Here is tool fixture which will turn you CNC mill to CNC lathe. With this tool fixture every tool can be adjusted for easy set up
Пікірлер: 51
@mikedevine46673 жыл бұрын
You make building and getting this stuff to work together look to easy.
@ContractCAD3 жыл бұрын
We've been clamping turning tools for years as a great way to modify tool holders. I'll never forget the look of horror when I took the idea into a new company (a company without proper machinists before I got there). This is a great set up though and something I've considered -- all except for the mounting of a chuck so thanks for that :)
@eugencsl3 жыл бұрын
Nicely done ! 👍🏼👏🏼
@drewgossage88423 жыл бұрын
Another great installment Vince👍👍
@advanceair3 жыл бұрын
Thx Drew
@marcingolab62273 жыл бұрын
I really need to get going on a project like this for my tool room mill because mistakes were made and I didn't buy a lathe for my milling shop before getting started. Some tool holders for my angle plate would probably do the job in conjunction with the horizontal spindle. Good job and the part came out nice!
@TrPrecisionMachining3 жыл бұрын
very good video vince..thanks for your time
@advanceair3 жыл бұрын
Thank you
@tonydique45542 жыл бұрын
Wow, that is very impressive.
@RobytheFlorentine3 жыл бұрын
Great video. Thanks for sharing :-) Regards form Italy, Florence
@advanceair3 жыл бұрын
Thank you
@stonecraft7453 жыл бұрын
The Chuck is scary as hell but nice video!
@advanceair3 жыл бұрын
It’ is ! and it so unnatural lol
@dimimexmaquinadosyautomati82173 жыл бұрын
Nice work. Is wonderfull. How do you realize the program in the cam software?. How do you take references for the tools, etc?
@volkansezer21323 жыл бұрын
very good idea
@higornatan99333 жыл бұрын
Like you are the best!
@janhbrenna42643 жыл бұрын
So cool, could you also make a video of the cam/programming side
@advanceair3 жыл бұрын
I’ll be using this on my next project, I’ll cover Cam part of it on that video
@janhbrenna42643 жыл бұрын
@@advanceair cool, im looking forward too it ;)
@soufianbenattia2532 Жыл бұрын
You are the bestttt
@airgunningyup3 жыл бұрын
very cool. id imagine the programming was more time consuming than the build ( loading and saving all the offsets for the tooling , the chuck face and so on
@ozmouthpieces2 жыл бұрын
Please, what is the code of this insert?! Your videos are great! Congratulations
3 жыл бұрын
omg, that why people so intelligent
@gwheyduke3 жыл бұрын
Did you build this mill too? If not what mill is it?
@rdc022712 жыл бұрын
Hello, What material have you used for the fixture plate? Thank you.
@DianTomov_ST_Dupont_Lighters Жыл бұрын
How to set my cordinate system? Do I need to make a custom post processor?
@GIboy1990 Жыл бұрын
But can you cut concentric threads on a rifle barrel?
@revenger21113 жыл бұрын
DON"T SPIN THE CHUCK WITH NOTHING IN IT!! It's very dangerous, the chucks can come lose and fly everywhere! Be safe!
@DPTech_workroom3 жыл бұрын
👍
@olivderpo2 жыл бұрын
what cam system?
@gerrit21073 жыл бұрын
im pretty sure the top side of a turning tool shank is on the same plane as the cutting edge, that would mean you can zero your y axis either on the shank or on the holder you made
@advanceair3 жыл бұрын
You are right. Thank you.
@gerrit21073 жыл бұрын
@@advanceair No problem :) I should add that for boring bars the cutting edge is on the center if the flats on the shank are dialed in
@matthewchastain1363 жыл бұрын
how does your spindle spin at such low RPM. I thought those type of spindles had a much higher minimum speed.
@advanceair3 жыл бұрын
This is 5.5kw very large spindle. I can run it as low as 900rpm
@unnamer3453 жыл бұрын
wow
@aquanaut63863 жыл бұрын
🤔 Now I'm thinking... a rotary attachment on the x-axis table with multiple tool clamps - (a vertical CNC Lathe automatic tool changer)... rotated into position via a servo motor, probably with some kind of mechanical air-assist locking mechanism... a kind of indexing plate to lock everything in.
@advanceair3 жыл бұрын
Don’t put that kind of ideas in my head! Lol
@SPRITUALAwkaining3 жыл бұрын
How to program this?
@advanceair3 жыл бұрын
I will show it on next video
@SPRITUALAwkaining3 жыл бұрын
Thanks 😀🙏
@StreuB13 жыл бұрын
Please for the love of god, do not spin up chucks that fast with nothing clamped in the chuck. The scroll can unwind and send the jaws flying. I have seen this happen 2 times on high speed CNC lathes.
@advanceair3 жыл бұрын
I have flat ring inside it 👍🏻
@StreuB13 жыл бұрын
@@advanceair 🙏🙏🙏🙏
@julikb3 жыл бұрын
Dont you think a guy who build machines like this knows best what to do?
@StreuB13 жыл бұрын
@@julikb No, not always.
@julikb3 жыл бұрын
@@StreuB1 Also not always advisors are right.In this case for example.He said how he did it.
@GReddyDaG3 жыл бұрын
500 RPM on an empty chuck.. don't do this at home kids! Maybe you should now make a mounting plate with a direct mount for your spindle?
@advanceair3 жыл бұрын
There is a flat washer inside the chuck. Would love to make direct mount to it at some point just need to figure out how to
@daboyakasha1013 жыл бұрын
@@advanceair buy another tool holder, something like a threaded body tool holder, or something with a lot of "meat" in and near the taper portion and turn the holder for an adapter directly on the spindle, then it'll be perfectly concentric.
@advanceair3 жыл бұрын
@@daboyakasha101 Working on something like that :)