Coding a BMW E39 using NCS expert and NCS dummy

Рет қаралды 16,056

3 жыл бұрын

Quick video explaining how to code an E39 using NCS expert and dummy.
2 items in particular as requested, but the same method can be used for any other module.

Пікірлер: 22

@seanlarge4094 2 жыл бұрын

Thanks for the info, Ben. I have an '03 e39 530i in which I replaced the ABS module with a rebuilt unit (not my original). Unfortunately the rebuild was coded for an automatic trannie and not my 5-speed - and thus my DSC remains disabled. Can you possibly point me to which coding module to access to change that option? I have already installed all the BMW Tools & I have the K+DCAN cable, so I should be set to go.

@TheErki8 Жыл бұрын

thanks for the info

@GenaSLASH 2 жыл бұрын

Thanks for video. Today I read Ecu from my E39 and module- RAD is not in list, but I use monoblock radio. Why? Also, I have two modules- Mid+Type_Dec. But on MID, I dont see frecuense and time... So, I use only monoblock Radio... Best regards from Minsk, Belarus!!!

@meguinness1116 2 жыл бұрын

NCS expert on my version doesn't show the NCS dummy profile???? any ideas? thanx

@SiLenc3Ninjazx 2 жыл бұрын

hi, which cable do you use? i have a 1999 e39 535i with the obd1 under the hood in the engine bay and one obd2 under the light controllmodule. Which one did you use for coding? greetings from deutschland

@ogclassicjones332 2 жыл бұрын

From what I understand, you would use the one under the hood. I have a 2000 528i and i can access all modules using the round connector under the hood. I will be doing some diagnosing today and will report back

@C_Productions Жыл бұрын

As long as there is a round connector on your BMW, you always should use this one. Because not all of the ECUs are accessible through the OBD2. This changed once the OBD2 became standard in about 2002 and simultaneously the old round connector was no longer included.

@BLue87CrxSi 2 жыл бұрын

Is it best to use with the engine bay round connector or would a usb obd2 work also for e39 540?

@benhawkes111 2 жыл бұрын

I think it depends on the age of your car, this was on the inside obd port, but some cars you have to use the round one for certain modules!

@BLue87CrxSi 2 жыл бұрын

@@benhawkes111 awesome thanks I got a 98 so I suspect round plug best

@benhawkes111 2 жыл бұрын

@@BLue87CrxSi yeah mine is a 2003 and I'm pretty sure it doesn't have the round plug

@izahariev96 7 ай бұрын

thank you

@cellontop Жыл бұрын

I have a 525i and the key won’t even turn to start it will I still be able to use my laptop with it

@benhawkes111 Жыл бұрын

Unlikley, you need to have power to the dash etc to get it to read

@paperandmedals8316 Жыл бұрын

Can this be done just with NCS Expert? I want to disengage auto lock.

@benhawkes111 Жыл бұрын

Not sure, I assume it can be but you have to make sure your adjusting the right thing

@paperandmedals8316 Жыл бұрын

@@benhawkes111 why did you use NCS then switch to PA Soft?

@TomWitt-mw9ku Жыл бұрын

Do you have a link to download ncsdummy that you can share?

@benhawkes111 Жыл бұрын

You want mike's easy BMW tools, easiest way to get it all working www.bimmerfest.com/threads/mikes-easy-bmw-tools-package.879366/

@kazlurudosambasadorius8584 Жыл бұрын

Hey, can you make a video, how to solve “vin is faulty” problem? Or at least explain how to make it work

@daniel-rz6bd Жыл бұрын

I have this same issue please let me know if you figured it out

@1scorp1on5 Жыл бұрын

@@daniel-rz6bd Try to use obd connector from engine bay