Coleman CT200U Mini Bike Trike Build Ep1 ~ Mini Bike Monday
Рет қаралды 76,870
6 жыл бұрынToday we start the tear down and build of the Coleman trike! This is going to be an awesome ride when its finished. Full suspension mini bike trike. Use those links below and start your own build!!! Don't forget to like, comment and subscribe for more.
Help the channel grow by supporting us on Patreon. Patreon.com/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - rbg_redbeardsgarage14
----------------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
10% Discount Code - red beard
Parts used in this build -
Torque Converter Kit - goo.gl/oMWKzt
Performance Kit - goo.gl/i1zUkv
60 Tooth Mini Bike Sprocket - goo.gl/W6YRjP
420 Chain - goo.gl/ExFJU1
36” Axle - goo.gl/WyHxue
Axle Bearings - goo.gl/CXhFsN
Tires - goo.gl/hcLXGf
Wheels - goo.gl/hU2CRX
Mechanical Brake -goo.gl/P94C4W
8” Brake Disk - goo.gl/ayjyda
60 Tooth Live Axle Sprocket - goo.gl/A3MwHa
Shocks - goo.gl/qdvFcE
----------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukimusic
----------------------------------------------------------------------------------------------------------------
Tools used to make this video Possible
Lincoln Welder - amzn.to/2ufsIQX
Welding Gloves - amzn.to/2sYQBg4
Welding Hood - amzn.to/2tlBNvb
Welding Cart - amzn.to/2tlCHb3
Sony Camcorder - amzn.to/2ufAb2k
Mic - amzn.to/2tVk8rn
----------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
@ThatOneGuy077 6 жыл бұрын
Glad to see someone turning a mini bike into a trike
@rong4189 6 жыл бұрын
Yeah, one shock for sure. One spring, one set of valving adjustments, one set of mounting tabs. When dirt bikes went to single shocks way back when, they never went back. Cool build!
@johnchassie-rideout4927 6 жыл бұрын
Looks awesome. I'll be watching for the next vid. Also can't wait to see what you do when the parts come in for the full suspension build.
@Timberwolf35546 6 жыл бұрын
I have been waiting with baited breath on this conversion. Awesomeness indeed..
@fishingthe910 5 жыл бұрын
Love the Step Brothers reference! This thing looks nice, cant wait to catch up and watch the next couple of episodes of it.
@LuchMobGarage 6 жыл бұрын
I definitely want to do a trike as well. Suspension wasn't even a thought. Again you are the man brother!!
@kingavegarage8722 6 жыл бұрын
I like where this is going. Something different! And a good use of parts that might be "laying around"
@BorosTheGamer5021 6 жыл бұрын
Wow this thing is awesome looking :) it makes me wanna try to build one myself.
@dinerothegodess7839 2 жыл бұрын
I love RBG always making awesome new toys I learn alot about mini bikes engines & parts
@user-neo71665 6 жыл бұрын
I bet that suspension is gonna be nice.
@gchristensen80 6 жыл бұрын
Hey Red, This is a great build!!!! Love the different way of thinking!!! You guys Rock!!!
@RedBeardsGarage 6 жыл бұрын
Thank you man
@franklindeesulliable 6 жыл бұрын
Awesome build. Liking the videos. Those beats are nice. Like that you take advice and use it. Loving u guys
@RedBeardsGarage 6 жыл бұрын
Thanks for watching man
@maxtrigga9952 6 жыл бұрын
Awesome man! Your videos are great keep it up!
@RedBeardsGarage 6 жыл бұрын
Thanks man
@pogonick55 6 жыл бұрын
Holy cow this is going to be so sick. Can't wait to see some wheelies and donuts maybe Lonnie will bust his rear-end and smash a dip can for old time sakes, yee haw haha
@RedBeardsGarage 6 жыл бұрын
Ill talk him into it lol SEND IT
@kennyh5083 6 ай бұрын
Chop the frame to lower the seat for a cushie seat with backrest and THEN ya got her right!@@RedBeardsGarage
@brochslanders1845 6 жыл бұрын
Great vid Red, I learn so much from you. I can't wait till I get my new house later this year so I can start doing some of this stuff myself too. I'm tired of having a 1/3 acre yard, I want a couple of acres at least so my son and I can have a place to ride.
