No video
3D printed threads - 3 ways to model them in Fusion 360
Рет қаралды 384,198
Күн бұрынI show you 3 different ways of modelling threads in Fusion 360. I'm showing you how the thread tool and the coil tool works. The last method uses a helical path to create any thread shape you like.
I share some best practice with you that I learned over the years and show you how to dynamically adjust the layer height to optimize the print time of your threaded part.
💚 Support me 💚
Patreon: / cnckitchen
Join as a KZfaq member!
Original CNC Kitchen Threaded Inserts: geni.us/CNCKIn...
Merch: teespring.com/...
Buy an Original Prusa i3 printer: geni.us/CNCKPrusa
PayPal: www.paypal.me/...
Shop at Matterhackers(US): www.matterhacke...
Shop at 3DJake(EU): geni.us/zHvnB
🎙Check out my PODCAST with Tom Sanladerer
/ @themeltzone
⚙ My gear (Affiliate Links):
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: geni.us/vEwqD
12-35mm f2.6 - Great allround lense: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
🌼 Even watching the ads before my videos helps me a lot!
🐦Follow me on Twitter: / cnc_kitchen
@CNCKitchen 7 жыл бұрын
What's your experience with 3D printed threads? Do they work for you? Did you get them to work with different materials besides PLA?
@mohammedabdullah3599 7 жыл бұрын
CNC Kitchen ABS works great, just a little bit tight which I need and it is very STRONG. l absolutely like your videos, awesome contents 👏.
@WetOlde 7 жыл бұрын
I normally go for a M3 M4 M5 M6 or M8 screw when i have to fasten it to something. I normally make these by using a tapping tool. I had a M6 screw 3D printed with a M6 thread by making it 6mm in diameter and then, cutting the thread. It's extremely easy in a hole (keep in mind the wall thickness!) and even though it is quite hard to do on a bolt, then i'd say. An M6x50 is possible to make fully 3D printed. I know it's kind of cheating, but for really well working threads, this is the way to do it
@TheOneAndOnIyCake 7 жыл бұрын
So any M6x50 or just the one thread size you've used?
@WetOlde 7 жыл бұрын
Cake well if its M8 you could get more than 50mm in length. i mad an M6x30 when i did it, but the rod was stiff enough for a 50mm length. the problem is that you have to cut it in a rod. too thin and it'll break, and same goes for a too long rod. I'm in denmark so my thread is either iso or DIN. at work I've tried a 1/4" and a 1/8" thread. worked like a charm! hooe it helps
@WetOlde 7 жыл бұрын
Cake well if its M8 you could get more than 50mm in length. i mad an M6x30 when i did it, but the rod was stiff enough for a 50mm length. the problem is that you have to cut it in a rod. too thin and it'll break, and same goes for a too long rod. I'm in denmark so my thread is either iso or DIN. at work I've tried a 1/4" and a 1/8" thread. worked like a charm! hooe it helps
@voidwanderer 5 ай бұрын
Six years later, this tutorial is still relevant and answered every single question I had about threads as a new consumer of Fusion 360 -- thank you!
@Steve-es3fc 3 ай бұрын
And it's still missing the 3rd method marker on the timeline :D
@BradfordNeedham 5 жыл бұрын
I wish there were a "Lifesaver" button I could press, so "Like" will have to do. I've spent the past day going through various videos (even from Autocad!) that end up saying something like "Well, the thread profile doesn't turn out exactly like you wanted, but it's close." Your technique #3 is perfect for creating a thread that has a custom profile. I like a custom profile because I can control the overhang and clearance (tolerance). I've bookmarked this video because it shows the right way to make threads, simply and clearly.
@scientist100 4 жыл бұрын
Solidworks has a tool called spiral for the path and it makes making the thread so much easier for custom threads.
@mrkeogh 4 жыл бұрын
Your trick of slightly adjusting the thread faces by 0.2mm and 0.1mm worked *perfectly* for me! Thanks a million :)
@stevekohler2876 4 жыл бұрын
I realize that this video is from 2 years ago and the menus have changed so when I figured out where the commands are in the newest version of Fusion this video is a lifesaver, thanks for your efforts to explain how these commands work, it really helps.
