Fantastic and quick! (I would suggest stabilizing the camera some as I was starting to get dizzy)

Excellent explanation of the process involved in the generator function.

I enjoyed this, I have seen all the lamps before but never a " propane tree " the 1st that you lit .. It is a great idea thanks

Great vid. Great info part of the vid the camera was looking at the ground so missed what was going on.

Mate! That was excellent. Well done, well rounded video giving all the advice people need to get started and understand the purpose of a vaporiser. Ken bruce Australia

You can use vm&p naphtha as a fuel source as it is very similar to white gas

Great vid! And like the mix idea But FYI flash point is the temperature a fuel will gives off Ignitable vapours

Another awesome video. I have used propane lanterns outside before, but not liquid fuel lanterns, and this is great in how straightforward and complete your instructions are. Thanks!

I used to be on the "don't run pump gas" bandwagon. While I still prefer the cleaner white gas, those deposits you speak of take hundreds and hundreds of hours of operation to cause any issues, and those issues can be undone in minutes if you know what you're doing. I DO recommend thoroughly rinsing the tank with white gas before storage though. You recommend high octane gas. What are your reasons for this recommendation? Octane rating relates to anti knock characteristics in internal combustion engines. Lanterns and stoves don't knock. High octane fuel actually burns slower than low octane fuel. What effects does low octane gas have on a lantern that high octane gas doesn't? What engineering features do the dual fuel appliances have that the non dual fuel ones don't? In fairness, I used to just take other experienced Coleman users word for it that pump gas was bad. And I vociferously passed that information on. I WAS WRONG. In fact it was a sort of watershed moment for me. I make it a point now to only pass on information that I have good evidence for. I'm not perfect, but I'm getting close....haha! See the pump gas challenge from Frank at Old Town Coleman here: kzfaq.info/get/bejne/nJOAfMuGttq7lWw.html He has run over 65 tanks of both fuels, side by side in identical lanterns with no issues. 65 TANKS! Most Coleman lanterns run for about 10 hours on a tank of fuel. That's 650 hours. Nearly a full month of continuous operation. Pump gas isn't perfect. The smell of spilled White gas goes away as soon as it's dry. Not so much with pump gas. Pump gas will degrade in storage much faster than white gas. I've had lanterns that were filled and sat unused for many years and the fuel smelled and worked just fine. But pump gas is not any more dangerous to use than white gas. The appliances run just fine on it. And it won't ruin the appliances it's burned in. If you DON'T want of clean and restore you're old generators yourself, you can pay for a LOT of brand new generators with the fuel savings alone. For old valuable collectible models, I get it. Some of those generators are not even made anymore, and some are not easily cleaned and serviced. Stick with the white gas for those.

Great video. Have you ever tried a pre heater cup with denatured alcohol in the dual fuel lantern? It would seemed to me that it would combine your lighting process without the need to remove the vent and globe.

Great vid, I have a few questions I have a 339 coleman kerosene lantern . I fired it up today and it was super bright, my mantle slightly rests on the generator is this a problem / normal? I let it cool for like 20 mins but filled the precup again as it was burning off the cup it was flaring up alot mantle catching fire etc. Did this mean it was already hot and could have done with just a little bit of preheat rather than a full cup again as the generator was already hot? Thanks

Good stuff

No if you're going to use pump gas use the lowest octane you can find! Higher octane fuel is harder to ignite and won't burn as clean in a lantern and will take longer to vaporize. Also you can run regular unleaded in ANY white gas coleman lantern or stove but yes it will soot up the genorator slightly faster than white gas. I've used regular pump gas almost exclusively for a little over 30 years in all my lanterns and stoves with no I'll effect. It's biggest drawback is it's no good for long term storage.

are you familiar with the jc higgins lantern: what is the history; were they made by coleman for sears, or was it another manufacturer? i have had this lantern for a decade or so, and just getting around to trying to use it and having trouble finding information on rehabbing and starting it, thanks

Thank you

Right now, propane is $4.59 for filling a 20 pound tank. Kerosene in one gallon jug is $30.00. Great vid. Made up my mind. Propane. Besides, a propane lantern is half the price of a dual fuel.

NICE!! I just bought an old Coleman lantern because I can't stand that weird light the LED lanterns put out. When I'm camping I want that warm natural light of the old lanterns. PLEASE tell me you can help if I can't get my old Coleman I just bought up and working

Remove the abspestos tube in the old lanterns generator and replace it with a rolled up piece of fine copper mesh (arts crafts stores) , and you can run unleaded, but it wont burn as bright.

May have been mentioned before but he lit a torch with a lighter to light the lanturn.

Could you purchase and rebuild a "Coleman CQ Lamp"?

kerosene mixture lowers the flash point? makes the burn less dirty??? easier starting?

can you please make a video starting from how to install and burn properly the mantels and how fragile they are so need always to carry spare ones. I would like to see how do you deal with tying the mantels and the process after that ; that is something we all need to do even before lighting the lamps and better get it right .Maybe explain the different mantels there is and do all can use what ever we can get at the stores? Thanks for your videos because this is something we all need to know in a emergency when we need light even in the city for blackouts nowadays . cheers.

I used aviation fuel in my colemans , way out in the remote wilds of Alaska a , 2 mo. Outing on my winter trap line venture !! This was cheaper and better to go long peroids of time !!!

Method 2 is the Best !

Amazing video!!!! (could use a better camera man though...)

Just a note about the flashpoint of kerosene. Yes the flashpoint of kerosene is higher than gasoline but that means that gasoline will vaporize and give off enough fumes that can combust at a lower temperature..thus making gasoline much more combustible and flammable than kerosene. An easy test to see this affect is to pour a small amount of each fuel into separate containers. You will see that the gasoline will have fumes coming off of it while the kerosene will not.

Very good vid but camera guy lacking …

There isn’t anything wrong with burning unleaded in any Coleman product. I think all Coleman’s are dual fuel. I legitimately think the term dual fuel is just Coleman marketing. I’ve used unleaded a number of times and I can’t tell any difference.

The audio would have been much better if you didn't turn on that noise maker as the first thing you did.

kerosene is a very energy dense fuel which is why it burns so brightly...

Lol, your camera person sucks, but it's very useful information. Thanks so much

Shoot you can’t find denatured alcohol in California. I think they banned it. What else could be used?

Your camera man or women is not too good , I could not see things that I really wanted to see good because I'm having problems lighting mine and I always used coleman fuel and I figured the Crown fuel was the same and I can't get my duel fuel to light

im gettin dizzy.

you need a better camera person! someone who can hold a camera without swinging it like a pendulum .

That's always Coleman's party trick and selling point. All the liquid gas Coleman's will burn gasoline. It's been this way since the 1960's. So saying gasoline will only work in a Dual Fuel is a lie.

One important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?

You burn Kerosene in lanterns that are designed for this , do not put Kerosene in a white gas lanterns . This was not covered with enough stress .