Coleman B200 mini bike gets a lot faster!

Рет қаралды 10,184

Күн бұрын

Coleman B200 mini bike gets a lot faster!
Installed a VM22 carburetor and a custom exhaust pipe on the 196cc powered Coleman B200 mini bike.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: kzfaq.infofea...
Instagram - Doubledown555Black66
_________________________________________________________________
Parts used -
MB200 header pipe - www.gopowersports.com/header-...
VM22 carburetor - www.amazon.com/gp/product/B0C...
Jet kit - www.ebay.com/itm/134945050961...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Пікірлер: 108

@username-mk8gf 13 күн бұрын

I can't get over how great these mini bike frames look, the b200 has the most bussy, public bench, or play structure aesthetic, super robust and utilitarian. If you adapted an electric hub motor to fit the axel, the frame would hold alot of cargo.

@KoolRanqe 6 күн бұрын

Once the torque converter is installed Regen braking is no longer constant. It coasts

@username-mk8gf 6 күн бұрын

@@KoolRanqe Right, yeah, a torque converter for an electric motor... coasts... Hey while I got your attention, Jesus loves you.

@jamesgravel7755 3 ай бұрын

Couldn’t have nailed that hole any better. I had a buddy like you. His guess was always perfect. I’ll measure and check 50 times and be off by a 1/32nd” and be furious. Lol.

@Black66 3 ай бұрын

LOL yeah I got lucky on that fender.

@Hesham2008A 3 ай бұрын

Getting a billet rod and cast flywheel for my 212, add that with some 22 pound valve springs plus my mikuni, I think I’d be good to remove the governor. I got 18 springs mikuni and just a header pipe, goes 55 MPH, take that 75T to a 60T sprocket with some internal switch hoping for a good 65 MPH. You inspired and teached me a lot, appreciate!

@NubsWithGuns 3 ай бұрын

🤦‍♂🤦🤦‍♀🌴

@streetbuilt1170 3 ай бұрын

My stock 212 with just bolts on header and pipe does 58mph 40t sprocket

@NubsWithGuns 3 ай бұрын

@@streetbuilt1170Interesting. I never checked the speed on mine and guessed 35-40 on my old bike with the 212.(10/50 sprockets and a 30series) Idk though, 35 sounds reasonable to me I guess for my little bolt on hero hemi LOL. I dont want to know how fast my new bike is, Its not.running the best yet and it already seemed faster than it needed to be for a trail bike.😅😂

@streetbuilt1170 2 ай бұрын

@@NubsWithGuns yeah mines a freeway bike so I need top end it has no take off at all but it moves top end 40 tooth rear sprocket and 10 tooth clutch non hemi 212 vm22 carb and $20 header pipe

@NubsWithGuns 2 ай бұрын

@@streetbuilt1170 I want to change the gearing on my new one, 60 tooth on the rear and leave he 10 on the front. Might try a 7inch driven pulley too. 5.3:1 is kinda high for what I do, on the old bike it was good at 50/10 because of the overdrive on the 30 series so it was easy to tune for the gearing. Juggernaut(which I don't actually need I am told but my new bike will; eat up a 30 series in 2 rides max) likes to talk to my rev limiter.(around 5250).

@rogerwilliams4956 3 ай бұрын

Awesome job on the custom exhaust.

@kodimarshall7156 3 ай бұрын

Been watching you for a bit and really appreciate you and your videos, it's really been helping me with my own build! Thank You!

@Black66 3 ай бұрын

Awesome, thank you!

@rosscalloway6257 3 ай бұрын

Great job on the header! Very clean!

@davidpearson8043 3 ай бұрын

Awesome video!

@Callofdutyjoey 3 ай бұрын

Love your videos

@thenexthobby 3 ай бұрын

In case anyone is tempted to go with a center pipe, don’t. Yes you can slightly lower the rear fender by drilling new mounting holes in front so that it pivots down. But even with some heat shielding you’ll burn a hole in the seat right under your ass. Takes a few weeks. Ask me how I know.

@somewhere-n-Texas 2 ай бұрын

Lol ouch

@phoenixmojado527 3 ай бұрын

Haven’t rode those new gen frames but they look like they ride very nicely ✊🏼

@jakedrew7365 3 ай бұрын

High temp black charcoal grill spray paint would look nice on that header pipe. Great video like always. Thanks

@peterbrolmann8853 Ай бұрын

Really inspiring following your series. Am definitely going to get one of these bad boys for myself and mod it out like you 🙏

@Black66 Ай бұрын

Fun bike! I think you will like it.