@RedBeardsGarage 6 жыл бұрын
Thanks for watching and Im glad we could help you brother
@g-man8008 6 жыл бұрын
Trike looks great! When you get through it's going to rip! I am a little concerned about your rear axle though. Your mount being so close together makes me think that the axle is going to bend. But if I know you, is going to rip good red beard. No matter what it looks bad to the bone!
@RedBeardsGarage 6 жыл бұрын
Thanks man. I probably will make up some type of axle stiffener
@nolunruff8845 6 жыл бұрын
you can get a drag tip for your plasma cutter so you can rest it on the metal as you cut.
@cocomaster3755 6 жыл бұрын
I still look away at welding 😂😂😂
@dooleydooley4742 6 жыл бұрын
Just like welding it take practice, youll get the hang of it, Red
@charlessledge1703 Жыл бұрын
Very nice
@glennzlotowski7292 6 жыл бұрын
i like it alot
@wilkersonsmowershop8379 6 жыл бұрын
you look pretty good with the fab work there red. if ya can't find an 11" bolt just make one. I end making parts after the old useless run to parts house. keep up the great work.
@RedBeardsGarage 6 жыл бұрын
Yeah I was going to build one out of the jackshaft that was in the tube
@hewfil1 6 жыл бұрын
Hey RedBeard, small suggestion. Rather than a nylon lock-nut, why not just get a larger bolt, drill a hole, then use a castle nut and a pin?
@RedBeardsGarage 6 жыл бұрын
Yeah I probably should just didn't think of it.
@FireAndGasoline 6 жыл бұрын
Awesome, im curious to see how it rides. Gonna be different now that you can't lean to turn.
@RedBeardsGarage 6 жыл бұрын
Yeah I am also curious lol
@FireAndGasoline 6 жыл бұрын
Either way im sure it will be fun!
@schoen88ss 6 жыл бұрын
Good luck keeping a chain on it . Unless you just go with a rigid rear swingarm or Use a jack shaft the way it should be used at the pivot .
@joneserupinsmoke9161 2 жыл бұрын
RBG 👍👍
@mikesmiley336 6 жыл бұрын
I would really like to see you build a Coleman ct200u into a stretched (around 2 feet) utility bike with a larger 23in’ish rear tire. Something more utilitarian. That would be great.
@RedBeardsGarage 6 жыл бұрын
We got a build coming up real soon on a ct200u I think you will like
@mikesmiley336 6 жыл бұрын
Red Beard's Garage Great I look foreword to it.
@collinhetsler4746 6 жыл бұрын
Hey man how’s she going love the videos I learn so much n so many cool things from you an your channel keep up the great content never regret subscribing you guys are by far the best go cart /mini bike channel oh hear you guys should Collaborate with cars n cameras that would be some awesome content peace brother
@RedBeardsGarage 6 жыл бұрын
Thank you for watching and supporting us
@mowerkingedmowingandvacuum7995 6 жыл бұрын
Hell yea
@murphragous 6 жыл бұрын
This beat makes me think you are doing a tutorial on how to clean a pistol or weigh up a sac... not building a mini-trike! haha
@willtrautman6243 6 жыл бұрын
Just get 12 inches of round stock, thread both sides, weld a nut on one side and then you got yourself a bolt, may spend more than you want in tools though😎
@metalworksmachineshop 6 жыл бұрын
plasma cutter, You can't touch the steal with the tip. Some have a drag tip. Nice build..
@kaylapearcey2527 6 жыл бұрын
I need an extra coleman lol.
@vanhornjim 6 жыл бұрын
Tractor supply has the bearing if you have one near you.
@BorosTheGamer5021 6 жыл бұрын
have you two ever thought about making a gas powered Mountain bike? i would love to see it set up to where it uses the 23 speed set of gears that the bike already has on it.
