Nick is a monster. You guys are lucky to have such a skilled mechanic near you.

I got those same UPR coilovers recently. Your underbody looking good!

Love the videos broo! Keep this shit going. Ya Got some love over here down south haha!

Love the videos. I'm a mustang believer now. These cars are factory awesome.

great job and great patience nick

What kind of Viking coil over set up are you using what spring numbers and what strut set up are you using

Love the channel guys, just parked my 1998 even though it's in perfect running condition. Driving a Honda to say save money to buy parts😂👌🏽 but one thing I always wanted to see was a super clean 2v engine Bay! Next project?

Wow Andrew very nice!! When you have the turd painted it will look amazing! Plus nobody will know whats underneath!

I used to live 7min away from that plaza. Pretty cool to see actually :)

This may be a dumb question... but what’s holding the motor up once you pull out the stock k member?

First off, love your Cobra, it's the same color as mine. Also, your vid of your car on the dyno was a big reason why I chose the VMP blower. Should be in next week! I would love to be able to chat with you about your setup! Thanks! Love your channel!

Lol Andrew, seeing the springs come out like that reminded me of my springs. I can't get lowering springs just yet but I wanted to lower my car because I hated the 4x4 look. So we just cut my stock springs a bit. When we took them out, we found that at least 3/4 of a coil was RUSTED to the control arms in front, and it was a clean cut off of the rest of the spring..

Do you know what the two extra thick washers that come with UPR A Arms are for?

Yeah.. I so want a tubular K!🔥

I need help! I crashed my 97 mustang into a palm tree trunk and now I have my front right tire pushed back. it rubs alot on my fender. I've put in new struts but still the same. I also notice that my wheel ,when straight, it's slightly to the right. Would I have to change the k member or would I have to replace my a arm, steering rack, outer tie rod etc?

I think you just convinced me with he next mod on my 3V. How much of a difference is the NVH? How rough is the ride now?

So does this suspension setup negate the need for a track bar?

What pound spring rate did you end up getting? i have an 02 GT that ive been contemplating doing this but i have no idea what spring rate i should get

I love turdzilla it is a beautiful car and I think it's going to turn out to be something very interesting keep up the good work.

Nick grate job bro 💯🔥

What spring rate did you go with? I have a full UPR set up (basically identical w/o the viking shocks) and it rides like a stiff boi honda lol.. my rates are 10/250 and 10/150.

What did u do about the rear get coilovers kits for that to or just springs ?

I know that this video is old but did you get the 0-2 in ride height or the 2-3 inch?

I need new upper control arms tire rods and a pro charge for my charger

what swaybar did you run on this? front n rear? did you run into any clearance issues?

What type of wing does that mustang have

Did away with the sway bar so no more stabilizer links eather ?

What spring rate did you use?

where is Ashley at

Did y'all square the k member or just bolt it on and hope for the best? If the latter, did you have any issues afterward?

what did you guys hold the engine up with. also that guy is single for sure haha look at that back hair out of control haha

Hey, bud if you don't mind me asking about what did you pay to have this installed?

I love these Turdzilla videos, I can't wait to build my 2v

That stang is sitting pretty

Am I missing something or is that jack under the oil pan the only thing holding the motor in place while the original K member is out?

How much did it cost for the install

if it rides good I'll have to do a similar setup on my sn95

So when the motor mods coming 👀👀

Rim and tire set up? Dementions?

It's gonna drive like a brand new car. :-P

@Mustang Lifestyle Did your front wheels require a spacer to clear your springs?

what is holding the engine in place while the subframe is disconnected?

How much did all that run you

all you did was trans jack the motor? anything else securing it while the subframe was being replaced?

whats the whine on the 2v? its not boosted right? i ask because ive got the same whine on my 2v but its automatic so it only happens when theres about 50% throttle givin above 2500 rpms.. i just figured it was the cams or the plastic intake that sucks so bad. ALso, im not talking about the timing chain whine that is notorious on the 2v in the high rpms..

is there another way i can put longtube headers on without taking out the k-member?

I love it very good 😇

review the coil overs please, id like to know the difference. i have a sn95 i want to put coil overs on it

um i just noticed that the cam cover on the driver side oil fill is the older non pi style. the motor been replaced on thiscar?

im so glad i live in a dry state (AZ) lol I cant handle rust lol

Damm !!! 3 years pass and you wen up in weight and power😎

so I have a 2010 mustang and recently removed the cats and starught piped it and it is loud Af it has this awful raspiness around 2300 to 3400 rpm range wat can I do to kill that I heard 2 j pipes would work any suggestions

also u said Nicks info was down below but i dont see anything wth "Nick" in the description.

Hey man, what front seat bar and tie rods did u put back on with the new a arms?

New suspension looks awesome!!!!!!!

I think that piece of spring is part of the original spring

I’m thinking about changing the K-member on my 2003 GT, how much weight can the oil pan support if I was to do it in my garage? Can it support the whole engine while the stock k-member is out? Thanks!

Oh, NM I just realized how long this video was uploaded, my bad! Still, nice!!

Did the kit come with the shocks?

do yall ever travel to the east coast? i got a single 62mm hellion turbo on a 2001 cobra with a bunch of mods i desperately need to tune it to ct weather and 93 octane, already has everything she would need just needs some love dialing in the motor to work well in combination with the turbocharger system air intercooled as well, ton of parts i would love to even road trip your way and get this baby dialed in if you could help?@ I have the delta force interface software i saw a cd and a usb port so im guessing ill have to use my macbook or maybe my ipad if i can find the right apple cable if it even exists.. but yea let me know if you can help me tune this baby in its a legit 01 cobra needs some love feels like fuel cuts if u get on it and spool up the turbo and shes blowing white smoke ever since i put shell v power 93 octane in her.. service light came on i bought a new fuel cap with key and it went off in a couple miles... please help i hope this isnt a blown head gasket!! also needs some gasket for the driveshaft mount that mounts up to the tranny.. plz help stang bros..!! im in CT but would be willing to roadtrip and meet up with some dope ass mustang heads that can help me get my 4 valve running perdy again.. thanks god bless speed safely, -P3T3R

what exhaust set up is on turdzilla? does it shoot flames

If you take a pic of the broken spring and send it to eibach they will send you new springs no questions asked. They did it for both my brother and I.

How much did the tubular k member cost?

Can you use stock arms with that upr k member?

if you don't mind me asking? how much did this run you. my 2v vert needs an overhaul. lowered on springs now but looking at coilovers

Should've done longtubes while the k was out

Did you had to weld anything?

Starting to turn into a track car. How about a coyote conversion?

I actually liked the music

Do a big supercharger

Hurry up Nick and bring that pony to mexico. Still waiting for a reply on that 4r70w swap 🤔

Gotta get a new hood soon

How many hp does the cobra have?

Music is annoying

Goddamnit. Now I miss my 2V, again. FML...

needs new front tires for sure!

hey mustang lifestyle can the turdzilla make as much horsepower as the cobra

Hey

Don't Need the Music. Why don't you get the moderator to help you? AK

Turdzilla vs Leroy !!!!

Maybe just my OCD, but why not clean, pressure wash and paint the rack and pinion? Also all the other miscellaneous parts while you are under there. If you are going through all this effort already it should be worth it no? Either way props man👍

How is the turdzilla so loud ? Tell me your secret lol

holy shit, a man wearing lipstick.

The music sucks!!

O'Reilly > Autozone

I know the car is call the turd but there no reason for the engine compartment to look like a turd. it needs a deep clean and detail.

auto x ... 😷😷😷😷

Ls swap turdzilla🤓😏

wasting $ on a 2V - very juvenile