@Spacecruizer203 3 ай бұрын

You know when God gave us fire he wanted us to ........Make it burn baby 💪🏼💯🔥🔥🔥🔥🔥 pretty bike not really a mini but it's still bad azz

@Angel-lh5cu 3 ай бұрын

Just getting into mini bikes just so happens this is the exact one I bought definitely following your mods list 😅

@Black66 3 ай бұрын

Be sure to check out the video coming out on Wednesday.

@Babymexico502 3 ай бұрын

same😂

@kiks7veliz Ай бұрын

Same! 😂

@TreyGoose Ай бұрын

@@kiks7velizswap the engine to a 224 and remove the governor. No other mods needed. Your welcome

@kiks7veliz Ай бұрын

@@TreyGoose wish we had a harbor freight store in Alaska cause I would definitely buy a predator 224 for it

@johnk6346 3 ай бұрын

Amazing 🤠👍

@BustedKnucklesBuildsTexas 3 ай бұрын

Great video sir

@NubsWithGuns 3 ай бұрын

BRAP BRAP!!🤣😂

@teshuvahemmet3036 3 ай бұрын

Nice 👍

@andrewkuhtz 3 ай бұрын

Awesome video! I like that you modified that pipe to fit on there. It looks sweet! Thats pretty impressive that it got that quick lol. Does that bike have a 10 tooth jackshaft gear like the mega moto 212?

@Deucealive75 3 ай бұрын

I think they come with a 9 tooth.

@SergioM.69 3 ай бұрын

I might consider getting one 🤔

@Throttle_junky 3 ай бұрын

Loved the video and I love the bike dude I appreciate your will to educate communities with your mini bike knowledge. Your like Mr. miyagi when it comes to the engines. 😂😂 so I am going to watch & study all the b200 videos wish I had a torque converter instead of jackshaft it's much easier looks like and gets 50 easy with the 40 tooth

@Black66 3 ай бұрын

Thanks! I have more MB200 videos coming out soon. It gets even faster!

@anthonydesertony2250 3 ай бұрын

Just found your channel and subbed! What if you added some street tires and fabricated a fairing? Do you think you could get some more top-end? It would be a lot of work but I bet it would make a great video!! Can't wait for your next vid.

@NubsWithGuns 3 ай бұрын

So may forget that these were meant to be trail bikes not little crotch rockets lol.

@heavyd5670 3 ай бұрын

Jetting settings? Needle position? Can't wait for the next video!

@Black66 3 ай бұрын

I'm at 3700 foot elevation ,I'm running a 115 main with the stock pilot and the needle in the middle slot for now...

@peteryarhouse8194 14 күн бұрын

Can you please link the foam filter and the gas line filter that you used? Love your videos

@migs610 3 ай бұрын

Do a juggernaut on that setup. To show everyone how well it works even without a bunch of power

@NubsWithGuns 3 ай бұрын

We've seen that about a million times already. Zzzzzzzzzzzzzzzzzz

@robburley9494 3 ай бұрын

Billet flywheel so we can see how much improvement we get from a single mod leaving the rest of the engine as it is.

@Black66 3 ай бұрын

Be sure to check out the next couple videos with this bike.

@6wheeladventure 3 ай бұрын

Bullseye !! That is A#1 job right there ! What is the OD / ID of that header Please ? I'm new at this stuff, I need to do a custom on my B200RSV, that sounds nice !

@Black66 3 ай бұрын

Thanks, the link for the pipe is in the description of the video.

@necatcesur6698 4 күн бұрын

verdiginiz bilgiler çok faydalı mini motorsikletin iskelet şemasını nerden bulabilirim teşekkürler

@groskreutzzdsinn17 2 ай бұрын

Is that stock throttle assembly for the b200 the exact same as the other throttle assemblys for other mini bikes that are stock? I noticed the throttle cable goes in from the back not the side!

@lordfashion9892 3 ай бұрын

yo Black66 im here in Virginia and i subscribed. Hope to meet u someday!

@Black66 3 ай бұрын

Thanks! 👍👍

@ant123_2 Ай бұрын

when installing the carb should there be an on/off or straight to the filter and carb ?

@ant123_2 2 ай бұрын

can I use solderless cable ends instead and if so what size would that be??

@flatearther5780 3 ай бұрын

Dang

@aleccillo3928 2 ай бұрын

What size fuel lines do these take? I ordered a new carb and header for mine. I won’t be riding mine on the road will that damage the carb with all the mud?

@Samuel-ib6ze 3 ай бұрын

Compare a pwk28 and a mikuni 33mm pumper carb

@darrellnichter9894 3 ай бұрын

😎

@accheetah76 24 күн бұрын

Where do you get the correct jets for the carburator used on this project? I'm having a difficult time finding the correct pilot jets.

@Black66 24 күн бұрын

The link for the carb and jets is in the description of the video .