@RedBeardsGarage 6 жыл бұрын
We have one of those 80cc 2 stroke engines but haven't gotten around to install it. It would be crazy to have all those gears
@iadc43 6 жыл бұрын
I think it would be much better to cut the minibike upper backbone pipes out and fit in a single tube upper backbone to mount that tank, instead of cutting up the gas tank to fit how the bike is now. Way better. Just cut them off somewhere near the front of the seat and weld in a cross plate at the front of them, then weld a single pipe from there to the neck.
@17Gtrax 6 жыл бұрын
You should make a kit for this conversion
@MAD450r2 6 жыл бұрын
They were actually on ebay as well if u trust ebay bearings
@jadenhawkins6056 6 жыл бұрын
Red Beards Garage you need to get yourself a plasma cutter
@RedBeardsGarage 6 жыл бұрын
I have one I just need some tips
@robbyfoust4275 6 жыл бұрын
Ace hardware has them bearings cause I needed some and I drove everywhere to find them and then went to ace and there they was
@rncboy2 6 жыл бұрын
This i like this seen some on instagram and snapchat love the build seen this with chinese pit bikes but not a coleman mini bike. Now i be wondering what engine is going on this bad little coleman 3 wheeler🤔
@seancoppinger1569 6 жыл бұрын
So are you worried about the bearings on each end of the swing arm being able to take abuse such as forward and aft movement against the bearing race? I was thinking of doing this same thing instead of the standard bolt through two angle brackets you see on most swing arm hinges.
@shaneh3457 6 жыл бұрын
Tractor supply sells those bearings.
@daleauka1477 6 жыл бұрын
use the back rim on the front then you can weld a tab for the brake and have front brakes too.
@RedBeardsGarage 6 жыл бұрын
I have a plan to do front disk brakes on this
@daleauka1477 6 жыл бұрын
that would be better.
@codymullins734 6 жыл бұрын
You should get four wheeler pegs and nerf bars and put in it!
@RedBeardsGarage 6 жыл бұрын
I didn't even think about that but we will do for sure
@codymullins734 6 жыл бұрын
Sweet! I’m gonna send you what kind I’m talking about on snap!
@nothingfancygokarts8625 6 жыл бұрын
I had the same problem with a plasma cutter. getting the tip too close. you can make a simple guide for the tip that wont allow you to touch the tip to the metal. there are many vids on this too!
@RedBeardsGarage 6 жыл бұрын
Yeah I want to make one for sure. Its gonna be nice having it in the shop for sure
@GodschildinNC 6 жыл бұрын
add a pipe to the frame that fits the tank, instead of having to modify that sweet tank. Maybe plates that bolt to the tank and under the frame rails.
@dustin4139 6 жыл бұрын
Aren't you worried about roll overs? Rear wheel base seems alittle skinny.
@RedBeardsGarage 6 жыл бұрын
It is wider in person but if its a problem we can always throw a wider one on it
@Bizego_innovations 6 жыл бұрын
Check out azusa bearing number 8205. 1 1/4" od x 5/8"id. Hope it helps
@keithw372 6 жыл бұрын
you can make a piece that will keep the tip away from the work you are cutting. just a piece of tubing with the middle cut out so you can see, hard to explain
@RedBeardsGarage 6 жыл бұрын
I think I know what you are talking about. I will see about making one
@user-bh7lz3vg8n 6 жыл бұрын
สุดยอด
@jacobkirchoff3442 6 жыл бұрын
You should rebuild little red.
@RedBeardsGarage 6 жыл бұрын
I should very soon
@justice7558 6 жыл бұрын
I buy my bearings from mfg supply online for like $2 each. They last a really long time.
@crispychiken3886 6 жыл бұрын
Yeee
@dutch4541 2 жыл бұрын
Yo RBG I have a big question. First off in a newbie but have been a structural welder for 20+ years so my fabrication is purtty good. My question is in the rear when you turn the bike the outside wheel would want to move faster than the inside. How do you let this happen without the inside wheel wanting to basically drag the rear? I bought a trike not realizing this until after I unloaded it and tried moving it around the shop to mint the engine.
