CNC Router and Plasma Cutter

CNC Router and Plasma Cutter | Part 1 I

Рет қаралды 19,172

5 жыл бұрын

In this video, I start with the build of a cnc router and plasma combo. I don't have enough space for two machines, so I try to combine a router with a plasma cutter. In part 1 I build the control cabinet of the cnc.
music
--------------------------------------------------------------------------------------------------------
Track: Marin Hoxha - Endless [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
Free Download / Stream: ncs.io/Endless
--------------------------------------------------------------------------------------------------------
Track: Jim Yosef - Moonlight [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jim Yosef - Moonlight ...
Free Download / Stream: ncs.io/Moonlight
--------------------------------------------------------------------------------------------------------

Пікірлер: 38

@countryhandyman1064 5 жыл бұрын

Sam wonderful video. Its amazing you know how to do wiring like that and what things you need to build a table like that. I have tried to get into some stuff like that with little learners kits and I have never been able to understand it. Good job.

@phunkissartisticcreations2316 5 жыл бұрын

Hey you're talking! Great to see you and we'll be watching for the rest of the series.

@samsworkshopdiary5748 5 жыл бұрын

Thank you! Hope I find the time to finish it in the next weeks.

@alansalazar5493 3 жыл бұрын

the video look good , it good to see a clean job , but in not electronic parts information to learn something.....

@mikevdwerf 2 жыл бұрын

thanks so much

@SlowandExpensive 5 жыл бұрын

Nice work Sam!

@samsworkshopdiary5748 5 жыл бұрын

Thank you!

@jojosworkshop1344 5 жыл бұрын

Super gemacht, ich hoffe Du erklärst auch noch etwas mehr zu den verwendeten Steuerungskomponenten. Ich möchte mir auch irgendwann mal einen CNC-Fräse bauen, das größte Problem ist für mich die Steuerung.👍👍👍👍

@samsworkshopdiary5748 5 жыл бұрын

Hallo JoJo, ich denke wenn das Teil am Ende läuft (ich hoffe das es jemals läuft 😓), werd ich mir die Zeit nehmen und nochmal alles etwas ausführlicher erklären. Auf Englisch fällt es mir halt doch deutlich schwerer und dauert länger, aber ich möchte dabei bleiben, damit ich endlich etwas mehr Ansporn habe es besser zu lernen. Wenn es bei dir mal soweit ist und du eine Fräse bauen willst, kannst du gerne auf mich zukommen, dann hab ich mit meiner vielleicht schon etwas Erfahrung sammeln können und kann dir bei deinem Bau behilflich sein.

@jojosworkshop1344 5 жыл бұрын

@@samsworkshopdiary5748 Danke, werde ich im Zweifelsfall machen.

@nsbharathi4402 3 жыл бұрын

I am from India

@QUERBEET-DIES-UND-DAS 5 жыл бұрын

Hello electrical engineer, großes Kompliment, ich bin sehr erstaunt - kann aber leider hier nicht mitreden, weil ich keine Ahnung habe - aber davon viel! 😃 Sam, ich denke du wirst alles richtig gemacht haben, ich traue dir das auf jeden Fall zu! 🙂👍

@samsworkshopdiary5748 5 жыл бұрын

Danke Micha, ob ich alles richtig gemacht habe sehn wir dann erst am Ende 🤣, hab noch keinen Test gemacht ob ich mit der Steuerung auch einen Motor zum laufen bekomme.

@QUERBEET-DIES-UND-DAS 5 жыл бұрын

Und wenn nicht, dann wird dir schon etwas einfallen. Bin mir ganz sicher! 🙂

@DereksWorkshopAndProjects 5 жыл бұрын

So is this the kind of electrical work you do professionally? Very neat! At my regular job I work in a Dutch designed greenhouse and we have an electrician that works there from holland, he builds these electrical control boxes for all the automation through the facility. It’s pretty fascinating.