@TheCzarsoham 11 күн бұрын
This is a completely amazing video! For anyone trying this in 2024, use the Pull-Push tool for changing the clearance of the threads in method 1
@underourrock 2 жыл бұрын
Your videos have helped me with my 3d printing a lot. I recommend you quite often to anyone that wants to improve the physical properties of their 3d prints. This video, 4 years after you posted it, helped tremendously with the offset faces. Fusion 360's thread modeler is very weak, but that offset faces is extremely powerful. I have an M36 Aluminum Bolt that, based on measurements, is machines to be a fairly close fit. 3d printing a protective cap for the threads using the defaults in Fusion results in a cap that is simply too tight. My 3d printer is calibrated as closely as it can be, and often prints parts that thread or slip-fit together when I am in control of the tolerances. Just want you to know that even these old are super helpful. Thanks!
@JohnVanderbeck 5 жыл бұрын
This trick to adjust the tolerances when using the Thread feature was just what I needed! Increasing it by 0.2mm on the side and 0.1mm on EACH flank worked perfect for me on my Ender 3 with some older filament (which might be part of the problem there).
@georgeelsham 7 жыл бұрын
I never clicked model... that's why I always ended up printing cylinders 😂
@CNCKitchen 7 жыл бұрын
Glad you've learned something ;-)
@der-andyman 6 жыл бұрын
yep... sounds familiar XD
@CNCKitchen 5 жыл бұрын
This option saves rendering time. Having an assembly with lots of modeled threads will kill your PC.
@Javaritto 5 жыл бұрын
@powerChriZ The non-modeled option is useful for small holes or rods (think m3 size) that are too small to have threads printed, but should have threads cut. Fusion will provide the correct diameter for your hold/rod and document how you should cut the threads once the print is done. (Also it may use non-modeled threads in CAM but I don't know for sure)
@TheVideoVolcano 5 жыл бұрын
haha what a numpty
@ArcaneGaming 2 жыл бұрын
Thank you!!! this helped so much i was breaking my head. Guys dont forget to print at a lower layer height. Threads absolutely suck with .3mm
@valveman12 6 жыл бұрын
This is the info I was looking for. Just made two parts and threaded them. After printing, I tried to thread them together and it was tough. So found this video and glad I did because I didn't know you can use Model to adjust the thread tolerance. Brilliant!
@bj97301 7 жыл бұрын
The threading tolerance tricks are amazing. Thank you.
@TylerCaughill 6 жыл бұрын
Thanks, been struggling with threads and tolerance for a while and this sorted me out completely.
@garetha6838 7 жыл бұрын
I never knew making threads could be so simple thank you.
@MrPappy1990 6 жыл бұрын
My friend sent me this video as I am having to 3D print threads as I don't have the taps needed. Your video is so clear and easy to follow! You even helped me with an another problem I was having (trying to make a slot in a cylinder). I am now subscribed!
@erehiko 4 жыл бұрын
I've been struggling printing M16x1 so many times with too "tight" thread. I'm going to try your tips.
@superkillr 4 жыл бұрын
So happy I found this again. I was having REAL REAL problems dealing with threads. I basically had to chase all threads with a tap and die. Now I don't.
@martyngasson7003 4 жыл бұрын
Thank you this was the easiest to follow and to understand out of all the thread guides I have watched 👍
@risaoram 2 жыл бұрын
I just printed my first 3D print last week making 3 different nuts and bolts to explore the SLA resin printer’s tolerance. I had okay results on my thread quality, but not crisp and clean. I think because of the supports blocking many of the threads, printing at 0.1 mm coarse layer setting, and my overall inexperience. Now I’ve been struggling the past 2 days trying to make custom buttress threads to replicate a 100 mm wide mouth plastic Nalgene cap with some additional mods. I’m a noob and was following another tutorial with mixed results. The third example of yours pointed out a few important details I kept getting confused on - basically external threads but modeled “inside” the cylinder. I didn’t realize that modeling it inside the cylinder was an option! That now accounts for my sizing being off the first few (ahem 20+) times. The chamfer part was also an important thing for me to see here since my design requires this as well. My part that I’m trying to model after/replicate is so tiny and really hard to get a good look at without cutting it in half. I wish someone could share semi-buttress thread profiles for SPI 100/415 Nalgene closure with me or point me to any good resources for plastic thread standards used in scientific and laboratory settings. Thanks for the informative video!
@Grahamaan27 4 жыл бұрын
15:20 "it sometimes screws it up" ... Wait I thought that's what we wanted! 😂
@veluthe 2 жыл бұрын
Once again, you helped me out thanks
@jerryocrow1 6 жыл бұрын
Excellent instruction. I appreciate the detail, research, libary, and of course, alternative methods.