@MaxMarohn-uv6lp Жыл бұрын
Trying to do the same thing what axles and tires did u use form go power sports
@MAD450r2 6 жыл бұрын
You should have made back portion of swingarm a tad wider. I the rough terrain it may twist on u or worse axle will bend
@RedBeardsGarage 6 жыл бұрын
I can't with wear the sprocket has to ride. I can maybe fab up some sort of brace and I have thought about that some
@jeeper426 6 жыл бұрын
hea redbeard have you tried going through a company such as Midwest Bearing and Chain Co? they were able to find an odd-ball bearing for a project i was helping a couple of friends of mine with, they might have something that would work for your application, also, sweet build, cant wait to see the results
@RedBeardsGarage 6 жыл бұрын
I know where to get the bearings at just didn't have them to put new in this video
@skarekr0w3 6 жыл бұрын
How do you bind the right bearings? I have projects, I need bearings and have no idea how to order them. Any suggestions?
@RedBeardsGarage 6 жыл бұрын
Just find the measurements and go to google
@kennydidntdie6370 6 жыл бұрын
What if you used some axle brackets for shock mounts to the axle and up the the frame then you could easily do dual shocks even though you've probably already done the shocks lol
@RedBeardsGarage 6 жыл бұрын
I actually have not did the shocks lol. I have been thinking of how I want to do it over the last few days lol
@tombenes4461 6 жыл бұрын
Mr.Red Beard the psi on your plasma cutter needs to be higher pressure
@RedBeardsGarage 6 жыл бұрын
I got it set on the psi the cutter recommended
@MrLamu8080 4 жыл бұрын
Hi everyone I have a monster moto e1000 electric I want to do a trike conversion, is this possible with out welding? Just installing a longer axle?
@gabbleredneck6318 6 жыл бұрын
I done the same build
@willhorn6992 6 жыл бұрын
3/4 all thread rod 2 nuts cheaper than bolt
@davidmarshall8857 Жыл бұрын
How did you move your sprocket from outside of Fram to inside of Fram?
@TsunamicFall 6 жыл бұрын
14:11 was that a step brothers reference?
@josecastaneda2150 2 жыл бұрын
Hi I wonder if you have some trike like this with max 31 inches distance side to side in the rear wheels Or if the is a chance to make it Im handicapped person and I need some to move outsiders
@fredkaminski6138 6 жыл бұрын
Cool build! What if instead of a swing arm, you installed an upper and lower A-arm with a coil over shock?! Independent rear suspension! Bitchin!
@RedBeardsGarage 6 жыл бұрын
We would have to run cv axles and a jackshaft and thats a lot to have going on this little mini bike frame.
@gloriousn 6 жыл бұрын
It's called a mono shock not a uni shock RBG
@idk_gfysblitz4255 5 жыл бұрын
Working on my choper indapenden rear suspension
@chevrolet355 6 жыл бұрын
How can I keep my back wheels from binding?
@brycedodgeram9423 6 жыл бұрын
You should make fenders for the back of it
@user-neo71665 6 жыл бұрын
Tractor supply has steel and aluminum boat trailer (small) fenders that would fit pretty good. I'm using a set to redo the busted up plastic fenders on my buggy.
@RedBeardsGarage 6 жыл бұрын
Im going to use two of the stock rear fenders on it
@allenmckinney9533 6 жыл бұрын
You can save yourself some trouble with cutting that pipe off by buying some 1-1/4" steel pipe. Standard 1-3/8" od bearings fit inside 1-1/4" pipe.
@RedBeardsGarage 6 жыл бұрын
Well I was just using what I had so I didn't have to order anything
@allenmckinney9533 6 жыл бұрын
Red Beard's Garage I understand. I got some leaking tires to fix but can't afford to have a shop do it so I'm building a manual tire changer to do it my self. So far I'm only about $15 in the build.
