HOW TO PAINT: Wheels and tires in 1/35 scale, tutorial

Рет қаралды 14,411

Жыл бұрын

Today I would like to show you my ways of painting wheels and tires in 1/35 in different weather conditions. I tried to prepare each wheel in a simple way so that beginners can copy my ideas and use them on their models. Dry mud, wet mud, snow, dust and water on wheels are show here.
You can use these ideas on different 8x8 vehicles - Stryker, Lav, Aslav, Boxer, BTR, Rosomak, VBCI, Centauro, Bumerang and any others.
This is tutorial for beginners but also some more advanced modellers will find something interesting in my how to paint episode.
⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️
Support my work and be my Patreon - / coldemonspl
DON'T CLICK THIS! - tiny.pl/9g5bb
Instagram: coldemonspl
coldemons.blogspot.com/

Пікірлер: 139

@coldemonspl Жыл бұрын

Use 7days free trial to check my Patreon and enjoy with the content! You can surf on my page with no limits, watch and download all superb high resolution pictures, watch progress shots, check stories with unpublished in other medias models, read the articles and enjoy other benefits!!! Just try for free!!!

@innerlight7018 Ай бұрын

I love this video. No bla bla, just right to the point.

@coldemonspl Ай бұрын

Thank you very much buddy! :)

@wellardme Ай бұрын

Finally! A very detailed explanation for those getting into the hobby. Thank so much for this amazing video! You're a top modeller and have super teaching skills!

@coldemonspl Ай бұрын

Many thx mate! :)

@hanawahmed2609 3 ай бұрын

This video is helpful and straight to the point

@coldemonspl 3 ай бұрын

Thank you very much buddy! :)

@richardroy61 5 ай бұрын

After 25 years of trying to clean the mud/snow/detritus from the vehicles I used in the army, it pains me when I intentionally add these elements of "truth" to my models. Thank you for the variety of effects possible.

@coldemonspl 5 ай бұрын

Thank you very much! :)

@alb639 2 ай бұрын

This is one of the best videos on KZfaq teaching weathering. Everything in this video can also be carried over into weathering stairs, the body of an off-road truck or military vehicles, a path near a stream, war-torn areas that is muddy or dirty...the possibilities are endless. You might need to tweak a step here or there, but I keep coming back whenever I want to weather something in my hobby. Thank you, coldemonspl.

@coldemonspl 2 ай бұрын

No problem! Thank you very much! :)

@michaelclarke8507 Жыл бұрын

Like it a lot will keep this for my Australian Vehicle tire’s that need the work you show great ideas for all Trucks too.

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@mirage3rd 29 күн бұрын

Great work! So much above my pay grade...

@coldemonspl 28 күн бұрын

Many thx mate but I dont understand "above my pay grade" - could you explain? :)

@mirage3rd 28 күн бұрын

@@coldemonspl It means that your level is WAY higher than mine! I'm very, very far away to do what seems so easy for you ;-)

@coldemonspl 27 күн бұрын

@@mirage3rd thx mate :)

@Jeremiah_Johnson139 5 ай бұрын

Wow! This is the coolest and most attention to detail on wheel weathering I've ever seen!

@coldemonspl 5 ай бұрын

Many thx! :)

@jamesmcansh6393 Жыл бұрын

Great tutorial just what I was looking for thanks so much !✌Canada✌

@coldemonspl Жыл бұрын

Thx a lot mate! :)

@abitoria3310 Жыл бұрын

never tired🤣 watching your videos😂

@coldemonspl Жыл бұрын

Thanks for having my back mate! :)

@flying_khiwi Жыл бұрын

Great video on how to weather wheels!

@coldemonspl Жыл бұрын

Thx a lot mate for your comment!! :)

@Hori_Ado Жыл бұрын

Great tutorial. I'm gonna use these techniques for sure. Thanks, coldemonspl.

@coldemonspl Жыл бұрын

It's very easy, just try it! Good luck! :)

@glenflanderka6504 Жыл бұрын

Another great technique video. Many thanks.

@coldemonspl Жыл бұрын

Thank you very much buddy! :)

@andrewmeasey4330 Жыл бұрын

Nicely done. Will use techniques going forward

@coldemonspl Жыл бұрын

Thank you very much! :)

@AndreSilva-wh4vn Жыл бұрын

Thank you! It was very useful.

@coldemonspl Жыл бұрын

Thx a lot mate! :)

@stuartosborne6263 Жыл бұрын

Some great ideas there, thank you for sharing.

@coldemonspl Жыл бұрын

Many thanks! :)

@snajp8229 Жыл бұрын

COLDEMONSpl fajna książka :D

@coldemonspl Жыл бұрын

Dzięki! :)

@tedpilchak7096 Жыл бұрын

Thanks! I learned a lot!