@alexandrevaliquette1941 6 жыл бұрын
Happy Kitchen! I was afraid to go with Fusion 360 for my first CAD software for 3D printing. You maked it very easy to understand, thank you very much for sharing!!!
@carters2 Жыл бұрын
I just used this advanced method the other day to model some buttress threads which wasn’t something fusion can do out of the box. Very neat technique
@darksideadv 4 жыл бұрын
It is the best video tutorial I've seen about types of threads. Thank you so much.
@adamjensen7972 4 жыл бұрын
Ich habe jetzt schon ca 4Kg an Pla gedruckt und die meißten Teile hatten Gewinde. Hab mich schon gewundert das die Schrauben so schwer rein gingen. Ich hatte angenommen das M6 und kleiner nicht gedruckt werden kann und das der Slicer deshalb einfach einen Zylinder druckt..... Danke für das klasse Video!
@RevampedOutdoors 6 жыл бұрын
Thanks for the help on that, the section analysis is really nice to make sure it is working. Couldn't quite see if the threads were matching up.
@JulianMakes 4 жыл бұрын
Very helpful Stephan cheers! Printing some threads right now!
@mekatrol 4 жыл бұрын
Fantastic, still very relevant and best explanation on KZfaq!
@jameslaine2472 5 жыл бұрын
Thank you for this; I was very confused about what the 'class' option meant in Fusion 360's thread tool. And I was also finding the inner and outer threads did not fit together at all after printing, so I am hoping that your method of adding more spacing tolerance will come in handy.
@Deefolt 4 жыл бұрын
Learned something again. Very helpful tuts. 👍👍
@vincentbarkley9121 2 жыл бұрын
Yet another terrific video. Thank you.
@marcellemay7721 7 жыл бұрын
Great explanations of making threads in fusion 360. I just started in f360 and I really like it....It's very powerful.
@WildRoseBuilds 7 жыл бұрын
Very helpful thanks!
@MrMalthusMusic 7 жыл бұрын
This is fantastic! I have a broken filter on my air compressor and wanted to reprint a new one but wasn't sure how to model the threaded section of the old one as I am primarily a Sketchup user and making threads in Sketchup is kinda crummy. This video has given me all I need to know and some useful skills for other prints. Thanks so much, your video was nice and concise!
@callega 5 жыл бұрын
Your video was very useful to me!!!! I had some tolerance problems in my threaded prints and with the Press Pull tool I fixed. Thanks
@Shabazza84 3 жыл бұрын
Excellent video.
@Allan-mf1he 5 жыл бұрын
Very complete and well structured tutorial. Thanks.
@IanDouglas 5 жыл бұрын
Thanks Stefan, this was extremely helpful!!
@jjcc8379 7 жыл бұрын
Just as an afterthought : If you know which gap tolerances your printer can handle ... with the section tool you can see if you can print thread rod and nut at the same time and position! Very nice tutorial, I didn't know Fusion 360 had such catalogue of threads by default ...
@CNCKitchen 7 жыл бұрын
Yup, you're right. The thing is that the threads can have some very steep overhangs which can negatively influence the tolerances, so you might need to make it a little bit more loose.
@MichaelAlm 5 жыл бұрын
This was super helpful, thank you!
@dinastia3476 7 ай бұрын
excelente tutorial, muchas gracias!!
@xaexeer7429 5 жыл бұрын
thank you so freaking much! I could not figure out how to get my slicer to print threads! please do more fusion tips like this
@garthhowe297 7 жыл бұрын
I liked the first two methods ... the third one caused a small explosion in my brain... great video, thank you
@constantinosschinas4503 5 жыл бұрын
i think it exploded your head because the first step is not required. just create a custom profile, then a helix, then sweep the profile on the helix and use that to cut the cylinder.
@Erknlssn 4 жыл бұрын
@@constantinosschinas4503 How do you create a helix in fusion 360? :) Only found this workaround so far
@spikekent 7 жыл бұрын
Awesome video as always Stefan. Thank you.
@stephenmacknik3212 3 жыл бұрын
We have a lot of problems printing threads in peek. Is there a rubric for determining the finest thread sizes/pitches that are possible for a given material/nozzle/temp, etc?
