensions since it will be cut to size by the machine shop anyway?
@ProtolabsMFG3 жыл бұрын
@@samgong1366 Hey Sam! There is always a size limitation on plates. It depends on the supplier.
@PerSjoborg2 жыл бұрын
Thanks for a great video, I have another blank related question. I presume it's not required to machine all surfaces of the blank, if the blank surface finish and tolerances are OK for the application. This of course depends on many things like the blanks surface finish and tolerance and the method used to divide it up. What can you say about the surfaces on blanks, their tolerances and how larger blanks are divided and what surface finishes and tolerances are possible in that step? Thanks for great content and your help.
@harrisons157610 ай бұрын
I really appreciate the content of the videos and the way you explain them, but the constant inflections and emphasis on words in the middle of sentences is excessive and hard to listen to for very long. Just a suggestion, not trying to be unnecessarily critical. Thanks for the videos.
@gsaghdsahdgsa4 жыл бұрын
Nice info :)
@tristanlongangue56713 жыл бұрын
Is 0,5 mm a normal drill bit
@ProtolabsMFG3 жыл бұрын
Hi, 0,5 mm is considered a normal drill bit.
@tristanlongangue56713 жыл бұрын
@@ProtolabsMFG thanks you but i if i have a fusion 360 design how do i share it to a machining company and do i need to put measures or the cnc program know all measures?except for the threads ?
@tristanlongangue56713 жыл бұрын
I dont know if you will see my last question because i just edited my reply
@ProtolabsMFG3 жыл бұрын
@@tristanlongangue5671 You should share the 3D files ideally in step or iges format with the required radii designed in the part. If the part has specific tolerances requirements or needs threads these specifications should be included in the technical drawing (PDF).