@coldemonspl Жыл бұрын

Thx a lot mate! :)

@oliverlazzaro3570 Жыл бұрын

very helpful tutorial thanks man

@coldemonspl Жыл бұрын

Thank you very much! :)

@jrrd65 Жыл бұрын

COLDEMONSpl great tutorial

@coldemonspl Жыл бұрын

Many thanks! :)

@pascalzandt6824 Жыл бұрын

Liked that you showed multiple finishes in one video.

@coldemonspl Жыл бұрын

Thank you very much buddy! :)

@windomearle5396 Жыл бұрын

Good job. Looks awesome.

@coldemonspl Жыл бұрын

Thx a lot mate! :)

@jong6856 Жыл бұрын

great tutorial once again!!

@coldemonspl Жыл бұрын

Thank you very much buddy! :)

@tpaul802 Жыл бұрын

Great effects!

@coldemonspl Жыл бұрын

Many thanks! :)

@afv8967 Жыл бұрын

Me gusta muchísimo, buen trabajo y muy buenas ideas, gracias

@coldemonspl Жыл бұрын

Thx a lot mate! :)

@davidgray8681 Жыл бұрын

COLDEMONSpl Good informative video. I'll try some of the techniques next time I do a wheeled vehicle.

@coldemonspl Жыл бұрын

Good luck! :)

@Th.M. Жыл бұрын

Beautiful and inspiring! Love your videos!

@coldemonspl Жыл бұрын

Thanks for having my back mate! :)

@dainiusltu5945 Жыл бұрын

@COLDEMONSpl good video! I was finishing assembling MATV and was looking for good ideas for dry dust / mud tires technique. And this video is helping, greetings from Lithuania 🇱🇹!

@coldemonspl Жыл бұрын

Thank you very much! :)

@coldemonspl Жыл бұрын

The machine pick you up as a winner of the book! Please let me know on email! Congratulations!

@ada42klm Жыл бұрын

Very nice results my friend. Those wheels look worn out, the microballoons and the pigments makes the whole thing look spot on. Very clever! Cheers .

@coldemonspl Жыл бұрын

Thank you very much! :)

@tjmisiolek6181 Жыл бұрын

Incredibly realistic and simple enough that I can do it too! Thanks!

@coldemonspl Жыл бұрын

Many thanks! :)

@kierang3815 Жыл бұрын

Excellent. Certainly the best I've seen on how to weather rubber tyres. Definately some ideas there that I will use in upcoming builds. Thank you for these hints.

@coldemonspl Жыл бұрын

Thx a lot mate for your comment!! :)

@goforitpainting Жыл бұрын

Really cool tutorial.

@coldemonspl Жыл бұрын

It's very easy, just try it! Good luck! :)

@dogforeyals Жыл бұрын

outstanding work...:)

@coldemonspl Жыл бұрын

Thank you very much! :)

@fatrat3157 Жыл бұрын

Awesome sauce

@coldemonspl Жыл бұрын

Many thanks! :)

@billray7703 Жыл бұрын

Amazing work I’m learning a lot

@coldemonspl Жыл бұрын

many thx! :)

@agnestromberg Жыл бұрын

@coldemonspl Great work, really inspirational. I really need to build a vehicle with wheels soon 😊

@coldemonspl Жыл бұрын

Good luck! :)

@milossacha3255 Жыл бұрын

@coldemonspl Very good and inšpiratívne video: I'm going to try it in my next builds. Thanks a lot!

@coldemonspl Жыл бұрын

Good luck! :)

@mainoffender27 Жыл бұрын

Will come in handy when i build up my M8 Greyhound. Cheers.

@coldemonspl Жыл бұрын

It's very easy, just try it! Good luck! :)

@graemebrumfitt6668 Жыл бұрын

Great tutorial Cold Dude, got me a Thunder Model Scammell Pioneer SV/2S "BEAST" me thinks this will come in useful! Started but not quite finished a tamiya quad gun tractor its going to be desert fasion (DUNE) so I cut a few chunks out of the wheels/tyres were rocks had cut into them and sanded some sides down to simulate rubbing on said rocks, the efect was rather smart if I may say so! Stay safe n well Dude. TFS, GB :)

@coldemonspl Жыл бұрын

Thx a lot mate for your comment!! :)

@obw71 Жыл бұрын

Always cool Videos 😉

@coldemonspl Жыл бұрын

Many thanks! :)

@cushionbelly2519 Жыл бұрын

Amazing tutorial. Thanks mate. COLDEMONSPL

@coldemonspl Жыл бұрын

Many thx mate! :)

@ivanbordignon7878 Жыл бұрын

You should trademark the accelerator 😂. Good video, thanks for sharing!

@coldemonspl Жыл бұрын

Haha you're right! :) Thank you very much! :)

@nikostzianakakis7750 Жыл бұрын

Thank you for the informative and interesting tutorial! Keep up the good work!

@coldemonspl Жыл бұрын

Thank you very much! :)

@Mistakeful_Learning Жыл бұрын

Awesome tutorial, I’m about to start building a Canadian LAV-3 and this guide will be very handy.