@keithchapman124 6 жыл бұрын
670 and the torque converter
@DeadBaron 6 жыл бұрын
So little of the Coleman is left, is it really still a Coleman? The frame is so basic, bend and weld some tubes together for a frame, make an engine plate, put the original stock parts from the Coleman on it, and you have a second CT200 lol
@michaelangelod5008 6 жыл бұрын
It would be cool if you made a homemade 4 wheeler and put a 8hp 301cc predator
@RedBeardsGarage 6 жыл бұрын
Rather b welding is about to make a new atv
@will-iamhim8519 6 жыл бұрын
I think u should throw a 301 or 420
@ToolinAround 6 жыл бұрын
If you woulda moved the swing arm 12" foreward, you coulda had a monoshock minibike
@RedBeardsGarage 6 жыл бұрын
Already have it with the way i set it up
@user-rd1wh1xi7v Жыл бұрын
🙂 Рыжая борода Рулит!😂 в хорошем сиысле слова.👍🏻
@duggers1130 6 жыл бұрын
Any info on when the front fork kit will be available?
@RedBeardsGarage 6 жыл бұрын
Talking with Coleman tomorrow and Ill find out
@youthfulcross4411 6 жыл бұрын
Ngl I think this think needs the be a drag build
@timothysizemore8574 6 жыл бұрын
What type of tripple clamps did he use
@06cummins41 6 жыл бұрын
Well I better make new plans
@92silverado32 6 жыл бұрын
Can you talk about how to take about the rear brake on a mini bike?
@melissacook4335 6 жыл бұрын
You should make luxury kart with velvet interior and hydraulic brakes windshield and stereo
@RedBeardsGarage 6 жыл бұрын
We want to lol very soon sir
@melissacook4335 6 жыл бұрын
Red Beard's Garage you don’t have to call me sir I just turned eleven
@Tahmanakki 2 жыл бұрын
@@melissacook4335 homie should be 15 now
@willtrautman6243 6 жыл бұрын
You gotta start somewhere
@oldreliable303 6 жыл бұрын
ive wanted to do that for so long. but no i just cut up a old kawasaki and put a 16hp flathead briggs on it...
@bradt9244 6 жыл бұрын
this would be awesomererer lol if it was dragster with nitrous and murdered out with flat black paint
@john7630 Жыл бұрын
Next next next....................?
@haydenrhodes8782 3 жыл бұрын
Go power sports no longer sales the axle😔 does anyone know we’re I can get one like it
@MAD450r2 6 жыл бұрын
For some pointers on using plasma cutter try messaging Mustie1 on youtube. Very nice guy he has been using one a while. Maybe he can help u get past the learning curve
@RedBeardsGarage 6 жыл бұрын
I actually have watched that guy before. I need to catch up on his videos
@MrKoolkat122 6 жыл бұрын
First!
@jamiehancock801 6 жыл бұрын
What size axle is that I've been thinking of doing this for a long time
@RedBeardsGarage 6 жыл бұрын
I think its a 36"
@jamiehancock801 6 жыл бұрын
Red Beard's Garage thanks I really wasn't sure what to try to start but that size looks good with the bike
@dfporkchop 6 жыл бұрын
Put a 420 on it
@xragegamingx1880 3 жыл бұрын
I need to know what breaks you used
@jessejspivey1 5 жыл бұрын
I've been searching for kits too do this and I can't find any, Do you know what parts it took, Or where you got the kit? UPDATE: Do you know the total price of all the parts
@RedBeardsGarage 5 жыл бұрын
I listed all the parts in the description of the video. You can add them all up and see what it would be
@mikeshobbiesandrandomstuff 6 жыл бұрын
Put a Honda atc 200e motor on it 82-83 chain drive it fits in that frame I'm told.
@RedBeardsGarage 6 жыл бұрын
If I could find one I would
@mikeshobbiesandrandomstuff 6 жыл бұрын
Red Beard's Garage Craigslist and knocking on doors at old farms.old farms is usually the best price.
@chrismichael5016 6 жыл бұрын
It needs a 670cc
@jimmymeyer7758 6 жыл бұрын
Grease fitting for the swing arm???? my bad :-)
@dominiquedavis9742 6 жыл бұрын
Hey I just bought a live axel set and I tried to use the code but it wouldn't let me but I order through Gary he gave me the deal who ever that is so just letting you no to check on your code
GLOBE 🌏
Рет қаралды 5 МЛН
i_roblox_queen
Рет қаралды 5 МЛН