@samsworkshopdiary5748 5 жыл бұрын

Hi Derek, yes it's some of that, what I'm doing professional. But It's the first time that I build a CNC control cabinet, so I hope that it will work when I have finished the mecanical parts. I think the dutch are famous for their greenhouses. Much of our vegetable in Germany comes from them.

@DereksWorkshopAndProjects 5 жыл бұрын

Sam's Workshop Diary yes, I have heard people say they are “the Lamborghini of green houses” very cool places to be in. Good luck. I’m excited to see how it turns out.

@j.mateus8775 3 жыл бұрын

Ecxelente video friend, I would like to know where to get that port converter with the arduino nano

@fredulla7730 3 жыл бұрын

How do you connect nano arudino to the left? Good idea, circuit diagram, was that going well?

@michaelgalsim2461 5 жыл бұрын

Hi, I am planning to build a plasma cutter CNC and your work is really impressive. I would and I am sure others would appreciate if you can post a list of the components you used. Thanks

@samsworkshopdiary5748 5 жыл бұрын

Thank you for your comment! Please have a look at my last video there is a list in the description.

@SAMURAIX9909 5 жыл бұрын

Hello Sir, Can i have the parts list you used such as motor driver, motors and other components, I want to build this Appreciate your work a lot !

@samsworkshopdiary5748 5 жыл бұрын

Thank You for your comment. Please have a look at my new video. There are a few links in the description. If you have more questions feel free to contact me again. kzfaq.info/get/bejne/pNCpi9Cor9DShn0.html

@stanislasnguimatsa2555 3 жыл бұрын

Hi mister please what's the number of the card you are using for the parallel port I have a computer that does not have a parallel port

@samsworkshopdiary5748 3 жыл бұрын

It is this card www.rc-letmathe.de/CNC-Steuerungen-und-Interfaces/MDLCNC-Estlcam-Interfaceboard-fuer-Einzelendstufen?source=2&refertype=1&referid=173

@stanislasnguimatsa2555 4 жыл бұрын

please what kind of compressor i can use for a post up to 50A

@samsworkshopdiary5748 4 жыл бұрын

I'm using two compressor with approx. 150l/min. That's enough for 70A. So I think you should use a compressor with more than 200l/min. Normally in the manual of the plasma cutter is an information how much air you need, if you have something like that please have a look. If you can make breaks between the cuts a smaller compressor is also ok, thats how I worked in the beginning.

@stanislasnguimatsa2555 4 жыл бұрын

hello gentleman if he/it pleases you that is possible to have the diagram I have the TB6600 without Arduino

@santoshkumarsharma824 4 жыл бұрын

No clear diagram of wire

@suriyabala5860 3 жыл бұрын

Sir how you connect arudino nano in lpt port it's awesome idea , circuit diagram pls

@samsworkshopdiary5748 3 жыл бұрын

Thank You! the lpt port is only the connection to the cnc board, where are the terminals for the drivers. If you contact me on instagram or E-Mail (adress channel site) I can send you some documents.

@kraftlab.studio 3 жыл бұрын

@@samsworkshopdiary5748 Hi sir, great work. Would like to build my own. Kindly send me documents on how to build the schematics and requirements please. My email andy.warui@gmail.com

@nsbharathi4402 3 жыл бұрын

Sir your email pls ineed some details of drive and stepper model and other electronic

@stanislasnguimatsa2555 4 жыл бұрын

Hi please it is possible to have the diagram of the electronic assembly if possible with the names

@samsworkshopdiary5748 4 жыл бұрын

Hi, sorry but I don't have a wiring diagram. But here is a link where you can find some information about the electronic assembly: www.estlcam.de/schaltschrank_klein.php If you contact me on instagram I can give you more informations.

@jagsiragriculturalworks5946 4 жыл бұрын

Sam's Workshop Diary hello sir what's ur user name on insta

@samsworkshopdiary5748 4 жыл бұрын

@@jagsiragriculturalworks5946 Hi, it's samuels_workshop_diary