CNC Mill Conversion Part 4 - Setting up the Brushless DC Motor

Рет қаралды 4,197

4 жыл бұрын

Setting up a Brushless DC Motor (BLDC) on the ODrive position and speed controller.
Stepping through first-time install and setup of all elements to get the motor up and running.
Check out odriverobotics.com/ for more information
Or
discourse.odriverobotics.com/... for my project
Music: www.bensound.com
#WelcomeToMyGarage
#dev255

Пікірлер: 13

@simonlaker2139 2 жыл бұрын

Thank you so much for spending the time to show this. Have you a video on the gui as well. Thanks again

@Dev255 2 жыл бұрын

Hi, glad you enjoyed it, I don't have anything on the GUI although am currently creating editing a video on the use of the new Gameduino 3x Dazzler as a CNC display via HDMI, it works a treat. I do have other videos on the ODrive though. Hope that helps.

@simonlaker2139 2 жыл бұрын

@@Dev255 thanks I stumbled across one yesterday. Trying to navigate through ground loop at the moment. Also doing repairs on servo motors Now. Revolvers are very interesting

@johnstigglet7512 4 жыл бұрын

Hi Neil, great job and explained very well! Now one of the next steps is to get the other motors running and tuned at the same time, this has been a challenge for me and most of the newbies. again great work, stigglet :)

@Dev255 4 жыл бұрын

Thank you, I will make another video when I get both working and when the unit is on the machine. I will share both the ups and downs too. I feel there is going to be some interference when the drives are under full load with such a sensitive encoder (needs to be optically transmitted possibly or a very stable supply), so will try to resolve it on video. Thank you for your kind words :-D

@TheMrMKultra 4 жыл бұрын

Very cool video! Well made using overlays and picture in picture. Although it's not what I'm doing in my spare time, it's fairly interesting to follow your project. Keep it up!

@Dev255 4 жыл бұрын

Thank you, it's nice get positive feedback :-), it takes a time to edit but I think the end result helps others learn too.

@fredfarnackle5455 3 жыл бұрын

Very interesting video, thanks for posting. I look forward to seeing more. Subscribed.

@Dev255 3 жыл бұрын

Thank you for subscribing Fred, I am currently recording some video for the next one.

@ipadize 4 жыл бұрын

you could copy and paste from the tutorial. Also if you misspell something you can press the arrow up key and it will show what you have written before. basically you can press arrow up unlimited

@Dev255 4 жыл бұрын

Hi MMD, that is a very good point that I discovered later on, doh!. This would have saved me a fair bit of time :-D. Thank you.

@ipadize 4 жыл бұрын

@@Dev255 yes i noticed as well as i saw the other part of the video :D