@coldemonspl Жыл бұрын

Im really happy you found it helpful! Thx :)

@dukewellington9308 Жыл бұрын

Excellent, I am looking at doing a Bastogne diorama soon. This will come in very handy, thanks

@coldemonspl Жыл бұрын

Thank you very much! :)

@michalsokolowski1208 Жыл бұрын

Super,fajnie wyszła ta zimowa opona.

@coldemonspl Жыл бұрын

Dzieki frend! :)

@paolocapecchi5182 Жыл бұрын

Great tutorial. Really useful tips. Thank you for sharing your techniques.

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@michaelsudsysutherland5353 Ай бұрын

Never watch these at work... It makes you want to walk away just spend your day at the workbench building models!🤣

@coldemonspl Ай бұрын

Thank you very much! :)

@martincsanadi2969 Жыл бұрын

Hervorragendes Tutorial Łukasz! Ich danke dir dafür!! Diese Technik werde ich beim nächsten Projekt anwenden.

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@dctrekker5293 Жыл бұрын

A good tutorial. Thanks for sharing your technique!!!

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@TheWysol666 Жыл бұрын

Afgański Rosomak od ibg wjeżdża na warsztat i będziemy testować 😁

@coldemonspl Жыл бұрын

Powodzenia! :)

@garylawless3608 Жыл бұрын

@coldemonspl Hi Lukasz! A great video on weathering wheels and tires, which is an area that I tend to shortcut a little. However, your videos show us that there are no shortcuts to a good result. I have learnt a lot watching your builds and ‘how to’ videos. Keep them coming my friend, and greetings from Australia 🇦🇺!

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@maxclickenhof1049 Жыл бұрын

Very interesting video. Thank you for sharing your ideas and techniques. I was wondering what drying accelerator you are using.

@coldemonspl Жыл бұрын

Some very old stuff. It is more than 10 years old I suppose :)

@lesthiele4921 Жыл бұрын

Hi Lukasz that was a excellent weathering tutorial, were they the kit 'rubber' tyres or reson replacements? Best regards from Australia 👍👍👍👍

@coldemonspl Жыл бұрын

I use my leftovers :) Thx! :)

@RonHoague Жыл бұрын

Nice work. Much appreciated

@coldemonspl Жыл бұрын

Many thanks! :)

@pawelewandowski59 Жыл бұрын

Genialne 👍😃 super materiał

@coldemonspl Жыл бұрын

Dzięki! :)

@OzzysScaleModelerSecret Жыл бұрын

Coldemonspl nice tutorial :) Well explained and shown , even a beginner can understand it . Also nice to see the different technics you use . Thanks for sharing mate. It was very interesting Well done Coldemonspl !! Have a great week and bench time . Take care Coldemonspl

@coldemonspl Жыл бұрын

Thx a lot mate for your comment!! :)

@ModelMaker993 Жыл бұрын

@coldemonspl thank you for these instructive how to videos. I'm just getting into the weathering side of modelling so really appreciate all the help and showing the products used. I'm just now learning to use my airbrush more effectively too and experimenting with different camo styles (hard/soft edge ect.) Previously I always sprayed free hand and had overspray on almost every model. Any chance of you doing a how to airbrush with ak real colors video in the future please? Keep doing what your doing, fantastic work and stay safe. P.S I'm going to membership up as soon as I get paid as your by far the best model channel I have found.

@coldemonspl Жыл бұрын

Thank you very much for your comment! I try to share my knowledge and experience in my videos. About AK RC you need to check my other videos where I use them. :) And in the future I will probably make some video with using RC colors only - just for beginners. :) cheers!

@ModelMaker993 Жыл бұрын

@@coldemonspl thank you for replying. Tomorrow whilst building models I will look through your videos. Really enjoying them all so far. Look forward to your future videos.

@robertgraham1511 Жыл бұрын

I liked your idea on weathering how ever could you please provide me with the full name of the pigments as well as the website. I would like to try some please.

@coldemonspl Жыл бұрын

Please check www.modellersworld.eu - you can find there all stuff I use in this video :)

@dariuszmarkowicz574 Жыл бұрын

COLDEMONSpl

@coldemonspl Жыл бұрын

@romanionu 7 ай бұрын

I know im a newbie, and im sorry for the next question, but can somebody tell me what he s using to place the tires on the sticks so he can easily work on them? i saw this on various parts at different people. Is it glue or is it something else? And if its glue, isnt after hard to get rid of the stain or to de-attach the part from it? Thank you!

@coldemonspl 7 ай бұрын

Oh yes, the tires on the sticks are easy to operate during the painting and weathering. I don't glue them - they have small holes for the stick. Hope it helps :)

@romanionu 7 ай бұрын

@@coldemonspl oh it def helps! Thank you! But for tires that comes from the kit w/o special holes, do you recommend a way to stuck the parts/tires/figures onto sticks so it can be much easy to paint and handle them? Thanks!

@coldemonspl 7 ай бұрын

@@romanionualways! :)