@scarpinoja Ай бұрын

What size silencer does that pipe take?

@bradygainey8043 3 ай бұрын

Dose anyone know where to buy a cast aluminum flywheel for a predator 212 hemi?

@xavieralt2498 3 ай бұрын

Do a 301cc mini bike

@nathanielfisher4269 2 ай бұрын

what is the largest motor that fits in this model? And without any cutting and welding, as well as getting it's top end speed at 70+ mph?

@Black66 2 ай бұрын

I would use a 236 or a small block 263 to achieve 70 MPH j

@DZman-ig1ek 2 ай бұрын

What exaust is that is from omb

@andrewaiello3668 12 күн бұрын

What jet size are you running in the slide carb? And did you have to advance the timing at all on the flywheel?

@Black66 12 күн бұрын

Check out the B200 playlist. It shows the entire engine build and advancing timing . kzfaq.info/get/bejne/b7qbYNdinLORp6s.html

@undagroundhustla 3 ай бұрын

What do you do with the governor arm when you put on a slide carb? I have no experience with a Mikuni style carb.

@Black66 3 ай бұрын

Check out the governor removal video.kzfaq.info/get/bejne/ebFko5Cavrrbdps.html

@undagroundhustla 3 ай бұрын

@@Black66 thank you Sir, but I was planning on keeping it governed. I think I need an adjustable stock carb for my predator 212. I swapped to a 38 jet and it idles high now, now matter how I adjust the black phillips screw on the stock carb, there is no air adjustment screw, it must be a California EPA carb maybe??

@houseoffire72 3 ай бұрын

Damn impressive for basic upgrades..!

@Black66 3 ай бұрын

Thanks!Yeah it turned out pretty good. Check out the next couple videos coming out with this bike.

@houseoffire72 3 ай бұрын

@@Black66 Absolutely I will

@NubsWithGuns 3 ай бұрын

Fix some more things with FIRE! Made me think of Beavis at the city meeting.🤣

@inmyopinion5407 3 ай бұрын

Just did the same exact steps you did with the same carb and mine won’t start, any ideas why?

@Black66 3 ай бұрын

Check out the VM22 video. kzfaq.info/get/bejne/mJuSjJBizK-7h58.html Also check out the B200 playlist for more performance mods. kzfaq.info/get/bejne/b7qbYNdinLORp6s.html

@Angel-lh5cu 25 күн бұрын

Have done everything you did in your videos on my b200 and it runs like dookie did I do something wrong

@S200. 3 ай бұрын

what app do you use for the speed test?

@Black66 3 ай бұрын

I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.

@S200. 3 ай бұрын

@@Black66 thank you

@ashtonwasson3788 3 ай бұрын

Did you have to change the jets?

@Black66 3 ай бұрын

I mention what jets are in the carburetor in the video

@gsx1300rgovroom 3 ай бұрын

get a flywheel a rod a flat top piston a cam and valve springs

@Black66 3 ай бұрын

Watch the next couple video on this bike

@juan8629 3 ай бұрын

Does that motor shake more than the other Coleman mini bikes

@Black66 3 ай бұрын

This one runs fairly smooth.

@juan8629 3 ай бұрын

The reason why I ask is because I own a RB 100 with a predator 212 that has a clutch it runs get I also own a RB 200 which is stock and it has a Jack shaft it’s slow but runs good I just purchased the B200RSV which is stock with a torque converter it shakes a lot and I was wondering if should I take it back

@Black66 3 ай бұрын

@@juan8629

@Dirt-knees 3 ай бұрын

I have the R200 like Black66. Mine shook like crazy and made a terrible noise pushing it around. The motor was mounted crooked. I loosened the motor mounts, took off the torque converter cover and adjusted the motor so the front and rear TQ pulleys were aligned. Noise is gone and very smooth now.

@ThePeoplesGardener Ай бұрын

Did you change the main jet?

@Black66 Ай бұрын

Check out the B200 playlist. It shows all the mods done to the bike. kzfaq.info/get/bejne/oNCkmaWa2qmqf4E.html

@ThePeoplesGardener Ай бұрын

@@Black66 I’ve been following it closely and tried doing each mod on mine. Right now I have a vm22 carb that is running very rich to where the engine Boggs and gives no power. I’m at sea level in south Florida and the jets in the carb are not labeled.

@Black66 Ай бұрын

@@ThePeoplesGardener If you are using the jets that came with the imitation VM22 they are to small .

@ThePeoplesGardener Ай бұрын

@@Black66 I have new jets coming in tomorrow, what size jets do you recommend

@ThePeoplesGardener Ай бұрын

@@Black66 my cam timing was off! It’s running great now