@thomasweyermann5848 4 жыл бұрын
I had NO idea you could move the constraints to the floating window. Coming from solidworks, this discovery is a big win!
@JohnHoranzy 6 жыл бұрын
Thank you for this most excellent and concise tutorial. Pointing out the "Modeled" option just saved me hours of wasted human and print time. I see in your other videos that you are creating a lot of Primary information from your own research. I just sent you 12 Euros via PayPal. Please confirm that you received it and I am curious about how much of the 12 Euros that you actually get. Keep up the good work!
@CNCKitchen 6 жыл бұрын
Thanks a lot! I'm happy that I could help. Received your donation, thank you so much! (Paypal kept 0.82€ by the way)
@timothybolton7852 5 жыл бұрын
Awesome tutorial on threads! Thanks for the help!
@x9x9x9x9x9 7 жыл бұрын
Kinda off topic here but I have noticed in the 3d printing community. There are a lot of people from europe. Its really nice because if I have a question about something at 4am my time I don't have to wait a while for an answer. Sure there are language barriers at times but its awesome. I do wonder though why this is. In the drone community it was mostly US people same with twisty puzzles.
@dewexdewex 6 жыл бұрын
Maybe it's because Reprap originated in the UK, Arduino was Italian and much of the driver software was written by Central Europeans. Extensive investment in CS education across Europe has likely driven this, I suspect. Hardware development and low scale manufacture happens in Europe, but the large scale manufacturing, as ever, comes from China. These are down to labour rates.
@9001greg 5 жыл бұрын
It's like that in nearly anything. Where do you hangout that any subject doesn't have a bunch of people from around the world?
@oldfarmhand7714 7 жыл бұрын
Thanks for posting this video it's very helpful in learning fusion 360 and what it can do! I hope you do more.
@xldz6612 6 жыл бұрын
very good. im using solidworks seems there is no question about the tolerance and etc.. now im starting from zero for fusion 360
@mudaserawan1457 7 жыл бұрын
Excellent video. Really Helpful. Thanks
@Audio_Simon 4 жыл бұрын
How to adjust tolerance - Exactly what I needed, thanks!
@ilsQ 4 жыл бұрын
Thanks !!!! Had problems with the internal thread.... stupid modeling setting 😂👍👍👍
@AirRider-ez5of 2 жыл бұрын
Thank you for the great video! The first thread I printed was way too tight, with modifying the thread surfaces it should probably work now! Greeting from Germany ;)
@kurtlindner 5 жыл бұрын
This was very helpful and well explained.
@Kangurosik 4 жыл бұрын
I'm a fresh owner of a engineer deree, so I make a decision to buy my first 3D printer. Your videos are for me like a mantra. Hope with your advise my Anycubic Mega Zero will work fine
@thoxin942 5 жыл бұрын
Thanks a lot. Your fusion 360 tutorials are great. Keep it up.
@KevinSmith_777 4 жыл бұрын
Thank you! Exactly what I was looking for.
@929ms 5 жыл бұрын
Thank you so much, best tutorial on KZfaq!
@donreichert1807 3 жыл бұрын
very well explained, thanks
@Veikra 5 жыл бұрын
This helped me, thank you and have a big thumb up
@rickharriss 4 жыл бұрын
Where the threads are fairly small I make a suitable size hole and tap it with a standard thread tap.
@pocomaxa6692 5 жыл бұрын
Great video, detailed explanation. Many thanks!
@gaetano222 7 жыл бұрын
Excellent video, thanks for sharing!
@ClownWhisper 2 жыл бұрын
The last method would be very very good for creating a custom auger bit I have a project that I might be able to use this then thank you very much
@igorvaz3871 5 жыл бұрын
Ich bin bewundert mit dem Inhalt Qualität Ihr Videos, grüsse von Brasilien
@christelledeneau7461 5 жыл бұрын
Great video, super useful, thanks Stefan !!
@AthanCondax 7 жыл бұрын
Great video man! Very useful
@Alexander_Meyer 2 жыл бұрын
Youre a life saver! :D
@saltontheshelf 4 жыл бұрын
Great video! Exactly what I needed to know. 👍
@fyerr Жыл бұрын
Fantastic helpful video than you heapss
@MrFixel112 4 жыл бұрын
Just a quick update to the newer version of fusion: there is a new point in the dropdown-menu from the sweep command. Instead of using a guiderail you can use a guiding-surface. In this case it would have been the bottom of the model. It doesn't change the outcome. I like it better, since you have no (annoying) confusing guide rail in the model.
@mechsavvy9067 Жыл бұрын
Thank you for this. Stumbled across your comment and it fixes where my thread wanted to twist following a single rail.
@zackmcdonald5091 5 жыл бұрын
thank you i didn't know about the 3d sketch geometry.
@daniel-pablo 6 жыл бұрын
There is a helix plugin you can download for fusion 360 if you are on Windows. Just Google for "helix plugin fusion 360" it's called helix spline sketcher and it's on the Autodesk app store. Used it for Make Anything's springo tutorial and it would help with the third method.
@bullzebub 4 жыл бұрын
this is why i started using fusion :D
@TheRocker991 4 жыл бұрын
You are the best.
@jhbutch 7 жыл бұрын
Great stuff thanks I learnt a lot.
@AlexanderRomanovsky 2 ай бұрын
Thank You. I have no luck (so far) to design NPT threads. Have You tried?
@jony9259 3 жыл бұрын
this might be a silly question but how do you know/measure the thread type of a real object? I mean how did you figure out your faucet thread was G3-1/4?
@thaershaheen2946 4 жыл бұрын
Many thanks .
@vichtor 5 жыл бұрын
Absolutely brilliant (or as Germans would say: nicht schlecht), answered my question perfectly!
@nathanjaker 5 жыл бұрын
Helped a lot for my project, thanks!
@mam1627 4 жыл бұрын
Great lesson! Thanks...
@76Raby 7 жыл бұрын
Thanks for those tips.
@postpone777 6 жыл бұрын
Thanks a lot for sharing such a great skill...
@sebaseba2450 6 жыл бұрын
Thank you ! You are the best
@ccleorina 6 жыл бұрын
Thanks for this vid... it help me alot on Fusion 360
@westEOD 5 жыл бұрын
Please explain why you would choose to create a bolt with a diameter of 10mm and a nut with inner diameter of 8mm... and how on earth they end up fitting together. What's making you choose those numbers? Is there some sort of formula?
@dan55178 5 жыл бұрын
Awesome video!
6 жыл бұрын
Oki, I understand, threads command is good for us lol. Great video, thx, I moved from Solidworks to Fusion 360 for manies raisons but threads is enought to change ;)
@dnacious238 4 жыл бұрын
Thnx dude, now I know what to do :D
@maurorondini4786 5 жыл бұрын
Thanks for sharing. I'm interested especially at the third method but I was wondering what's the esiest way to obtain the correspondent female thread. Can you suggest? Thanks
@bynesetcustoms 5 жыл бұрын
i learned a lot. now to make my ventilation duct for a car project installation ready with this in mind! :) thanks!
@tomherd4179 5 жыл бұрын
Like your thread descriptions. I made one change and got totally confused with the Section Analysis picture. Instead of the round nut, I made a polygon and the view REALLY changes! Can you possibly shed some light on what is going on? Using the newer version of Fusion if that matters.
@derekhawley9660 5 жыл бұрын
Brilliant
@hamiltonpianos 5 жыл бұрын
Nice video, learned some useful stuff. However, I wish you hadn't fast-forwarded the sketch on the advanced thread! I ended up watching through it on 0.25x playback, as it seemed like the constraints you were applying were rather important to the final outcome! :)
@erlinghagendesign 7 жыл бұрын
ausgezeichnete Anleitung. Mehr davon! Herri / Gruss aus Kunming China
@HalfTonEnterprises 4 жыл бұрын
I have an issue with a threaded bolt which has a non-threaded stud extending past the end of the threads. I print it with 5 perimeters and the stud and threads are very strong. However, the point where the end of the threads and the stud meet is very weak and breaks right at that point. I believe its because the stud in smaller that the bolt and the perimeters do not match hence a very weak point. I could print it with 100% infill but that seems wasteful. In F360 I have extruded the end of the stud back into the threads hoping that would continue the 5 perimeter profile from the stud into the bolt but that's not how it works...at least Cura 4.5 did not slice it any differently. Since you are always interested in making things strong, I thought you might have a suggestion. Thanks
Christopher's Factory
Рет қаралды 29 М.
Made with Layers (Thomas Sanladerer)
Рет қаралды 242 М.
My Tech Fun
Рет қаралды 2,6 МЛН
Lost In Tech
Рет қаралды 174 М.